Yasa Poland Sp. z o.o.

Year of construction: 2011, condition: excellent (used), Manual chamfering machine for round tubes and bars 4-spindle deburring and chamfering machine For internal and external deburring/chamfering Spindle speeds: 70/140 rpm Materials: steel, stainless steel, aluminium, non-ferrous metals Diameter: Ø 2 – 75 mm Min. workpiece length: from 100 mm Deburring time: 3–4 sec. / end face The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition Predpfjzwpwqjx Alcoa

Year of construction: 2000, condition: ready for operation (used), A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible. Prjdpfxezrn Nuj Alcja

Year of construction: 2006, condition: ready for operation (used), A Bütfering metal deburring machine is offered for sale. Maximum working width: 1350mm, feed speed: 20m/min, processing stages: 3, 1st processing stage: abrasive belt, 2nd processing stage: 2 rows of cup brushes, 3rd processing stage: polishing belt, minimum and maximum workpiece thickness: 0.5mm/100mm, maximum material thickness: 100mm. Including one damaged conveyor belt and abrasive belts. Machine dimensions: 2000mm/2050mm/3400mm, weight: approx. 6000kg. Inspection possible by appointment. Prsdjzl U I Dspfx Alcoa

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. Psdpszlubdofx Alcjra It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Year of construction: 2018, condition: ready for operation (used), An automatic gKteso post-processing and deburring center is available. Technology: 6D, axes: 5+1, working dimensions X/Y/Z: 500mm/500mm/300mm, max. travel speed: 1m/s, repeatability: 0.05mm, path accuracy: 0.1mm, max. flatness: 0.02mm, chucks: 2-jaw/3-jaw/4-jaw chucks, machine dimensions X/Y/Z: approx. 2400mm/1800mm/2900mm, operating hours: approx. 12541h. Including pneumatic chucks, safety light curtain, exchange table and 6D technology. Documentation available. An on-site inspection is possible. Prodpfx Alszlt N Tjcsa

Year of construction: 2026, condition: ready for operation (used), A brand new Spontan brush deburring machine, which was used only as a demonstration machine, for tubes and profiles is available. Product length range: 100mm-2000mm, Product diameter range: 8mm-90mm, Brush diameter: 300mm, Wall thickness range: 0.5mm-6mm, Max. workpiece weight: 10kg/m, Min. product length: 2×diameter, Brush wire diameter range: 0.2mm-0.5mm, Brush length: 450mm, Discharge height: 1300mm, Machine dimensions X/Y/Z: approx. 3500mm/1750mm/1700mm. Documentation available. An on-site inspection is possible. Prsdszkvkwjpfx Alcsa

Condition: good (used), RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and post-treatment line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to a maximum of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable welded stainless steel construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residues, or vapors from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles using an industrial continuous-feed process. The number "2000" indicates the maximum workpiece length of 2,000 mm that can be processed automatically in the standard configuration. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request! Prjdpjzklb Eefx Alcsa

Year of construction: 2006, condition: used, functionality: fully functional, SCANTONATRICE AD ANGOLO REGOLABILE 250x4, FCT SC-250, USATA 'CE'. Pjdezh E H Aopfx Alcjra

Condition: used, weight of the machine ca. 90 kg Prsdpfx Aljzhcihocsa

Condition: used, functionality: fully functional, ECM deburring machine VMB brand, formerly Kenametal Podpfx Ajzd Dwrolcora Currently not installed, but I will handle its relocation to the warehouse 2 units available

Condition: used, Year of construction: 2008, functionality: unexamined, Equipment: documentation/manual, ECM deburring machine including a double-chamber filter press and separate cooler. Available on short notice without warranty. Collection and transport must be arranged independently. Predpfxey U Dyqe Alcja

Year of construction: 2003, condition: used, contact roller 70 x 50 abrasive belt size 2000 x 12/50 power capacity 2,2 kW Overall size ca. 400 x 1100 x 1250 mm deburring machine / free belt frinding machine abrasive belt with widt from 12-50 mm with vertical working position Predpfxoy Ihabe Alcoa head inclination up to 45° both ways easy bending of the belt allows to follow the shape cutting speed 24m / sec big tabel surface with ball rolling with self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/h comes with a huge bunch of belts!

Year of construction: 2014, condition: ready for operation (used), A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible. Pedpfx Ajyxq Uislcora

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: ⚙️ Core Specifications Pjdpfxexx Nq Te Alcera Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Modular Design: Configurable for different layouts and productivity goals. Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Condition: new, Year of construction: 2025, functionality: fully functional, The DMS 2KR was developed specifically for deburring components after laser or saw cutting, based on Flex Trim flap wheel systems. Pjdpfx Aloxhdcpjcera The DMS 2KR machine features two independent units, each controlled by separate frequency inverters. A dedicated support base allows for very fast deburring of the ends of processed parts, such as tubes and profiles of various shapes. The installed columns enable quick and precise adjustment across multiple axes. Electronic speed and rotational direction control allow for optimal processing parameters to be set. The machine is entirely manufactured in Poland by our company, drawing on extensive experience in grinding processes. TECHNICAL SPECIFICATIONS: - Adjustable height - Power: 0.55 kW - Speed controlled by frequency inverter - Two motors - Disc heads - Dust extraction guards included - Base for easy operation - Weight: approx. 140 kg - Dimensions: 1200 x 750 x 1400 mm (W x L x H) ADVANTAGES OF THE DMS 2KR: - Easy installation - User-friendly operation - Delivers excellent, uniform grinding results

Condition: new, dimensions: innen 1160 x 870 x 850 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 150 kg total power requirement 1,2 kW weight 160 kg range L-W-H 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials Psdpfx Alsxabugecjra * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: new, working area L-W-H 1000 x 900 x 900 mm range L-W-H 1300 x 1750 x 2200 mm weight 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space - highly effective dedusting - efficient way of working Prjdexaatzepfx Alcea - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material * such as B. corundum, steel sand, glass grain, glass beads, ceramic beads

Condition: used, - Power consumption: 26 kVA 3P400V /N/PE/50HZ; protection 63A Psdpfx Alewpkc Ijcjra - Compressed air connection: min. 5 bar, max. 7 bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa, min. 20 m/s, follow-up time 15s The system has been cleaned, packed by the manufacturer, preserved, and stored. It is complete and ready for operation. The system can be inspected at any time by appointment.

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Prodjwfg Hujpfx Alcsa

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. Predpfx Asv Awrwolcja + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: new, Year of construction: 2025, pipe diameter (max.): 48 mm, power: 0.55 kW (0.75 HP), input voltage: 400 V, At Duralbend, we are manufacturing high-quality deburring machines designed to meet the needs of various industries. Deburring is a crucial process for removing sharp edges and imperfections from metal tubes, ensuring a clean, smooth finish. Our deburring machines, capable of handling tube diameters up to 48 mm and 60 mm, are perfect for industries like automotive, furniture, and construction. Predpfx Aevx D Ecelcsa

Year of construction: 2026, condition: new, working width 950 mm workpiece width - max. 1,0 - 50 mm sandingbelt width 970 mm sandingbelt length 1900 mm weight of the machine ca. 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. * Suitable for processing steel, stainless steel and aluminium. * The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. * The two rotor heads ensure an all-round uniform Prodjvfhm Dopfx Alcja Edge rounding and a directionless finish. * The intuitive operation via touch panel allows every employee get to grips with the machine quickly. * The SMD 1 models are installed and ready for operation in a short time. * The compact design saves valuable production space. * Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consisting of: - Grinding machine SMD 123 RE (kit): - SMD 123 RE conveyor belt cleaning - SMx xx3 - sanding belt +120 Cubitron II, W=970, L=1900 - SMD 1x3 set grinding flap roller 3-piece. P120 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Year of construction: 1989, condition: excellent (used), Stock number: 2939 Manufacturer: Held Year of manufacture: 1989 Machine number: 3356 Type / Model: E90 Stop surfaces: 800 x 50 mm Speed: 8,400 rpm Connection: 1.1 kW Accessories/equipment: Condition: good Podpfx Alou Un N Ejcera Weight: approx. 0.1 t Footprint: 550 x 500 mm Dimensions: 1,000 x 500 x 1,000 mm

Year of construction: 2003, condition: used, Technical details: workpiece length: 130 - 2000 mm diameter min.: Ø 10 mm diameter max.: Ø 60 mm control: Fagor 10/102 S dimension machine xH: 3,8 x 3,8 x 1,9 m dimensions electric cabinet LxWxH: 1,2 x 0,6 x 2,2 m machine weight ab.: 4 500 kg Milling and deburring machine CNC of pipe ends or round steel on both sides. - Material feed via conveyor belt, travel distance approx. 3 300 mm. - Brush unit type PGAS 8/100 V-HV both sides/opposite, speed 10 000 rpm. (drive via compressed air) - Cutter holder, both sides/opposite - milling spindle and brush holder arranged one behind the other Prjdpju Ngc Nsfx Alcsa - Operation via control panel on the switch cabinet Support: - 2 x, 1x movable and 1x fixed - Lateral displacement of the right support Length 1725 mm by hand - Working paths transverse=5 - 50 mm; longitudinal=5-50 mm - Working spindle = speed max. 320 rpm *

Year of construction: 2026, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds Pedpfx Aeuia Dqelcera the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.