България

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Ljdpfx Aozvnfwjfwohk Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2005.09 261, overall weight: 12,500 kg, power: 180 kW (244.73 HP), input frequency: 50 Hz, input current: 350 A, input voltage: 400 V, Working machine. Planned dismantlig 2026-12 Lhodpjzu I Ehjfx Afwek no manual or documents.

Condition: used, Year of construction: 2019, Calibration grinding machine Manufacturer: Lingi Jianzhong Type: BSG2613C Year of manufacture: 2019 Technical data - Maximum working width: 1300 mm - Processing thickness: 5-80 mm - Processing length: 780 mm Ledpfszuzc Tsx Afwohk - Processing accuracy: 0.08 mm - Dimensions of the grinding belt: 1350x2800 mm - Grinding belt speed: 31 m/s - Roller diameter: 2x 320 mm - Total power: 165 kW - Main motor power: 2x 75 kW - Feed motor: 11 kW - Lifting motor: 2x 0.75 kW - Brush motor: 2x 0.75 kW - Feed speed: 10 - 30 m/min - Operating air pressure: 0.5 - 0.8 MPa - Volume of the dust extraction container: 24000 m³/h - Weight: 14.5 t - Overall dimensions: 3100x2100x3000 mm - Voltage: 380V 50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, Wide belt sanding machine Lhedpezuzcyjfx Afwok Manufacturer: Viet Type: S3 223TM Year of manufacture: 2006 Technical data - Sanding width 1300 mm - 1st cross belt unit - 2nd combination unit for calibration and sanding shoe - The sanding shoe is equipped with feeler segments at 25 mm intervals and is also ideally suited for sanding lacquered surfaces - Brush roller for dust removal from the sanded surfaces - Vacuum transport belt - Ionization bar to prevent static charging at the machine outlet - The control display was replaced with a new one 2 years ago Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm Lhsdpfx Aozuzbcofwsk - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Max working width : 52 - 1350 mm Lhjdpfjzuvy Hox Afwek Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Configuration : 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Extra 15 package of sanding paper included( brand new )

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working width: 1350 mm Abrasive belt width: 1350–1380 mm Abrasive belt length: 2150 mm 1 contact roller unit 1 combined sanding unit EPS 52 – Segmented electro-pneumatic pressure shoe. Constant workpiece inlet height: 900 mm. Abrasive belt drive with wear-free system. Abrasive belt blowing device Machine safety stop in case of improper use 7" graphic touch-screen display Conveyor belt feed with: adjustable feed speed via inverter, from 3 to 15 m/min. Infeed roller table, 250 mm wide, with rubber-coated rollers. Total installed power: approximately 33 kW Weight: approximately 4,000 kg Includes infeed and outfeed conveyors Lhodpfjzumywjx Afwjk Few operating hours, used for approximately 3 years

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr Ljdpfjztat Usx Afwehk

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,600 kg, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, grinding belt width: 1,400 mm, workpiece width (max.): 1,350 mm, Heesemann HSM.3 multi-purpose surface grinding machine with crosshead unit, calibration unit, and DB-S unit. An all-rounder in a compact space. Calibrating, veneer and lacquer sanding, texturing, polishing, sanding fillers, edge rounding, ... - Automatic workpiece thickness measurement - Adjustable vacuum, integrated into the machine body - Height adjustment not via a chain drive, but via direct drive - Non-driven rollers at the infeed and outfeed (2 each) - Industrial PC 15.6", terminal on the front left - Program memory for up to 1000 programs - Feed rate 3 - 15 m/min - MMI package - Program for remote maintenance - Program for dust extraction flap control - Cross-sanding unit, 15 kW, stepless sanding belt speed, for veneer sanding (longitudinal and transverse), lacquer sanding, saw-rough effect, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Longitudinal sanding unit with pressure lamella belt and calibration function, 15 kW, stepless sanding belt speed, calibrating, fine sanding, and lacquer sanding, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Rotating disc brush unit DB-S, for fine sanding, lacquer sanding, edge rounding, sanding fillers, polishing, texturing - Uninterruptible power supply - Energy Management System EMS - Ionization bar from above - Workpiece extraction system with individually controllable, rotating compressed air nozzles, inside the machine frame, conveyor belt cleaning program Lodpfx Asztafwofwshk - LED lighting in the machine - and much more The machine is available in our showroom for demonstrations. Inspections and trial runs can be arranged by appointment.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, grinding width: 1,360 mm, grinding height: 160 mm, grinding belt speed: 18 mm/s, grinding belt length: 2,150 mm, 1. Unit with rubber contact roller/calibrating roller, motor power 15 kW 2. Unit - combined unit with rubber contact roller and grinding shoe, motor power 11 kW Feed rate 4+8 m/min Grinding height 3 - 160 mm Dimensions: approx. 2060x2660x2100 mm (W x D x H) Weight: approx. 3,800 kg Lodpfx Aszr D Erofwohk The machine will be available from approximately the end of November/beginning of December.

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: - Working width: approx. 1,300 mm - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW Lodpfjzryxnox Afwjhk

Condition: used, machine/vehicle number: 008702, Max. machining width: 1350 mm Lhjdezq Urgopfx Afwjk Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and paint sanding capability Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of painted surfaces. Edge-banding machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35mm Contact roller pneumatically adjustable, low wear due to serrated steel roller Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height of 900mm by adjusting the upper part of the machine, thus also integrable in sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Lhodpfozqvmrox Afwek Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and folding outlet table Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure bar application points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking Operating manual Without the illustrated connection cable Original paint, only retouched in some areas Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (L x W x H). Weight approx. 2400kg. The machine can be demonstrated on site by arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, machine/vehicle number: 008654, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes Lodjzpfbispfx Afwehk No. Operating units: 2 Nr sectioned swab: yes

Condition: new, Year of construction: 2024, functionality: fully functional, UNITEK NICE 950 2N RKRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Sanding roller, rubber-coated, Ø 150 Finishing pad 50 mm Sanding belt motor power 15 HP Sanding belt speed 18/16 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning rollers Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 2 pcs. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Belt motor power 20 HP Automatic conveyor belt centering Oscillating cleaning blower, timer-controlled, 2 pcs. UNITEK NICE 950 1N KRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning roller Lhodeznwp Ajpfx Afwok Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 1 pc. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Oscillating cleaning blower, timer-controlled UNITEK NICE 650 1N KRT Working width 650 mm Sanding belt size width x length 670 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/sec Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Self-centering of sanding belts using the system “ECO GEAR SYSTEM” Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness 2 rollers on infeed and outfeed table 1 dust extraction port Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Mobile cleaning blower for the sanding belt Warranty 12 months on spare parts.

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 electronic segmented sanding pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Lodpfxsznvp Io Afwehk Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP Lhedozlxp Sopfx Afwjk • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: completely inspected + serviced Equipment and technical data: Lhedozlbpnspfx Afwsk - Incl. combi unit with contact roller and sanding pad - with height-adjustable contact roller for calibrating - with workpiece-controlled air-cushion pressure pad - 4-way adjustable grit compensation - with pneumatic belt tensioning device - with a rotating texturing brush on the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed infinitely variable 2.5 - 12.5 m/min. - with roller table at the infeed - with separate additional texturing brush - with roller table at the outfeed - with digital display device for the electric-motor-driven workpiece thickness adjustment - with automatic workpiece thickness adjustment - Extraction ports 2 x 200 mm - Feed belt is OK; has a defect in one place (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Images show the machine in a not-yet-inspected condition! Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2008, operating hours: 4,300 h, functionality: fully functional, grinding belt width: 2,000 mm, Finishing sander equipped with: Lsdpfx Aszk S Nvofwehk 1 belt with CSD pad, width: 2000 mm 1 belt with CSD pad, width: 2000 mm

Condition: used, Year of construction: 2008, operating hours: 4,300 h, overall weight: 16,000 kg, grinding belt speed: 14 mm/s, grinding belt length: 2,620 mm, grinding belt width: 2,000 mm, Calibrating and sanding machine, width: 2000 mm, equipped with: Ljdpfx Afjzk S Ncewshk 1 belt with steel roller for calibrating 1 belt with CSD pad for finishing sanding 1 belt with CSD pad for finishing sanding

Condition: used, Year of construction: 1976, Second-hand machine Year of manufacture: 1976 Lhedpfxozk Nyre Afwsk Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display - Push-button control with contactor control - Sanding width 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 1 automatic belt sander with combination unit with electronic articulated pressure beam For sanding soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Grinding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal With patented CSD articulated pressure beam for compensating for workpiece tolerances of up to 2 mm Grinding width 1350 mm Grinding belt length: 2150 mm Grinding belt speed, frequency-controlled: approx. 2–18 m/sec Grinding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Lhjdpfx Aezk Nxzofwek with belt discharge 490 l/min Extraction connection: 180 mm Air requirement for grinding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power requirement approx. 17 kW Weight approx. 2,500 kg Dimensions WxDxH 2090x1670x2020 mm The machine is yet to be fitted with a new pre-lift belt Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 Condition: fully inspected and serviced, Includes new feed belt Features and technical specifications: - Includes combination unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with an air-cushion pressure shoe controlled by the workpiece Lhedpfxszk Npmj Afwek - 4-way adjustable grit compensation - with pneumatic belt tensioning device - fitted with a rotating cleaning brush on the outlet side of the machine - Belt oscillation controlled by a photoelectric sensor for automatic monitoring and control of the lateral belt position to ensure even belt wear - with roller table at the inlet - with digital display for the electrically driven workpiece thickness adjustment - with additional veneer sanding beam - Includes 2 spare grinding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Clearance height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable from 2.5 to 12.5 m/min - Extraction connections: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2,300 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 1,300 mm, TECHNICAL DETAILS Lsdpfezktntsx Afwohk Working width: 1,300 mm EQUIPMENT Vacuum conveyor belt Satinizing roller Brush roller EA dust extraction machine with high-pressure blowing system and rotating nozzles Ionization for statically charged dust Cross-grinding unit with belt blowing device Longitudinal grinding unit, infinitely adjustable speed, with belt blowing device Calibrating roller can be activated via the control panel

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad Working width 1350mm Pressure rollers for short elements. Air-blow on both units. Total weight 3050kg Condition very good. Available immediately. Ljdpfx Aozkmdhefwohk