UAB "3D prototipai"

Year of construction: 2017, condition: used, A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 5) Hege drying booth, year of manufacture: 2017, ventilation: recirculation mode, heating: pumped hot water, booth dimensions X/Y/Z: approx. 5840mm/4120mm/3000mm. 6) Hege lift/lower station, year of manufacture: 2017, lifting capacity: 980kg, payload: 998kg, lift: approx. 2500mm, lifting speed: approx. 17.4m/min, version for asymmetrical load distribution: 70%/30%. 7) Hand-pushed monorail conveyor, year of manufacture: 2008, extension: 2017, operating mode: manual, load capacity: 400kg/m, max. trolley load: 200kg, max. load bar capacity: 400kg, max. load between the support brackets: 500kg, max. system temperature: 80°C, max. temperature in the area of the lift/lower station: 40°C. Documentation available. An on-site inspection is possible. Pgsdpfjzwfqtsx Ag Aer

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Pgodpfx Aszv T I Dsg Aer

Year of construction: 2017, condition: used, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 Pgjdezv Tcuopfx Ag Aor - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Year of construction: 2013, condition: used, cleaning unit Eko-Pil PMPO 100T Year of manufacture: 2013 Pgodpfx Aozvzd Heg Asr

Year of construction: 2009, operating hours: 89,479 h, condition: good (used), functionality: fully functional, Grinding robot for machining forged or cast water fittings, operating air pressure 5.5-6 bar, operating voltage 400 V-50 Hz, rated current 13 A, Pgjdpfjzvn Tzox Ag Asr rated power 8 kW, ongoing maintenance until 2026, extensive range of accessories.

Condition: good (used), Small sandblasting unit Psdpfx Agszvng Ue Aogr Internal dimensions: 1.2 x 1.2 x 0.6 m (L x W x H) Operating pressure: 8 bar Equipped with extraction system, loading table, and spare parts (see photos) Transport and loading can be organized across Europe for an additional fee upon request. Prices quoted are exclusive of VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For more information or contact options, please reach us via the contact form.

Year of construction: 1987, condition: used, One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible. Pgjdpfx Aozuzy Ejg Asr

Condition: new, BRAND NEW HYDRAULIC SURFACE GRINDING MACHINE WITH INDUCTION MAIN MOTOR Pgsdpfjzupq Eox Ag Ajr "Your Next Reliable Production Machine Starts Here"

Condition: used, Year of construction: 2014, COMI 1092 Door liner thermoforming machine, Thermoformer HEDL 2000x800x200, Year of Manufacture 2014, Serial Number C1092 Machine Specifications (List View) Forming & Mould Dimensions Maximum inside frame dimensions: 2004 × 804 mm Maximum moulded part height: 150 mm (male mould) / 50 mm (female mould) Maximum mould base dimensions: 2000 × 800 mm Minimum mould base dimensions: 600 × 500 mm Coil width range (min/max): 580 to 900 mm Mechanical Characteristics Lower die holder force: 40,000 kg Machine weight: 20,000 kg (20 tonnes) Machine dimensions: See Drawing LO-029-14-01 Heating System Upper heating power: 168 kW Thermoregulator power: 24.99 kW (3 × 8.33 kW) Motors & Drives Forming motor power: 12 kW Vacuum pump motor power: 7.8 kW De-reel device motor power: 0.37 kW Sheet conveyor motor power: 8.17 kW Transport regulation motor power: 1.1 kW Fan motor power: 3.0 kW (4 × 0.75 kW) Transfer unloading motor power: 3.0 kW (2 × 1.5 kW) Scrap cutting motor power: 2.2 kW Moulded-part unloading belts motor power: 0.5 kW Cooling & Auxiliary Equipment Chiller power: 28.75 kW Auxiliary equipment maximum power: 4.12 kW Electrical Requirements Maximum installed power: 264 kW Podpfx Agjzumwce Aegr Typical operating power (50% load): 132 kW Pneumatic Requirements Pneumatic operating pressure: 6 bar Air consumption: 2,000 N litres/cycle Water Requirements Water temperature: 25 °C Water pressure: 2 to 3 bar . Fully automatic thermoforming machine designed to shape plastic sheets up to 2000 × 800 mm with a maximum forming depth of 150 mm (200 mm), suitable for high-capacity industrial applications. Thermoformer details: Forming area 2000 × 800 mm Max forming depth 150 (200) mm Heating station – ONLY Upper heater, heater length fully configurable, fulfils pre-heating and heating functions. Pressure and vacuum forming operation. Trimming press. Scrap collection end station. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Pedpfx Aezumuujg Aegr Maximum sheet stack height: 1000 mm Maximum sheet support stack height: 180 mm Heating System Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Condition: used, Year of construction: 2007, used to produce innerliners Equipment Specifications Summary Forming and Tool Dimensions Maximum frame inner size: 2005 × 905 mm Maximum tool base size: 2000 × 900 mm Minimum tool base size: 700 × 500 mm Maximum sheet size: 2090 × 960 mm Minimum sheet size: 790 × 560 mm Maximum tool height: 800 mm (550 + 250 mm) Maximum formed workpiece height: 550 mm Maximum sheet stack height: 1000 mm Maximum pallet height: 180 mm Heating System Upper heating power: 83.3 kW Pedpfjzumt Dox Ag Asgr Lower heating power: 71.3 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Drive Motors & Auxiliary Equipment Oil pump motor power: 19 kW Vacuum pump motor power: 23.4 kW Sheet centering motors power: 0.24 kW Sheet feed motor power: 2.2 kW Sheet feed width-adjustment motor power: 2.2 kW Sheet picker motor power: 0.37 kW Fan motor power: 5.5 kW Shear motor power: 2.2 kW Carriage motor power: 2.2 kW Rotary table motor power: 1.1 kW Scrap cutter motor power: 3.0 kW Scrap conveyor motor power: 0.37 kW Finished workpiece discharge belt motor power: 0.75 kW Cross-cutting motor power: 0.25 kW Cross-cut scrap conveyor motor power: 0.22 kW Transfer unit motor power: 1.5 kW Auxiliary units maximum consumption: 5.1 kW Tempering unit power: 52 kW Electrical Requirements Maximum installed power: 375 kW Power consumption at 70% load: 262.5 kW Vacuum System Vacuum pumps capacity: 750 m³/h (250 × 3) Tool vacuum tank capacity: 2,000 L Bell vacuum tank capacity: 2,000 L Hydraulic System Required oil quantity: 600 L Hydraulic operating pressure: 10 MPa Maximum hydraulic operating pressure: 18 MPa Pneumatic System Required air pressure: 600 kPa Compressed air consumption: 1,300 N liters/cycle Cooling Water Requirements Incoming water pressure: 200-300 kPa Incoming water temperature: 12-20 °C Outgoing water temperature: 30-35 °C Mechanical Characteristics Lower tool holder force: 9,000 kg Machine weight: 35,000 kg (35 tonnes) Key Utility Requirements Electrical Supply: 375 kW installed load Compressed Air: 600 kPa, 1,300 N liters/cycle Cooling Water: 200-300 kPa at 12-20 °C Hydraulic Oil Capacity: 600 liters Vacuum Capacity: 750 m³/h with two 2,000-liter vacuum tanks Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. Thermoformer details: Forming area 2005mm x 905mm Max forming depth 550mm 3x loading stations. 1 x heating station. (pre-heating, final heating, upper and lower elements) - ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. Year of manufacture 2007.

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Pedszumrmjpfx Ag Aegr Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Pgodpfxezumnze Ag Aor Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Graf Wet Blasting System Machine type: Wet blasting system Manufacturer: Graf Technik GmbH Type: Compact 2 Plus Podpfxoztyzlj Ag Asgr Year of manufacture: 2013 Control system: Siemens Origin: Germany Location: Albstadt Delivery time: upon agreement

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 250 mm, filter area: 80 m², noise level: 85 dB, actuation type: electric, total height: 3,000 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Equipment: CE marking, Used filter, model PC 8 TV, in excellent condition, like new. Year of manufacture: 2018 The electrical control cabinet for the filter is included. Upon purchase, the filter will be supplied with 8 new filter cartridges. Technical data of the PC 8 TV filter: No of cartridges: 8 pcs Filtering surface cartridge m²: 10 Filtering surface collector m²: 80 Total capacity m³/h: 6.000 Size of the cartridge mm: Ø325-600 No. of valves pcs: 8 El. motor power kW: 5,50 Static pressure Pa: 1.800 Air consumption max. m³/h : ~40,00 Dimension of filter A (length) mm: 1.700 Dimension of filter B (width) mm: 930 Dimension of filter C (height with silencer) mm: 2.950 Pgsdpeztqctjfx Ag Aer Inlet flange Ø mm: 2x250 We reserve the right to errors in the data provided. We accept no liability for any errors or inaccuracies in the description or technical specifications.

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm -Motor power: 4.5 kW Pedpszta U Ssfx Ag Ajgr -Drive power: 1.5 hp -Material: SM steel Dimensions: L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted.

Year of construction: 2018, condition: used, machine/vehicle number: P18.0003, Rated power: 14.5 kW, speed range: 20-18,000 rpm, tool holder HKS-A63, 30-position tool changer, oscillating machining, controlled NC swivel milling head, machine weight: 2,200 kg, 1 steel drawer cabinet (gray), dimensions (W x H x D): approx. 80 x 120 x 80 cm, 8 drawers, filled with various accessories, 1 workbench, 1 with a sub-mounted steel drawer cabinet on the left, approx. 200 x 70 cm, 6 drawers, with contents. Psdpszqzadefx Ag Aogr

Year of construction: 2019, operating hours: 4,458 h, condition: used, machine/vehicle number: 168030-1903774836, Work area: 1,219 x 914 mm, with dust extraction system TBH LN 265, serial no.: 212492, 2 PCs, keyboard and mouse. Pjdpfx Aszqza Deg Asgr

Condition: new, Year of construction: 2026, DT2200M Downdraft Grinding Table The DT2200M is a professional downdraft grinding table designed to provide a safe and efficient workspace for metal grinding applications. Equipped with a high-performance filtration system and dual extraction fans, it is ideally suited for demanding industrial and workshop environments, effectively reducing airborne dust while improving operator safety and comfort. Key Features Dual-stage filtration system efficiently removes grinding dust and airborne contaminants High extraction capacity – two centrifugal fans rated at 4,000 m³/h each provide continuous operation with reduced filter replacement frequency Large working surface – the 2060 × 530 mm worktable accommodates larger workpieces with ease Heavy-duty construction – robust steel housing with spacious metal waste drawers on both sides of the table Construction and Technology Podpfx Aszqy Ruog Aegr The DT2200M features an 11-section work surface, providing flexibility for securing and processing various workpieces. An integrated downdraft and side-draft extraction system captures dust directly at the source, significantly improving air quality within the workspace. The high-temperature-resistant filter cartridges are designed for extended service life in applications involving elevated heat generation. Please note that the filters are heat-resistant but not fire-resistant. Precision and Performance Thanks to its high static pressure and two centrifugal extraction fans, the DT2200M achieves a filtration efficiency of over 99.9%. Independent filtration units and a quick filter replacement system reduce maintenance time while ensuring consistently high extraction performance. Applications The DT2200M is suitable for use in: Metal fabrication workshops Industrial paint shops Maintenance and repair departments Manufacturing facilities specializing in metalworking Standard Equipment Two centrifugal extraction fans Four filter cartridges (395 × 495 × 24 mm) 11-section work surface Metal waste collection drawers on both sides Integrated workpiece clamping fixtures Technical Specifications Specification Value Work Surface Dimensions 2060 × 530 mm Motor Power 2 × 1.0 kW Airflow Capacity 2 × 4,000 m³/h Filter Size 4 × (395 × 495 × 24 mm) Power Supply 230 V Weight 130 kg Overall Dimensions 2200 × 600 × 850 mm

Year of construction: 2021, condition: ready for operation (used), A nearly new Wheelabrator overhead monorail shot blasting machine is available. Rail overhang: 2338mm, rail width: 2980mm, working height: 880mm, work chamber height: 1600mm, max. workpiece diameter: 1200mm, max. workpiece weight: 400kg, exhaust air volume flow: 2500m³/h, exhaust air flange adjustment min./max.: -90°/90°, surface roughness range: 0.1µm-12.5µm, connected load: 22kW, component tolerances: ISO 2768-mK, welded construction tolerance: ISO 13920-AE. Machine dimensions X/Y/Z: approx. 4250mm/3250mm/4850mm, weight: approx. 5750kg, shot blasting hours: 58h, operating hours: 190h. Documentation available. An on-site inspection is possible. Psdpfx Agozqfxqo Aogr

Year of construction: 2012, condition: ready for operation (used), A repair-required OTI shot blasting machine is offered. 1) OTI GG A2-2500 blasting system, working length: 6000mm. 2) OTI blasting cabinet, cabinet dimensions X/Y/Z: 1650mm/13500mm/3800mm, internally illuminated, with automatically guided blast nozzles and rubber curtains for cabinet protection. 3) Chain conveyor unit, continuously variable motor-driven, with chain guide, roller conveyor, tension frame bearing and chain tensioner. 4) Oscillation, continuously variable motor-driven. 5) Blast media filling station, pneumatically operated, filling hopper: approx. 150kg, with level probe and shut-off slide, max. filling weight: approx. 200kg. 6) Cyclone separator/pre-separator system for separating reusable and spent blast media, with blast media recirculation into the blasting process and Big-Bag collection. 7) Filter system with radial fans, 2x 8 filter cartridges, cartridge dimensions X/Y: 330mm/1000mm, filter area: 14m²/cartridge, extraction capacity: 10000m³/h, with compressed air cleaning. 8) Final filter with pleated filter elements, 2x 2 filter elements, filter element dimensions X/Y: 915mm/915mm, separation efficiency: 99.9%. 9) Control cabinet with controller: Moeller Easy 820/618. 10) Operator panel with beacon/signal light, display, start pushbutton, key switch, emergency stop pushbutton and pressure gauges for operating pressure and inlet pressure. 11) Pressure vessel Maschinen- und Behälterbau GmbH, type MB 030603-1.1000, year of manufacture: 2012, volume: 1000l, permissible pressure: 11bar, min./max. permissible temperature: -10°C/50°C. Documentation available. An on-site inspection is possible. Pjdpfxszp Rg Rj Ag Aogr

Year of construction: 2022, condition: used, functionality: fully functional, Machine transition, like new. Podpezp Hk Ejfx Ag Aogr

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Pgedpfx Ajzpxwdog Aor Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Spray pressure 1 – 1,5 bar Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 4 is a final fine osmosis rinse direct from the osmosis plant. The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2026, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm Pedpfxozpwmds Ag Aegr - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis Pgodpfx Aezpwlmsg Ajr - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials