RS Machinery

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Dkodeyzy S Aepfx Ag Rok Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMPACT, The COMPACT model plasma cutting machine is a machine model that protects your budget through lower investment and reduced costs, prioritizing reliability, user-friendliness, and compactness as its three main principles. The Compact is a valid solution for the needs of a wide market segment, offering an excellent cost/benefit ratio for anyone dedicated to sheet metal processing. COMPACT is characterized by a monoblock design with a compact layout, making it easy to transport and suitable for medium and small workshops. This system is ideal for high-capacity plasma power sources. The system comes equipped with an extraction filter and plasma power source, and it can be configured with various CNC and software options depending on customer requirements. The Compact can feature a working range between 1,500mm x 3,000mm and 2,000mm x 6,000mm. Dkodpfx Ageyzm S As Rok

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Djdpoyzhl Dofx Ag Rekk

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,830 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details. Dkjdoyzg D Sopfx Ag Rek • Condition: Very good, fully functional • Working hours: 3830 h • Machine under power: Yes • Cutting system: CNC plasma / oxy cutting • Plasma generator: PP130A (included) • Max cutting thickness: up to 30 mm • Machine parameters: • Installed power: 4 kW • Power supply: 400 V / 3 PH / 50 Hz • Input current: 6 A • Plasma generator parameters (PP130A): • Max power consumption: 26 kW • Power supply: 400 V / 3 PH / 50 Hz • Max input current: 40 A • Weight: 520 kg • Documentation included: user manual, operation manual, technical documentation

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. Dodpfjyy Rn Ssx Ag Rokk ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity Dkodpfx Agjyx Svbe Rjk • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, working range: 3,000 mm, sheet thickness (max.): 40 mm, The information was found successfully. Here is the updated listing with added cutting parameters: Teknohaus Thermcut 3000D – CNC Plasma Cutting Machine For sale: a well-maintained Finnish-made CNC plasma cutting machine. The machine has been used in production and operates flawlessly. Dksdpfx Aeywlh Ueg Rok Technical specifications: Manufacturer: Suomen Teknohaus Oy Model: Thermcut 3000D Year of manufacture: 2007 Serial number: 320011 Supply voltage: 3 × 400 V Plasma source: Hypertherm HyPerformance HPR130 (130 A) Controller: Thermcut / Teknohaus CNC controller with touchscreen USB interface for program transfer Cutting capacity (mild steel): - High-quality, virtually dross-free cut: 16 mm - Production piercing: 25 mm - Maximum cutting thickness (edge start): 38 mm Features: - Large cutting table (approx. 3000 mm wide) - Two plasma channels (Plasma 1 & Plasma 2) - Water table for spark and fume management - Ideal for cutting steel, stainless steel, and aluminium Machine viewings available by appointment; the machine can be seen in full working order. 📞 For further information, please call.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 1,500 kg, input voltage: 380 V, We hereby offer for sale a used plasma cutting machine Model: UP-1530 Brand: Plasmabron Huayuan 200 Amp, with Hypertherm torch The Z-axis is equipped with height control Cutting thickness up to a maximum of 30 mm steel. (Equivalent to Max Pro 200) Control: Starfire F2300 Controller. Guidance: HIWIN linear guideways. The machine has been dismantled and is in working condition. Dkedpfxsyv H Ero Ag Rsk

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 3,500 mm, working length: 8,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working length: 8,000 mm Working width: 3,500 mm Dedpfoyv Awksx Ag Rekk MACHINE DETAILS Power: 300 A Plasma source: Nertajet EQUIPMENT 1 torch head 1 plasma head 1 oxy-fuel head

Condition: ready for operation (used), Year of construction: 2001, operating hours: 1,907 h, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 290 mm, number of axes: 3, This 3-axis SAF Plasmatone 25Hp was manufactured in 2001. It features an 8000 x 2500 mm cutting table with a maximum X-axis travel of 3400 mm and Y-axis travel of 1700 mm. The machine is retrofitted with a Hypertherm Max Pro-200 power source, allowing for versatile cutting of various materials. If you are looking to get high-quality plasma cutting capabilities, consider the SAF Plasmatone 25Hp machine we have for sale. Contact us for further details. • Cutting table: 8000 x 2500 mm • Retrofitted power source: Hypertherm Max Pro-200 (year 2013), long-life plasma (air and oxygen) • Cutting capability: • Mild steel (air/air): 0.5–30 mm full cut, up to 50 mm with edge start • Stainless steel (air/air): 0.5–30 mm full cut, up to 50 mm with edge start • Aluminum (air/air): 0.5–30 mm full cut, up to 40 mm with edge start • Oxygen can be used depending on required cut quality • Cutting current settings: 50 A / 130 A / 200 A (consumables changeable at the torch) • CNC control: new-generation control with Mach3 software Dsdpfsyvg A Dsx Ag Rjkk Additional equipment • SAF fume extraction system with 11 kW motor and 12-filter unit • Automatic extraction air dampers on the frame (electric sensors + pneumatic cylinders) • New cutting head and a set of consumables included

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 35 mm, track width: 2,000 mm, table length: 6,000 mm, cutting current: 260 A, We offer for sale a used, reliable, fully functional Messer Multitherm eco 3100 plasma cutting machine, year of manufacture: 2013. Manufacturer: Messer Model: Messer Multitherm eco 3100 Dedpjyvgdyofx Ag Rjkk Year of manufacture: 2013 Condition: ready for use Machine type: plasma cutting machine Available for pickup: 08/2026 Description: Power source: 260 A Table size: 2 x 12 m Cutting up to 35 mm sheet thickness Software: Omniwin 2025 Regularly serviced Pre-prepared for oxy-fuel cutting Test run possible upon agreement If you have any questions or need more information, feel free to write us a message or call us.

Condition: good (used), MicroStep SPL-PA Plasma Cutting System with Extraction and Compressor Technology Manufacturer: MicroStep Group Dsdpfx Ageyvd Uis Rokk Model: SPL-PA 4501.15+S50 Machine type: CNC plasma cutting system CNC control: iMSNC Design: gantry construction with linear guides Extraction unit: Donaldson Torit DCE Electrical connection (extraction unit): 400 Volt Motor power (extraction unit): 7.5 kW Compressed air generation: screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE certification: available Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 4, This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details. • Working area: 3000 mm (length) x 1500 mm (width) • Machine structure: Heavy steel frame construction; portal gantry design • Material support: Sectional support bed • Plasma cutting unit: Kjellberg HiFocus 280i • Max plasma thickness: up to approx. 70 mm • Cutting capacity (steel): 6 / 12 / 20 / 25 / 30 / 40 / 50 / 70 mm • Cutting speed range: approx. 0–5200 mm/min • Positioning speed: approx. 12,000 mm/min • Positioning accuracy: ±0.1 mm • Control system: VACAM CNC control • Software: VACAM Machine Edition; VACAD; VANEST • Industrial PC: Intel Core 2 Duo; 2 GB RAM; SSD storage; Ethernet connection; touchscreen monitor; keyboard; USB ports • Automatic torch height control: HT4000 PCS • Laser pointer: Yes • Electrical connection: 230 V, 1 phase, 50 Hz • Compressed air requirement: Operating pressure approx. 6 bar • Noise level (idle): approx. 70 dB • Safety equipment: Emergency stop buttons; emergency stop cable; protective safety systems • Material types: Steel; structural steel; sheet metal Additional equipment Dedpfx Agjyu Th Aj Rokk • TEKA Filtercube 4H extraction unit (filter system)

Condition: good (used), Year of construction: 2016, Gebruikte plasmasnijmachines van Soitaab (Italië) Model: Plasmatech 3015 Tafelafmetingen: 3000 x 1500 mm Hypertherm HPR 130 XD plasmabron Markeerstift Dsdpfx Agsyu Splo Rskk Torit afzuigsysteem Bouwjaar: 2016

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, working range: 9,000 mm, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, input voltage: 400 V, total width: 3,500 mm, cutting current: 154 A, input frequency: 50 Hz, We are offering this used MicroStep 9001.35P plasma cutting machine, year 2020. Type: MasterCut Model: 9001.35P Dkedpfxjyu Hkwo Ag Rjk Serial No.: 2815 Year of Manufacture: 2020 Rated Current: 154 A Short-Circuit Current: 6 kA Weight: 1,100 kg IP Protection: 43/20 Power Supply: 3L+N+PE AC 400/230V, 50Hz If you have any further questions or require more information, please send us a message or give us a call.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: EN 60204-1, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, cutting height (max.): 20 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, warranty duration: 12 months, working length: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: electric, We are offering this well-maintained Hugong INTECUT-HT plasma cutting machine / CNC portal cutting system KAI-TEC Smart, including marking function, year of manufacture 2025, as we are upgrading to a larger system. The machine was only purchased for a single project and has been in operation since August 2025. The manufacturer’s warranty is valid until August 2026. The system is fully functional, in excellent technical condition, and shows no signs of excessive wear. Only normal signs of use are present. It has become too small for our requirements, but it is ideally suited for smaller metal workshops, metal construction companies, or fabrication shops. Technical data & features: - CNC portal cutting system KAI-TEC Smart - Cutting area: approx. 1,500 × 3,000 mm - CNC control with cutting database - NEOCUT 105 plasma system with marking function - Plasma cutting range: 1–20 mm mild steel (stainless steel & aluminium max. 10 mm) - Machine torch including hose package - Automatic torch height control - Laser pointer - FastCam7 nesting software - DXF / DWG import - Auto-nesting function - Remnant sheet nesting - Cut cost calculation Accessories: ✅ Spare and consumable parts included (e.g. nozzles, electrodes and other accessories – ready for immediate use) Other: - Sale due to new installation - Viewing and test run possible by arrangement - Collection by buyer Dsdpfx Agsyux Hqo Rjkk - Price plus VAT Legal notice: The sale is made with exclusion of liability for material defects. No warranty, no guarantee, no returns. If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Dkedpfxoyug Eno Ag Rsk

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Djdpfsytqmmsx Ag Rekk Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filtration unit, outdoor installation 1 x nesting software integrated in machine control Availability: immediate

Condition: used, MicroStep MG 18001.30 PraG Dimensions: 18,000 x 3,000 mm 1x plasma rotator: renewed in 2022 1x straight oxy-fuel torch Hypertherm HPR 260XD plasma source Excluding filter unit Djdpfxeytga Ne Ag Rskk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC Plasma Cutting Machine NESSAP Klima Classic 1600 x 6000 with Kjellberg HiFocus 100 High-performance CNC plasma cutting machine in very good condition. Manufacturer: NESSAP Dksdpfx Agsyr Sk Do Rek Model: Klima Classic Working area: 1600 x 6000 mm Year of manufacture: 2010 Plasma source: Kjellberg HiFocus 100 (high-precision industrial plasma system) Cutting capacity: Steel: 0.5 – 30 mm Stainless steel: up to 25 mm Aluminum: up to 25 mm Equipment: • CNC control system NESSAP • Plasma source Kjellberg HiFocus 100 • Plasma extraction system TIGEMA • Large cutting table 1600 x 6000 mm • Industrial plasma cutting unit with high-precision cutting quality Condition: The machine is in very good technical condition. In recent years, it has been used only occasionally, as production was shifted to laser cutting technology. The machine remains connected and can be inspected and tested under power.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20 40 27.07 / 207 - 090, type of input current: three-phase, Plasma cutting machine OMNICUT 4000 Control unit MS 100 Air extraction system Specifications: Rail length: 15 m Table length: 12.5 m Rail span: 4 m Table width: 2.6 m Plasma cutting unit HPR 130 Cutting thicknesses: Steel: 0.5 mm – 25 mm Stainless steel: 1 mm – 20 mm Aluminium: 1 mm – 20 mm Dksdpfxeyr Iguo Ag Rjk Oxy-fuel cutting unit MSX 750, PCS 2100 Steel: 3 mm – 300 mm The machine has seen little use and is offered in full working condition, ready for operation.

Condition: ready for operation (used), Year of construction: 2012, total width: 4,650 mm, total height: 1,660 mm, product length (max.): 15,000 mm, table load: 1,000 kg, number of axes: 3, This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details. • Table size: 2,500 x 13,000 mm • Cutting area: 2,700 x 12,950 mm • Table height: 700 mm • Max material thickness: 125 mm • Plasma generator: ESAB Precision Plasma M3 Gen 2, 360 A • Plasma torch: PT 36 • Gas torch: Cool Jet (1 unit) • Control system: CNC Vision 51 • Power supply: Machine 1 x 230 V 50 Hz; Plasma 3 x 400 V 50 Hz • Operating hours: • Plasma torch: 2,795 h • Gas torch: 1,979 h • Gantry and drive: • High-performance cutting gantry • Linear control, AC motor drives, double-sided rack and pinion • Positioning speed max. 24,000 mm/min • Continuous gantry position monitoring Dkjdpfxeyrf Szo Ag Rjk • Plasma and gas cutting: • Plasma gases: Technical air, N₂, O₂, H35 • Max piercing: 40 mm (CS/SS/Al) • Cutting speed (CS): 12 mm – 4,200 mm/min; 25 mm – 2,000 mm/min; 38 mm – 1,000 mm/min • Automatic piercing, capacitive height control • HF start system • Cutting quality: ISO 9013 Class 3 • Protection and environment: • Dust protection: IP54 • Relative humidity: 10–85% (no condensation) • Dimensions and installation: • Cutting table: 17-section Additional equipment • Filter unit: ECO 16 CT (extraction/filtration)

Condition: used, Year of construction: 1997, open-circuit voltage 280 - 320 VDC current intensivity 30 - 80 A output voltage 140 VDC cutting medium Air / Nitrogen total power requirement ca. 11,2 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,90 x 0,35 x 0,50 m Dodpoym D Anjfx Ag Rokk Plasma Cutting Machine HYPERTHERM - Hypertherm Powermax 1100 ERTHERM RT 80 hand torch - Recommended cutting capacity: 22 mm - Maximum cutting capacity: 29 mm - Severing capacity: 38 mm - Gas: Air or nitrogen - Gas inlet pressure: 6.1 bar - Gas flow rate: 189 l/min

Condition: used, Year of construction: 2021, UltraSharp plasma cutting machine. The machine is fitted with the Burny cnc control ,fitted with a Lincoln Electric 170 amp high definition plasma cutting system including Inova automatic torch height control and UltraSharp cutting technology. Djdsyli Hispfx Ag Rekk It would be capable of a cutting area of 4,000mm x 2,000mm fitted with a sectional fume extraction table.

Condition: used, Year of construction: 2022, RUR2500P UltraSharp plasma cutting machine, complete with a Burny 10 icd plus CNC control and a Lincoln Electric Fineline 170 amp plasma cutting system including a nova automatic torch height control, 8m x 2m extraction table with a 8m x 2m cut tume extraction system Dkedpfxoylizyj Ag Rjk