Heinrich Bulthaup GmbH

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 800 mm, cutting width (max.): 900 mm, This sawmill includes: 2 x clamping devices 4 x vertical stops 4 x leveling devices with clamps 3 x log lifting arms 1 x pre-cutter 1 x log roll with drive 1 x saw blade lubrication system 1 x water lubrication system 1 x electric positioning control Basic cutting length: 7.1 m Log passage width: approx. 90 cm Gedpfxjzk Exdo Al Aoud Hydraulic pump: 17 liters Motor power: 18 kW Saw blade width: 100 mm

Condition: used, Wood sawmill 1/26 Gsdpfezkh N Sox Al Aeud

Condition: used, Wood sawmill 2/26 Guedpfxjzkh N Es Al Aed

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Gjdpfx Aljzht Hws Aoud

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Gjdpfx Alezf Nbxe Aeud

Condition: used, Meassuring frame for logs and timber type Rema 9001 Maximum meassuring field 700 mm Gusdozd Azvepfx Al Ajd

Condition: excellent (used), For sale: FINSCAN moisture meter scan moisture meter, measures dried lumber. Godpfezdq Nnjx Al Ajud (these pictures are just as reference, the Finscan for sale is exact same) Available for delivery July 2026 Located in Finland.

Condition: excellent (used), functionality: fully functional, Robust EWD reduction gearbox for gate drive. Gusdpszdiq Sjfx Al Aod Shaft 100 mm. Pulleys 900 x 280 and 560 x 450 mm. Pulleys attached to the shaft with tensioning elements. Used for 2 years. Suitable for all EWD / Esterer gates.

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Godpfx Aleyw Sv Ej Aeud

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Gedpfxsywh Hme Al Ajud

Year of construction: 2015, condition: used, functionality: fully functional, A used electric 4-step feed unit manufactured by Ingenjörsfirma Gösta Hedlund AB in very good condition. Gusdeyiaafopfx Al Aed

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Machine width: 4.30 m Gujdpfx Asyh U I Iol Aod Machine length: 7.50 m The entire system corresponds to the foto

Condition: used, Chip screen Gusdpfx Aleyhn Dxo Ajd Year of manufacture: 1996 Manufacturer: Konewood/Andritz Model: CS600 Screen capacity: 400-675 m3/h Weight around: 10 tons

Condition: new, 2 new, two-part gang saw bottom rollers, 250 mm diameter, bore 105 mm, 685 mm long Godpsyctwtjfx Al Aeud

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Gsdox U Tfpopfx Al Asud

Condition: ready for operation (used), Metaldetector with electric -operating cabinet, inner diam. 1000 mm Guodpfx Aljx Agtto Aed

Condition: excellent (used), Year of construction: 2013, Chipper for producing cellulose or fuel chips manufactured by Heinola Finland. Drum diameter 900 mm Inlet width 700 mm Capacity up to 110 m3 per hour with max motor power Suitable motor powers: 70 to 160 kW Gusdpfx Aoxxql Esl Asd

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Guedpfoxw Uf Tex Al Ajd

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Gusdpfx Aloxw Ubno Aod

Condition: used, Gatter Saw Sharpening Machine Vollmer CNHV Year of manufacture: 1978 Gatter saw blade width: 60-160 mm Toothing length: max. 1450 mm Tooth pitch: 14 – 40 mm Tooth height: max. 25 mm Rake angle: 0° - 30° Blade thickness: 0 – 6 mm Grinding wheel: diameter 200 mm Godsxvz R Hspfx Al Aoud Working speed: 30, 50, 75 teeth per minute Tooth forms: 3 pcs Connected load: 2.1 kW Weight: 500 kg Including gatter saw set device Lorroch SGB 6 (similar to Meinert PH6D) year 1983

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Godpsxvpqbefx Al Asud

Year of construction: 2021, condition: excellent (used), Scanner Finnos X-ray Gjdpfx Asxmk I Ael Ajud Manufacturer: Finnos Year of purchase - 2021 3D, laser and X-ray technology Including Jack-Steel measuring conveyor (2021) EROP ergonomic solution for sorters(sorting chair etc.) was in operation for less than 2 years

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Guodpfx Asxl Aauel Aod

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Gsdpfx Aow Eu Akjl Asud 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, For sale here are 4 log lifters, which are hydraulically driven. Godsw Dubwepfx Al Aoud