Trax Lupleco

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm Chedpfx Aljz Iylds Aec • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2009, total length: 8,400 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 6,770 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lifting Axle - Alloy Wheels - Air Suspension - Drum Brakes = Notes = 11/2009 VAN HOOL 20FT ADR (EX/II, EX/III, FL, AT) chassis with ABS/EBS, SAF axles with drum brakes, lifting axle on the 1st axle, ALCOA wheels, unladen weight: 3,300 kg, permissible total weight: 39,000 kg, tires 385/65-R22.5 (tread depth left: 6/12/8 mm; tread depth right: 6/6/6 mm), Dutch registration. = Further Information = Axle Configuration Tire Size: 385/65-R22.5 Axle Brand: SAF DRUM Brakes: Drum Brakes Suspension: Air Suspension Rear Axle 1: Alloy wheels; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 2: Alloy wheels; Max. axle load: 9000 kg; Tire tread depth left: 75%; Tire tread depth right: 40% Rear Axle 3: Alloy wheels; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 40% Weights Unladen weight: 3,300 kg Payload: 35,700 kg GVW: 39,000 kg Functional Body Brand: Van Hool 3B2013 Condition Technical condition: good Codpfx Aloz Iyfwo Aehc Optical condition: good Identification License Plate: OK-02-YF

Condition: ready for operation (used), Year of construction: 2001, This 4-axis HELLER MCH 250 was manufactured in 2001. It features a robust coolant/filter unit, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. - Voltage: 400 V (3~)- Frequency: 50 Hz- Nominal Current: 185 A Chedpoz Iyfqsfx Al Asc

Condition: used, Year of construction: 2007, operating hours: 30,271 h, functionality: fully functional, machine/vehicle number: 147, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,950 mm, controller manufacturer: Fanuc, controller model: 15i, total height: 4,500 mm, total length: 5,500 mm, total width: 6,500 mm, table load: 8,000 kg, rotational speed (max.): 4,000 rpm, overall weight: 40,000 kg, spindle speed (max.): 4,000 rpm, operating hours of spindle: 30,251 h, coolant supply: 70 bar, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Good used MITSUI SEIKI HU 150 A for sale - Fanuc 15i control - Knoll high-pressure system, 200 liters, 70 bar - Chip conveyor Chjdpfez Iyd Tox Al Ajc - Tool magazine, 120 positions, BT 50 - NC table, 0.001° accuracy - 2 pallets, 1500 x 1500 mm - Extended Z-axis - Machine can be inspected while powered on - Year of manufacture: 2007 - Linear scales in all axes

Condition: excellent (used), functionality: fully functional, mileage: 175,000 km, first registration: 11/2017, fuel type: diesel, overall weight: 16,000 kg, tire size: 285/70R19,5, tire condition: 70 %, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, suspension: air, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, EBS, air conditioning, airbag, blind spot assist, crane, cruise control, electronic stability program (ESP), lane keeping assist, navigation system, non-smoking vehicle, parking heater, power assisted steering, seat heater, traction control, truck registration, HIAB CRANE. Codpfx Aoz Iyd Hjl Ashc

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, MACHINE BUILT 2008 / COMPLETELY REFURBISHED 2026 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Codpfxoz Iydys Al Ajhc Type - MKW RAPID UT - System Belt conveyor table 16 - Number of stations Special - Format 35 x 64 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 16 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 64 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2010, loading space length: 13,580 mm, loading space width: 2,490 mm, loading space height: 2,980 mm, total length: 13,910 mm, total width: 2,550 mm, suspension: air, tire size: 435/50R 19.5, tire condition: 20 %, wheelbase: 8,750 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 435/50R 19.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Chjdpfx Aoz Iydtel Aec Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.840 kg Carrying capacity: 31.160 kg GVW: 39.000 kg Identification Registration number: OK-96-ZZ

Condition: used, axle configuration: 2 axles, first registration: 11/2015, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles Chsdpfxoz Iydmj Al Aoc - Disc brakes - SAF Assen = More information = Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Tail lift: BÄR, tail lift

Condition: good (used), Workpiece width: 1,200 mm Workpiece height: 500 mm Drill diameter: 8 - 40 mm Number of drilling spindles: 3 pcs. Spindle speed: 150 - 1,100 rpm Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drill diameter: 8 - 40 mm Spindle speed: 150 - 1,100 rpm Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid retract: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Saw unit Saw blade diameter: 1,430 mm Saw blade type: HSS segment saw blade Saw blade dimension: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid retract: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of drilling unit: 43.0 kW Installed total power of the complete drilling and sawing system: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Cjdpfxez Iydge Al Ashc Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: used, Year of construction: 2021, operating hours: 1,556 h, 2021 | Kubota U50-5 with 3 excavator buckets | Used Mini Excavator < 7t | 1556 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 31900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 59 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine worked well during the inspection. It has low hours and has been very well maintained. 📄 Want to see the full inspection, extra photos, or a video? Codpsz Iydasfx Al Ashc Tip: The reference "39892 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2011, total length: 8,400 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 6,770 mm, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lifting axle - Aluminum rims - Air suspension - Disc brakes = Notes = 2011 Van Hool 20FT ADR (EX/II, EX/III, FL, AT) chassis with ABS/EBS, Mercedes-Benz axles with disc brakes, lifting axle on the 1st and 2nd axles, galvanized chassis, ALCOA rims, rear entry, unladen weight: 3,300 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 5/14/9 mm; tread depth right: 5/15/6 mm), Dutch registration = Additional information = Axle configuration Tire size: 385/65-R22.5 Axle brand: Mercedes-Benz Disc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Aluminum rims; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 95% Rear axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 55%; Tire tread depth right: 39% Weights Unladen weight: 3,300 kg Payload: 35,700 kg GVWR: 39,000 kg Cjdjz Iyc Ajpfx Al Aehc Condition Technical condition: good Optical condition: good Identification Registration number: OL-88-GP Additional information Please contact Arne Honingh for further information.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 900 mm, number of axes: 3, This 3-axis ZEISS Contura 9/12/8 RDS was manufactured in 2019. It features a power rating of up to 600 VA, making it suitable for various applications. If you are looking to get high-quality measurement capabilities, consider the ZEISS Contura 9/12/8 RDS CMM machine we have for sale. Contact us for further details. Chodoz Iycpepfx Al Aoc - Revision: REV 02- Electrical Phase/Supply: 1/N/PE- Voltage: 100-240 V~- Frequency: 50-60 Hz- Power Rating: max. 600 VA

Condition: good (used), Saw blade diameter: 1310 mm Chjdpez Iyccjfx Al Aoc Cutting diameter: 440 mm Machine weight: approx. 7.5 tons

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 280 kg, type of input current: AC, input voltage: 230 V, Allpress RIES container compactor CP 1.100, suitable for compressing recyclable materials and waste into 700 to 1,100 standard containers. The high compression rate reduces your disposal costs. No damage to the containers during compaction. Very well suited for situations with limited space. Safe operation thanks to the 2-hand control system. Chodpfx Alez Iyb Se Aoc

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: C124207, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,700 kg, Equipment: CE marking, BAZ: Emmegi BAZ Centro Di Lavoro Phantomatic M3 (C124207), manufactured in 2020 Chjdpfx Aez Iyb Esl Aoc Technical data: Weight 1,700 kg, compressed air 6–8 bar, 6.5 kW, 10 A, 400/3 V, 50 Hz. BAZ with screen/control unit. 3+1-axis machining center for aluminum, PVC, and steel profiles. 2 clamps. Location: Nuremberg/Krottenbach Inspection/test run: by appointment VAT: shown separately

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 800 mm, controller manufacturer: FANUC, controller model: 310i, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HELLER H5000 was manufactured in 2009. It features a Fanuc 310i control system, ensuring reliable operation. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 horizontal machining centre we have for sale. Contact us for further details. Cedpfx Asz Iybrjl Aehc - Year of Construction: 2009- Voltage: 400 V (3~)- Frequency: 50 Hz- Nominal Current: 99 A

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, load capacity: 2,500 kg, Abus VS 2500kg crane, with an approximate reach of 3m, and a height of approximately 3.35m under the bridge crane beam. The crane arm rotates and the hoist travels electrically. Sold without warranty or guarantee. Chsdpez Iyblofx Al Ajc

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,110 h, functionality: fully functional, machine/vehicle number: 027.0500, workpiece weight (max.): 80 kg, total width: 2,200 mm, total length: 2,700 mm, total height: 1,800 mm, distance between centers: 600 mm, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, input frequency: 50 Hz, input voltage: 380 V, space requirement height: 170 mm, tailstock quill stroke: 70 mm, Equipment: CE marking, Universal CNC Grinding Machine for Sale - Type: STUDER S33, Series 75 - Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: - Table tilt: +8.5° - X-axis travel: 285 mm - B-axis travel: 800 mm - Grinding angle adjustment: -15° to +195° (1° increments) - Grinding wheel: 500x63 mm, 50 m/s - Distance between centers: 600 mm (max. load 80 kg) - Collets: B32 - Tailstock quill travel: 63 mm Chjdpfx Ajz Iybfel Aoc - Tailstock fine adjustment: 0.04 mm - Control unit: FANUC 21-TB, 10.4" - Memory: 64 KB - Coolant tank: 375 L with automatic paper filter feed ADDITIONAL EQUIPMENT: - Steady rest: ARBOTECH – GR – 055V - MARPOSS device: UNIMAR S30 - MARPOSS device: P4 - Grinding wheel balancing system: MPM The S33 grinding machine is equipped with a MARPOSS device for fast and precise workpiece measurement, an ARBOTECH auxiliary device for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has undergone regular annual servicing by the manufacturer, STUDER. It is highly precise and in excellent condition. It was used for toolmaking production runs of up to 50 pieces. It is connected to the power supply and ready for operation.

Condition: used, functionality: fully functional, Year of construction: 2019, color: grey, overall weight: 16,000 kg, empty load weight: 2,400 kg, loading space volume: 43 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,448 mm, container length: 24 ft, machine/vehicle number: MLS 5009, BDF interchangeable platform / demountable body with portal doors / furniture box!!! Length: 7.45 m Csdpfx Alsz Iya Ij Ajhc * Smooth-walled box * Sturdy portal doors with internal rotating locks * Screen-printed floor, suitable for forklift operation * Completely lined with felt * 3 anchor rails - lashing rails on the side walls * Support legs, height-adjustable, parking height 1.02 - 1.32 m * Hot-dip galvanized frame / legs and crossbars * UVV inspection available upon request! We constantly have larger quantities of various manufacturers and designs in stock for sale or rental!!! Rental from 6.50 euros per day! Delivery possible throughout Germany! All prices are net plus statutory VAT. Errors and prior sale reserved!

Condition: used, Year of construction: 2006, operating hours: 28,491 h, machine/vehicle number: 309, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Fanuc, controller model: 15i, workpiece weight (max.): 5,000 kg, table load: 5,000 kg, overall weight: 28,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 29,840 h, coolant supply: 70 bar, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI 100 A Year of manufacture: 2006 Chodsz Iyauspfx Al Aec 120-tool magazine, BT 50 Knoll high-pressure system, 2000 liters, 70 bar Chip conveyor Pallets, 1000x1000 mm NC table, 0.001° Linear scales in all axes Spindle speed: 6000 rpm Can be inspected while in operation.

Condition: ready for operation (used), Year of construction: 2020, total width: 2,200 mm, total height: 2,180 mm, overall weight: 2,600 kg, cutting length (max.): 6,150 mm, product length (max.): 8,015 mm, Circular Wood Saw manufactured in 2020. This CENTAURO SL Gold 6000 features a cutting length of 5,900–6,150 mm, a cutting height of 160 mm, and a cutting width of 600 mm. It is equipped with a saw blade diameter of 550 mm and an adjustable blade feed speed of up to 80 m/min. If you are looking to get high-quality cutting capabilities, consider the CENTAURO SL Gold 6000 machine we have for sale. Contact us for further details. • Cutting length: 5,900–6,150 mm • Cutting height: 160 mm • Cutting width: 600 mm • Saw blade diameter: 550 mm • Blade feed speed: adjustable 0–80 m/min • Blade motor power: 11 kW / 15 HP • Total installed power: 12.85 kW Codpfx Ajz Iyanjl Ashc • Electronic control: TOP7, 7" touchscreen • Ethernet connection • Pneumatic operating pressure: 6 bar • Dust extraction outlets: 2 × Ø130 mm + 1 × Ø200 mm • Two-speed fence movement • 3-position saw blade height • Blade feed with gear motor and 3-phase inverter

Condition: like new (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 133 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,500 rpm, total length: 6,147 mm, total width: 3,345 mm, overall weight: 930 kg, table height: 890 mm, Equipment: CE marking, saw blade guard, FORMAT-4 KAPPA 400 | 3 automatic axes | 2016 | JBS Maszyny For sale: a professional FORMAT-4 KAPPA 400 panel saw from 2016, manufactured in Austria. Designed for precise cutting of solid wood, furniture panels, and wood-based materials. The machine is equipped with 3 automatically controlled axes, a digital parameter display, and an X-Roll sliding table. Electric adjustment of the blade height and angle, as well as automatic positioning of the parallel fence, facilitate adjustment and ensure consistent results. TECHNICAL SPECIFICATIONS: – Manufacturer: FORMAT-4 – Model: KAPPA 400 – Year of manufacture: 2016 – Country of manufacture: Austria – Motor power: 7.35 kW, S6 – 40% – Power supply: 400 V / 50 Hz / 3 phases – Rated current: 14.5 A – Main blade diameter: 250–400 mm – Maximum cutting height: 133 mm – Blade tilt range: 0–45° – Rotational speeds: 3500 / 4500 / 5500 rpm EQUIPMENT: – 3 automatically controlled axes – Electric blade height adjustment – Electric blade tilt angle adjustment – Automatic parallel fence setting – Digital parameter display – X-Roll sliding table – 1500 mm extending table Chedez Iyabjpfx Al Ajc – 3200 mm crosscut fence – 2 stops on the crosscut fence – Scoring blade Robust construction for professional use in carpentry and furniture workshops. Used machine. Visual condition as shown in the photos. Details regarding technical condition and equipment available upon request. We will gladly provide additional information and send photos. We can arrange transport to the specified address for an additional fee. Please feel free to contact us and check out our other listings. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, load capacity: 500 kg, Vetter 500kg crane, with a reach of 2.5m from the pivot point. Lifting height under the bridge crane is 3.4m. Intermediate plate included. Sold without warranty or guarantee. Chodpfx Alez Ix U Ro Ajc

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. The modular high-bay system is ideal for logistics operations, industrial facilities, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet rack solution provides an efficient method for storing Euro pallets and heavy unit loads. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 10,080 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm (PNB0472) - Beam colour: yellow, painted - Uprights: approx. 520 x 110 cm, pre-assembled - Upright colour: blue, painted - Levels: floor + 2 - Pallet locations: 333 incl. floor positions - Version: Used STOW SCOPE OF DELIVERY: - 037 x uprights (approx. 520 x 110 cm), pre-assembled - 144 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 288 x locking pins Price: €8,430.00 net €10,031.70 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany through our partner forwarding company – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quotation tailored to your individual requirements. Whether you need a new installation, modification, or extension, we offer expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On-site, you can get a comprehensive impression of our pallet racking, storage racks, and additional solutions. Many systems are assembled and available for direct demonstration. Our specialist consultants are happy to answer your questions and offer tailored advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many current offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone call. Our telephone number can be found on our company page. ☎️ We are available from Monday to Friday, 08:00 to 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible. Chedpsz Ix U Dofx Al Ajc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 5-axis machining center Hedelius ACURA 65, including standby magazine Control system: TNC 640 Year of manufacture: 2017 Internal machine number: 80 Travel distances: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Chedsz Ix Uwopfx Al Ajc Rotary-swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 positions Spindle speed: 50 - 14,000 rpm Accessories Standby magazine with 180 spaces Incline bed coolant system SKM 900 Chip conveyor LTA extraction system 3D measuring probe Coolant gun KinematicOpt