Maschinen Kaiser GmbH

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Release agent application device Sanding unit Gluing system Edge pressure unit End trimming unit Flush trimming unit Corner rounding unit Edge scraper unit Cjdpfxjy Ny S Sj Ac Norb Glue scraper unit Brush unit Control: Power Control PC 22 Available end of July

Condition: used, Year of construction: 2003, machine/vehicle number: 0281062425, Used Edge Banding Machine Year of manufacture: 2003 Equipped with a gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application via roller (co-rotating and counter-rotating modes) Features: Automatic edge magazine (coil and strip material) Pressure zone with pneumatically driven main pressure roller and additional rollers for optimal bonding of the glue layer Centrally adjustable top pressure Central manual lubrication of the chain conveyor Control panel at the machine infeed Machining Units: End trimming unit (saw units) for front and rear overhang 2 motors, each 0.18 kW Swivel range: 0–15° Flush trimming unit (top and bottom) with vertical and horizontal tracing Swivel range: 0–15° 2 motors with interchangeable cutters (straight/radius) Digital counters for fast and precise adjustments Pneumatic two-point adjustment Buffing unit for final finishing Additional Equipment: Extendable support table up to 350 mm Integrated section control (contactless operation) Settings via keyboard and LED display Technical Data: Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Crsdjy Nxgnspfx Ac Njb Location: Bulgaria

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: as is/was in production until recently Equipment and technical data: Glue application unit with glue pot and applicator roller Pressing station Cut-off unit with linear guides Flush trimming unit with horizontal and vertical sensing with 200 Hz motors swivelable 0 - 30° with radius scraper Csdpfx Aey Nuhboc Nsrb with buffing unit Edge thickness 0.4 - 5 mm Coil separation 0.8 x 60 or 3 x 30 mm Workpiece width min. 55 mm Workpiece length min. 160 mm Workpiece thickness 10 - 55 mm Feed rate 11 m/min Pneumatic connection 6 bar Dimensions 3855 x 1000 x 1610 mm Extraction connection 100 mm Weight 1000 kg Availability: approx. June 2026 Location: Baden-Württemberg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Crjdpfx Aoy Nuf Tsc Neb Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: excellent (used), SCM K360 Edgebander Liquids Pre-milling cutters, Glue application with roller, Exchangeable glue tank Second tank included Pneumatic pre-cut guillotine, Finishing saws Pneumatically adjustable Cjdpfx Aey Nlgzsc Nerb Top/bottom milling aggregate R1-R2, pneumatically adjustable Corner rounding unit, pneumatically adjustable Profile scraper Cleaning fluids Flat scraper Polishing unit Max. workpiece height 60mm Max. edge thickness in roll 3mm Feed speed 11m/min Original mileage 135,000m Very good condition Possibility to check and test on site

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Csdpjy Nk Ahsfx Ac Norb

Condition: used, machine/vehicle number: 007176, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Codpfxjy Nkvhe Ac Nsrb Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007673, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Credpfxjy Nkukj Ac Neb Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Credpfx Aey Nktysc Neb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 005321, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Cjdpfx Aey Nkrcoc Nsrb Max feed speed: 35 m/min Maximum panel thickness: 40 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006089, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Crjdpjy Nknwjfx Ac Neb Operating Units: 8 nr

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Hebrock EURO 2000 Edge Banding Machine – fully refurbished, immediately ready for use For sale is a highly reliable and robust edge banding machine made in Germany. The machine has been mechanically overhauled and is ready for operation – ideal for joineries looking for a durable solution without investing in new machinery. Radius and chamfer settings are pneumatically adjustable. The machine can be tested on site. Condition / Work carried out: - All pneumatic hoses replaced - 2 main cylinders new Crodpoy Nd H Hofx Ac Neb - Machine thoroughly cleaned - Technically inspected and ready for use Technical Data: - Manufacturer: Hebrock GmbH (Made in Germany) - Model: EURO 2000 - Year of manufacture: 2001 - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 7 kW - Current draw: 13.6 A Working range: - Workpiece thickness: approx. 10 – 50 mm - Edge thickness: approx. 0.5 – 3 mm - Minimum workpiece length: approx. 250 mm - Minimum workpiece width: approx. 70 mm - Feed speed: approx. 10 m/min - Compressed air connection required (approx. 6–7 bar) Delivery within a 150 km radius available for an additional charge.

Condition: good (used), Code: 0380 Brand: CASADEI INDUSTRIA Model: V 20/10 - CE Standard Crodpfey Ndymex Ac Nob Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2100 x 700 x 1250 h Weight kg 350

Condition: used, machine/vehicle number: 005335, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 60 mm Operating Units: 13 nr Csdpfx Acsy I Trcj Nsrb

Condition: good (used), Year of construction: 2023, For inquiries: Zoltán Utasi +36 30 205 7380 • Edgebander for the edging and post-machining of materials in panel • form (such as chipboard panels, MDF panels, tabletops, etc.) • Edging thickness of coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: 0,4 - 5 mm • Edging height: max. 55 mm • Panel thickness: 8 - 50 mm • Edging cross section: max. 5 x 50 mm (depending on material) • Workpiece width: min. 70 mm • Workpiece length: min. 180 /210 mm • Feed speed: 9 m/min. • with manual pressure bridge adjustment • Pull-out workpiece support, distance 500 mm • Control unit Edge Control BC 15 with 15.6" touch screen • Vi.se. (VIsual SEtting mode) provides all setting values for the digital counters and pressure gauges as a digital logbook to set up the machine quickly and safely. • Pre-milling unit FG101 with 2 diamond cutter heads • Edge feeder MG101 • Glu Jet hybrid technology GJ101 (2,3 kW, 50 Hz): automatic adjustment of gluing height (tracing nozzle) • Hopper for 1,4 kg glue cartridges (4 cartridges) • Glu Jet rinse hopper • Automatic refill function • Pressure unit DW101 • End trimming unit KA101 (50 mm) pneumatic plunge in 1-motor 0.22 kW, 12000 rpm • Trimming unit FR101: multifunctional milling unit Flush, Radius Cedpfsy I Srujx Ac Nerb 2 x 0,37 kW, 12000 rpm 2 x HW insert milling cutter Ø 75, Z4, R2 • Corner rounding unit FF101 on double linear guide • Scraper unit ZK101 R=2,0 mm • Chip collector • Surface scraper unit FK101 • Buffing unit SW101(2 x 0.13 kW, 1,400 min-1) For cleaning and edge polishing, with 2 textile discs Ø 120 mm pivotable 0 - 5° • Sprayer TR101 for the in- and outfeed area

Condition: excellent (used), functionality: fully functional, Automatic edgebander machine OCMAC SHF 800 second hand machine machine ideal for solid wood edges up to 30 mm thick with 4 sanding units machine composition: 1.gluing group with glue tank 2.pressure rollers 3.edge feeder 4. Dual-motor end trimming units 5. Dual-motor trimming units 6. Dual-motor edge trimming units 7. Spindle moulder Crsdoy I R Izopfx Ac Nsb n.4 sanding units cabin machine machine length approx. 900 cm

Condition: used, Year of construction: 2019, machine/vehicle number: MR002728, Used: edge banding machine for applying edge band and solid strips up to a thickness of 5mm. Equipped with a combined milling unit for longitudinal and cross edges. Machine features include pre-milling unit, end trimming operations, and an additional glue pot. The machine comes with the following options: - Radius scraper unit - Brush unit - Glue scraper unit - Quick-change system for glue tank - Spare glue tank Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 3 mm - Maximum strip thickness: 5 mm - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Minimum panel length: 120 mm - Minimum panel width: 110 mm - Exchangeable glue pot: Yes - Feed speed: 7 m/min - Glue tank capacity: 0.8 kg Cedpfjy I Rf Hsx Ac Njrb - Pre-milling unit present: Yes - Pre-milling tool diameter: 80 mm - Pre-milling tool height: 56 mm - End trimming unit: HM saw blade - End trimming unit saw blade diameter: 125 mm - End trimming unit speed: 12,000 rpm - Radius and straight milling unit: Yes - Milling tool diameter: 58 mm - Milling unit speed: 12,000 rpm - Radius scraper unit: Yes - Glue scraper unit: Yes - Anti-adhesion spray unit: Yes - Brush unit: Yes - Cleaning spray unit: Yes - Serial number: KK00006654

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Release agent application device Grinding unit Gluing system Edge pressing unit End trimming unit Radius milling unit Corner rounding unit Edge scraper unit Glue scraper unit Crodpfoy I Dnuex Ac Njb Brush unit Barcode reader Weight approx. 1600 kg. Available immediately

Condition: used, Year of construction: 2008, machine/vehicle number: 0-261-06-5499, functionality: fully functional, workpiece height (max.): 42 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,600 mm, total length: 4,800 mm, total width: 800 mm, year of last overhaul: 2026, Edge banding machine is being sold due to the purchase of a new machine and conversion to PU. Maintained regularly, runs flawlessly. Includes two additional gluing units. Suction pipe assembly included. The machine is still in operation and can be inspected and tested. Cedpoy I Apkofx Ac Norb

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Equipment: CE marking, documentation/manual, Automatic edge bander with EVA glue pot, chain panel feed, pre-milling, and corner rounding units. Technical features and options: • Feed speed: 9 m/min • Permissible panel thickness: 8 – 50 mm • Permissible edge thickness in rolls or strips: 0.4 – 3 mm • Permissible edge thickness in strips (manual feed): max 5 mm • Maximum edge roll diameter: 800 mm • Minimum panel length: 110 mm • Minimum panel length for cross-cut unit VR1/VS1: – With workpiece height h=18 mm: 180 mm – With workpiece height h=50 mm: 210 mm • Minimum panel width: 70 mm Machine equipment: Codpjy Izktefx Ac Nerb • Conveyor belt with rubber pads • Pressure beam with bearing-mounted rubber rollers • Automatic edge feeder • Pressure rollers • Extendable support for safe positioning of large workpieces • Touchscreen control panel • Automatic cleaning agent spray unit (for easier removal of glue residue and to reduce glue buildup) • FLEX quick-change glue pot system • Internal LED lighting • CE certification

Condition: new, Year of construction: 2026, Hebrock - Altendorf Edge Bander F5 next - Brand new machine, still in original packaging with complete equipment - With PLC control including 15" touchscreen - Edge material up to 3 mm - Whispercut jointing head including DIA tool up to 2 mm - Coated maintenance-free glue pot, PUR interchangeable tank - Includes glue drain device downwards - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper - Surface scraper including pneumatic lift device - Buffing station - Combination milling head - Radius milling head R = 2 mm - Radius corner milling unit R = 2 mm - Quick-change system for corner milling unit Crjdpfsy Iw Nrex Ac Nob - Additional changeover motor for corner milling unit with tooling - Radius changeover motor R = 1 mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Underframe - Additional interchangeable glue pot including stand - Spray system for release agent PUR - Spray system for cleaning agent PUR - Spray system for edge PUR/foil - Nesting for milling head and radius scraper - Pneumatic 3-point adjustment (radius, chamfer, flush trimming) - Jointing up to 50 mm workpiece thickness - LED lighting inside - Workpiece thickness 8–50 mm - Min. workpiece length approx. 160 mm - Feed speed approx. 10 m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55 m - Weight: gross: 990 kg; net: 930 kg - Extraction nozzle 1 x 140 mm Delivery and commissioning possible.

Condition: used, functionality: fully functional, edge thickness (max.): 3 mm, Used Single-Sided Automatic Edge Banding Machine The SCM Olimpic K208 is a reliable, industrial-grade automatic edge banding machine designed for precise and continuous edge processing of furniture panels and other wood-based boards. It is suitable for processing melamine, PVC, veneer, and coiled edge materials, making it an excellent choice for carpentry workshops, furniture manufacturing facilities, and small production lines. Key Features Type: Single-sided automatic edge banding machine Manufacturer: SCM Group, Italy Model: Olimpic K208 Application: Edge banding of furniture panels and wood-based boards Processable edge materials: Melamine, PVC, veneer, coiled edge banding Technical Specifications Panel thickness: 10–55 mm Panel thickness with profiling unit: 10–45 mm Edge band thickness: approx. 0.4–10 mm Minimum workpiece length: 140 mm Feed speed: approx. 11 m/min Minimum workpiece width: depending on configuration approx. 100–130 mm (in some listings as low as 65 mm) Standard Equipment Glue unit Crodsy Iwu Uepfx Ac Nob End trimming unit (front and rear) Top and bottom trimming / milling unit Corner rounding unit (on certain configurations) Scraping and polishing unit Upper pressure beam Chain feed system The SCM Olimpic K208 is a compact yet efficient solution for edge banding operations. Its robust construction, continuous feed system, and the well-known reliability of SCM machinery make it an ideal choice for daily industrial use, particularly in panel-based furniture production.

Condition: used, Year of construction: 2006, functionality: fully functional, operating hours: 0 h, input voltage: 380 V, total height: 1,700 mm, total length: 5,700 mm, total width: 1,150 mm, overall weight: 1,500 kg, We are offering this fully operational HOLZ-HER SPRINT 1312 edge banding machine, year of manufacture 2026. Type: 1312 Equipment number: 1337/0-506 Serial number: 5002547 The machine is in operation until mid-May and will then be replaced with a new one. The machine can be tested at any time, even though it is located in an adjacent building. Loading with a forklift is possible without any issues. Collection only. If you have any questions or need further information, feel free to send us a message or give us a call. Crjdpfxoy Ir Ays Ac Nob

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Csdpfx Aoy In Dgec Nsrb Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Cjdpfsy In A Nox Ac Njrb Maximum panel thickness: 60 mm Operating Units: 8 nr