BINDEMAT a.s.

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator The machine is in very good condition. Fully automatic format setting via the touchscreen monitor. Includes a 4x4mm perforation tool with a cutout for the hanger. Two-module tool. Manufacturer’s description: Perforation device with a working width of up to 360 mm. Designed for continuous operation and heavy loads. The unique „Two-finger” system ensures perfect reception of sheets of varying weights. Two-shelf platen feeder enables continuous operation. After perforation, the sheets rotate around a special drum, maintaining the correct page sequence at the receiving station. Option to use two-piece perforation strips, enabling the perforation of both books and calendars. Perforation up to 2.4mm in a single cycle. Quick and easy replacement of perforation strips. Option to use perforation strips with or without a cutout for the hanger. Quick format changes by disabling selected needles without having to remove the bar. Nlsdpfex N D Ukex Ah Usk A jogging device is located on the delivery. 230V power supply Weight: 720 kg

Condition: good (used), Weber RSM 600 Index Cutting Machine Machine in very good condition, ready for production. This machine cuts registers from finished bindings and loose sheets. Manufacturer’s description: Automatic cutting by activating two manual buttons. Interchangeable knife shapes. Material holding pressure. Capable of cutting large stacks of material in a single pass. Safety guards ensure safety. Nsdpfx Asx N D T Hsh Uolk 380V power supply + compressed air. Stack height for a single cut is approximately 30mm. Approximate dimensions: 120x120x180cm, weight: 900kg.

Condition: good (used), Bookbinding Press 50×40 with Base The machine is fully operational and ready for use. Nsdpfsx N D Tyox Ah Uolk Format: 500×400 mm Pressure: 5 tons

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press Nodpfox N D Spox Ah Uslk The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Nlsdex N Dxvspfx Ah Uok The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Weight: approx. 600kg.

Condition: good (used), Karl Tranklein Z.P. Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Nedpfx Ahjx N Dwlo Uelk Two independent stations. Irreplaceable in bookbinding for the production of books, blocks, etc.

Condition: good (used), Year of construction: 2005, Brand: CMC ITALIA Model: HSV 70-20 Year of manufacture: 2005 Automatic lining and laminating line - Automatic gluing machine Heliomat - Carton Spotter - Glue viscosity mixer 1) HELIOMAT HLM75 Gluing Format: 75 x 115 cm, high-pile feeder Paper size: 70 x 110 cm (max.) | 10 x 15 cm (min.) Mechanical speed: 20 pcs/min Machine control and adjustment via computer or manual operation of main functions. Servo drive for speed and precision Electronic speed regulation Glue recirculation Option includes glue mixer and viscometer Detachable feeder for easy cleaning of the gluing unit Continuous paper feeder Standard conveyor belt 1.5 m Paper detection via photocell Nlodpfox Npb Nsx Ah Ujk Reduced maintenance and cleaning times Quick setups Power supply: 7 kW Weight: 820 kg 2) SPOTTER SPT110 Carton feeder Format: 70 × 110 cm, with external pre-loading Automatic positioning via photocells for 1 to 5 sheets of carton on glued paper Easy and fast format changeover Carton thickness: 0.5 to 4 mm Carton format: max. 70 x 110 cm, min. 15 x 20 cm Mechanical speed: 20 pcs/min Included: loading hopper with original ramp. 3) VIRGO 70 Casemaker Format: 70 × 110 cm, 4-side version Automatic folding from all four sides High precision and power folding on all four sides Easily calendered filling Output data on delivery table Calendar cycle for cover page and edge-to-edge gluing Carton thickness: 1.5 to 4 mm Carton format: max. 70 x 110 cm, min. 14 x 16 cm Mechanical speed: 20 pcs/min Power supply: 3 kW Weight: 960 kg

Condition: excellent (used), Year of construction: 2001, Ref:11046 . 2001 JBI James Burn BB/43H Wire-O Closing Unit Double wire booklet binder Equipped with: Hand feed area with foot operated control Auto closing unit with 2 x closing tools Fully enclosed Perspex guarding Hand feed & delivery table Nledpfx Aox Nfp Njh Uok Specification: Product size, Max: 430 x 610 mm

Condition: excellent (used), Year of construction: 2007, Ref:11044 . 2007 Renz Autopunch AP 360 Off line machine for spiral wire punching Nsdpfxex Nfppo Ah Ujlk Equipped with: Punch sizes: 3:1" round & square hole + thumb cut / 2:1 round hole Jogger delivery Max. format: 360 x 360 x 2.5 mm

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Nodpfxox Nc Aao Ah Ujlk Replaceable blades. Adjustable margins. One set of blades included. Stack height: 100mm Weight: 130kg Cycles per minute: 50 cycles/min Power supply: 400V Waste is collected in containers. This is the model currently in production.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Nledpfx Asx Ncxhoh Usk Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Nlsdpfjx Ncw Rsx Ah Ujk Flexible temperature control.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Njdox Ncw Dspfx Ah Uelk Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Nsdpfx Asx Ncvmeh Uolk Power supply: 380V + compressed air.

Condition: used, Used press / folding sheet press Njdsx Nauaopfx Ah Ujlk

Condition: used, Gluing machine for book blocks With 2 glue application rollers (double glue application in one pass) Nljdpfsx Nad Iex Ah Ujk

Condition: used, Electric gluing machine for applying glue in strip form. Several glue application rollers in various widths are included. The glue reservoir can be adjusted to match the respective roller width. Nodpfx Asx Nadboh Ujlk

Condition: used, Year of construction: 2008, machine/vehicle number: 608, Format: max 310 x 400 x 80 mm, min 100 x 120 x 2 mm Performance: max 3,600 cycles/h Equipment: • Automatic magazine feed with integrated counting stacker • Copilot system Nodpjx I D Emjfx Ah Uolk • 1 set of cutting tables • Knife change device • Central lubrication

Condition: good (used), Baier Geba Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Nlodpfx Aox Hqnxsh Uek Description The Baier Geba hot stamping press is a press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manually operated pressure is powered by only 230V. A powerful pressure with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Heating plate pressure mechanism: mechanical Press force: 5000 kg Power consumption: 9000 W Power supply: 230 V Machine weight: 300 kg Plate size: 32 x 21 cm.

Condition: excellent (used), Year of construction: 2005, Offer consisting of: Very well-maintained block gluing press, year of manufacture 2005 Nledpfx Aex E D Sbeh Uok

Condition: used, Used edge banding machine from a bookbindery closure. Nsdpfx Aex Dtmieh Ujlk - With top glue feed (plastic container with shut-off valve) - Roller width: 60 mm

Condition: used, Used edge banding machine from a bookbinding company closure, Nljdpfx Asx Dthgjh Uok - with hot melt adhesive tank - roller width 60 mm

Condition: used, functionality: unexamined, Used case-making machine from bookbindery closure Nledpfx Ahsx Dtavs Usk

Condition: used, Eyelets diameter: Standard 6 mm (optional 5–5.5 mm) Material: Cardboard, paperboard, plastics Nedpjx Dmaisfx Ah Uolk Drive: Maintenance-free brake motor Eyelets feed: Automatic to upper tool Working depth: Approx. 130 mm Activation: Electric foot switch

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Nljdpfx Ahjx A Sd De Uok Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg