Jerzy Gawel
Jerzy Gawel from Gelsenkirchen
This dealer has not yet provided a company description.
Mr Jurek Gaweł
Irmgarfstr 3
45888 Gelsenkirchen
Germany
Current offers from similar dealers
Listing
Huisheim
1,207 km
Coordinate measuring machine
WenzelLH108
WenzelLH108
Call
Condition: good (used), Year of construction: 2007, Technical Data
WENZEL LH 108
Year of Manufacture: 2007
Measuring Range
X Axis: 1,000 mm
Y Axis: 3,000 mm
Z Axis: 800 mm
Machine Type
Bridge-type coordinate measuring machine
Granite guides
Air-bearing axes
Measuring Accuracy
Length measurement deviation approx. 1.3 µm + L/400
(depending on configuration and calibration status)
Probe Systems
Renishaw probe heads possible
Touch trigger and scanning
PH10, TP20, SP25, SP80 depending on equipment
Workpiece Weight
Permissible table load up to approx. 2,000 kg (depending on configuration)
Control
CNC control with manual control unit
Software
Metrosoft CM Version 3.112
WENZEL Quartis R16
Electrical Supply
230 V, 50/60 Hz
Power consumption approx. 1 kVA
Pneumatic Supply
Nsdpfx Ahex N H U Hj Uolk
Compressed air 6 to 10 bar, filtered and dry
The machine can be tested under power.
Dismantling will be carried out by Wenzel.
Listing
Töltéstava
1,692 km
Patient Lift + battery charger
ArjohuntleighSara Plus
ArjohuntleighSara Plus
Call
Condition: used, !!! The listing includes the lift and all the accessories pictured !!!
The ArjoHuntleigh Sara Plus is a powered sit-to-stand lift for patient transfers and rehab, featuring a 420 lbs (190 kg) weight capacity, an adjustable chassis, an integrated scale, and optional commode seat for active lifting and balance training with caregiver control via handset or dual panel. Key specs include a max lift height of ~59", min lifting height ~35", total weight ~187 lbs, and a rechargeable 24V battery.
Key Specifications
Max User Weight: 420 lbs (190 kg).
Weight (Lift): ~187 lbs (85 kg) including battery.
Max Lift Height: ~58-59 inches (149 cm).
Min Lift Height: ~35-36 inches (91 cm).
Chassis Width (Open): ~39.5 inches (1002 mm).
Chassis Width (Closed): ~25.4-25.75 inches (644 mm).
Battery: 24V Sealed Acid (4Ah or 6Ah models exist).
Key Features
Support: Arc-Rest with handgrips for patient support, Proactive Pad™ for lower leg comfort.
Controls: Handset & dual control panel with up/down, chassis open/close, emergency stop.
Rehab: Detachable footplate and optional removal of the Proactive Pad for walking/gait training.
Convenience: Built-in electronic scale, optional commode seat, service meter, low-friction castors with brakes.
Safety: Emergency lowering override, automatic safety cut-out, battery indicator.
Good working condition.
Please check out our other listings as well.
Nljdpfx Ahjx N H Uyo Usk
Listing
Roosendaal
674 km
Crane truck
Mercedes-BenzSK 3538 + NEW!! UNUSED!! 1.216km + 142H + FASSI...
Mercedes-BenzSK 3538 + NEW!! UNUSED!! 1.216km + 142H + FASSI...
Call
Condition: excellent (used), mileage: 1,216 km, power: 279 kW (379.33 HP), first registration: 05/1995, fuel type: diesel, fuel: diesel, gearing type: mechanical, emission class: euro1, Year of construction: 1995, operating hours: 142 h, Equipment: crane, = Additional Options and Accessories =
- Power Take-Off (PTO)
= Notes =
WDB6251361K111302
= Further Information =
Mast: Telescopic (14 sections)
Mast length: 31 m
Lifting capacity: 22,000 kg
Body brand: FASSI 1300AXP.28
CE certification: yes
Technical condition: very good
Visual condition: very good
Please contact Sales for more information.
= Company Information =
If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the given information.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian (Available on What’s App and Viber)
MOB: Dutch (Available on What’s App and Viber)
Nlsdpex N H Uasfx Ah Uok
When paying by bank transfer, please ensure that the funds are transferred to our bank account listed below. Always verify the payment details stated on our website. If you receive different information, please contact us immediately. If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Listing
Huisheim
1,207 km
Universal machining center
Deckel MahoDMC 70 eVo
Deckel MahoDMC 70 eVo
Call
Condition: good (used), Year of construction: 2007, Equipment: chip conveyor, Technical Data
DECKEL MAHO Seebach GmbH
4 Technical Data
4.1 Main Drive 18,000 rpm
AC servomotor motor spindle
Torque available at the spindle, considering efficiency – see diagram
Motor power at 100% duty cycle – see diagram
Motor power at 40% duty cycle – see diagram
Spindle speed infinitely programmable: 20 to 18,000 rpm
Setup mode speed: 20 to 800 rpm
Performance diagram 02.273697
18,000 rpm star-delta connection
Torque Nm
Power kW
Nledpfx Ahox N H T No Ujk
4.3 Feed Drive
AC servomotors for X, Y, Z axes
Feed rate X/Y/Z infinitely programmable up to 20,000 mm/min
Input increment X/Y/Z: 0.01 mm
Rapid traverse X/Y/Z: 50 m/min
Setup mode X/Y/Z: 20 to 2,000 mm/min
4.5 Position Measuring System
Resolution X/Y/Z: 0.001 mm
Position tolerance X/Y/Z with direct measuring system: 0.010 mm
4.6 Working Area
Travel X axis: 750 mm
Travel Y axis: 600 mm
Travel Z axis: 520 mm
4.7 Main Drive
Working spindle: SK HSK
Tool holder: steep taper SK 40 DIN 69871 A
Tool clamping: hydraulic/mechanical
4.8 Tool Changer with Magazine SK
Working spindle: 18,000 rpm
Magazine positions: 92
Tool length from spindle nose: 315 mm
Max tool weight (automatic change): 6 kg
Max total tool weight in magazine: 270 kg
Retention studs
4.9 Work Table
NC rotary table with swivel axis
Clamping surface rotary axis: 500 x 500 mm
Centering bore: 50 H6
Max table plate speed: 21.5 rpm
Max torque rotary axis: 1,674 Nm
Max swivel torque: 2,019 Nm
Swivel speed: 18.9 rpm
Swivel range: 180 degrees
Input/display increment: 0.001 degrees
Weight abt. 310 kg
Max. table load (centered): 250 kg
Max. workpiece diameter: 628 mm
Max. workpiece height: 500 mm
4.10 Pallet Changer
2 pallets with pitch hole grid
Rotary movement: 180 degrees
Longitudinal travel: 350 mm
Lift: 75 mm
Permissible load (one sided): 250 kg
Permissible load (both sides): 500 kg
4.11 Installation Data
Electrical supply according to EN 60204-1
Machine connection: TN S system L1 L2 L3 N PE
Main connection: 3N PE, 50/60 Hz, 400/230 V
Rated current at 100% duty cycle: 82 A
Power consumption at 100% duty cycle: 57 kVA
Max. pre-fuse: 100 A
Pre-transformer
Free cable length above floor: 0.8 m
Connection cable as per DIN 5710 VDE 0100
Pneumatic Supply
Compressed air, condensate-free and dust-free
Recommended filter fineness: 50 μm
Air volume without blow air: 50 m³/h
Additional blow air for tool cooling: 25 m³/h
Air pressure: min. 5.5 bar, max. 8 bar
Pressure connection (machine side): Bosch 1823 351 01
Listing
Roosendaal
674 km
Refrigerated/frozen transport
Mercedes-BenzAntos 1924 + euro 6 + CARRIER 1150 + LIFT
Mercedes-BenzAntos 1924 + euro 6 + CARRIER 1150 + LIFT
Call
Condition: excellent (used), mileage: 416,367 km, power: 175 kW (237.93 HP), first registration: 07/2014, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,650 mm, total width: 2,600 mm, loading space length: 7,600 mm, loading space width: 2,460 mm, loading space height: 2,530 mm, Year of construction: 2014, Equipment: AdBlue, tail-lift, WDB9630031L872834
Refrigeration Unit Brand: Carrier
= Further Information =
Technical Information
Number of cylinders: 6
Engine displacement: 7,698 cc
Maximum front axle load: 7,500 kg
Maximum rear axle load: 11,500 kg
Weights
Unladen weight: 10,280 kg
Payload: 8,720 kg
Gross vehicle weight: 19,000 kg
Functional
Tail lift: CARGOLIFT
Refrigeration engine: Diesel and electric
Maintenance, History and Condition
APK (Technical Inspection): certified until 03/2026
Technical condition: very good
Visual condition: very good
Identification
Registration number: 61-BFB-3
Additional Information
Contact Sales for further information.
Nlodpfxsx N H T As Ah Uok
= Company Information =
If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the information provided.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber).
MOB: Dutch (Available on WhatsApp and Viber).
When paying by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details published on our website. If you have received different information, please contact us.
If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Listing
SON EN BREUGEL
732 km
Panel van
ToyotaPROACE CITY 1.5 D-4D 102PK Runner L2 - Airco - ...
ToyotaPROACE CITY 1.5 D-4D 102PK Runner L2 - Airco - ...
Call
Condition: used, mileage: 93,124 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 2,980 mm, first registration: 01/2021, fuel tank capacity: 60 l, CO₂ emissions: 149 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), fog lights, immobilizer system, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, General information
Number of doors: 5
Model range: Apr 2020 - Jul 2021
Cab: single
Technical information
Torque: 250 Nm
Number of cylinders: 4
Engine capacity: 1.499 cc
Transmission: 5 gears, Manual gearbox
Acceleration (0-100 kph): 11,7 s
Top speed: 164 km/h
Measures
length/height: L2H1
Dimensions (LxBxH): 475 x 185 x 188 cm
Weights
Empty weight: 1.398 kg
Carrying capacity: 977 kg
GVW: 2.375 kg
Nodpfsx N H Tpsx Ah Uslk
Interior
Interior: black
Consumption
Average fuel consumption: 4,1 l/100km (69 MPG)
Maintenance, history and condition
Service history: Present
APK (MOT): tested until 07/2026
Number of keys: 2 (2 hand transmitters)
Financial information
Ask for the financial lease options
Product safety
Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL
Listing
SON EN BREUGEL
732 km
Panel van
VolkswagenCaddy 2.0 TDI EURO 6 - Airco - Navi - Cruise - ...
VolkswagenCaddy 2.0 TDI EURO 6 - Airco - Navi - Cruise - ...
Call
Condition: used, mileage: 127,100 km, power: 55 kW (74.78 HP), first registration: 10/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,680 mm, fuel: diesel, CO₂ emissions: 153 g/km, fuel tank capacity: 55 l, color: white, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, total length: 4,410 mm, total width: 1,790 mm, total height: 1,860 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, trailer coupling, General information
Number of doors: 4
Model range: Jul 2019 - Dec 2020
Cab: single
Technical information
Torque: 225 Nm
Number of cylinders: 4
Engine capacity: 1.968 cc
Acceleration (0-100 kph): 16,4 s
Top speed: 152 km/h
Measures
length/height: L1H1
Weights
Empty weight: 1.385 kg
Carrying capacity: 767 kg
GVW: 2.152 kg
Interior
Interior: black
Consumption
Average fuel consumption: 5,1 l/100km (55 MPG)
Urban fuel consumption: 6,1 l/100km (46 MPG)
Extra urban fuel consumption: 4,6 l/100km (61 MPG)
Maintenance, history and condition
Service history: Present (serviced by dealer)
Number of owners: 3
APK (MOT): New APK (MOT) upon delivery
Number of keys: 2 (2 hand transmitters)
Nlsdpfx Aex N H Srsh Uok
Financial information
Ask for the financial lease options
Product safety
Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL
Listing
Roosendaal
674 km
Refrigerated/frozen transport
DAFXF 105.410 + 6X2 + EURO 5
DAFXF 105.410 + 6X2 + EURO 5
Call
Condition: excellent (used), mileage: 1,185,781 km, power: 300 kW (407.89 HP), first registration: 12/2006, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 10,600 mm, total width: 2,600 mm, loading space length: 8,130 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, Year of construction: 2006, Equipment: AdBlue, XLRAS447MS0E740725
Refrigeration unit brand: TRS
= Additional Information =
Technical Information
Number of cylinders: 6
Engine displacement: 12,902 cc
Axle configuration
Maximum front axle load: 7,500 kg
Rear axle 1: Max. axle load: 11,500 kg
Rear axle 2: Lift axle; Max. axle load: 7,500 kg
Weights
Unladen weight: 11,689 kg
Payload: 14,811 kg
gross vehicle weight (GVW): 26,500 kg
Functional
Bodywork brand: TRS
Refrigeration engine: Diesel and electric
Condition
Technical condition: very good
Visual condition: very good
Identification
Registration number: BS-PF-49
Further Information
Please contact Sales for more information.
= Company Information =
If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the given information.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber.
MOB: Dutch) Available on WhatsApp and Viber.
When you pay by bank transfer, the funds must be transferred to our bank account listed below. Always check the payment details indicated on our website. If you have received other information, please contact us.
If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Nljdpfx Ahex N H Sls Ujk
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Listing
Bruchsal
1,071 km
Horizontal machining center
TSUGAMIMA 3 H -10P
TSUGAMIMA 3 H -10P
Call
Condition: good (used), TSUGAMI MA 3 H - 10P Horizontal Machining Center with 10-Position Pallet Changer
- FANUC 11-M control system
- Travel X/Y/Z: 340x260x400 mm
Nlsdsx N H Sfepfx Ah Usk
- 10-position pallet changer
- B-axis 360° indexing, 0.001 mm resolution
- Spindle speed range: 36-5000 rpm
- Feed rate range: 1-6000 mm/min
- Rapid traverse: 12 m/min
- Tool holder: BT 40
- Double-arm tool changer
- Tool magazine with 62 stations
- Drive/Spindle motor power: 7.5 kW
- Electronic handwheel
- Chip conveyor
- Centralized lubrication system
- Coolant system
- RS 232 data interface
- Spindle oil cooler
- Documentation included
Dimensions (LxWxH): 4 x 2.4 x 2.4 meters / Weight: 7,000 kg
Errors and omissions excepted.
Listing
Roosendaal
674 km
Suitcase
Mercedes-BenzActros 2546 + 6X2 STEERING + LIFT + 2.85 HEIGHT
Mercedes-BenzActros 2546 + 6X2 STEERING + LIFT + 2.85 HEIGHT
Call
Condition: excellent (used), mileage: 492,466 km, power: 335 kW (455.47 HP), first registration: 05/2007, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 10,360 mm, total width: 2,550 mm, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 2,850 mm, Year of construction: 2007, Equipment: AdBlue, tail-lift, WDB9302051L216005
= Further Information =
Technical Details
Number of cylinders: 6
Engine displacement: 11,946 cc
Axle Configuration
Maximum front axle load: 7,500 kg
Rear axle 1: Max. axle load: 11,500 kg
Rear axle 2: Lift axle; Max. axle load: 7,500 kg
Weights
Nledpox N H R Isfx Ah Usk
Unladen weight: 11,720 kg
Payload capacity: 14,780 kg
Gross vehicle weight: 26,500 kg
Functional
Tail lift: Dhollandia, 1,500 kg
Condition
Technical condition: very good
Visual condition: very good
Identification
Registration number: BS-XS-94
Further information
Please contact our Sales team for more information.
= Company Information =
If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the above information.
Office Phone:
MOB: Nederlands - English - Deutsch - Francais - Español - Italiano) Available on WhatsApp and Viber.
MOB: Nederlands) Available on WhatsApp and Viber.
If you pay by bank transfer, the payment must be made to our bank account below. Always verify the payment details as stated on our website. If you have received other information, please contact us.
If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Listing
Huisheim
1,207 km
Universal machining center
DMGDMU 75 Monoblock
DMGDMU 75 Monoblock
Call
Condition: good (used), Year of construction: 2014, DMG MORI DMU 75 monoBLOCK
Year of manufacture: 2014
Control system
Siemens SINUMERIK 840D sl
ShopMill
Working area / Axes
Traverse paths X / Y / Z: 750 / 650 / 560 mm
5-axis simultaneous machining
NC swivel rotary table
Table / Workpiece
Table size: Ø 650 mm
Max. table load: 600 kg
Max. workpiece dimensions: Ø 840 mm, height 500 mm
Spindle
Tool holder: SK40
Max. speed: 18,000 rpm
Through-spindle coolant (IKZ): 40 bar
Feeds / Dynamics
Nedox N H Rzepfx Ah Uslk
Rapid traverse X/Y/Z: 40 m/min
Feed rate: up to 40,000 mm/min
Acceleration: 6 m/s²
Tool changer
Chain magazine: 60 tool positions
Max. tool weight: 8 kg
Max. tool length: 315 mm
Max. tool diameter:
Ø 80 mm (adjacent positions occupied)
Ø 160 mm (adjacent positions free)
Tool change time (chip-to-chip): approx. 4.9 s
Chip removal
Chip conveyor
The machine is supplied with a newly packaged window/disc.
Listing
Roosendaal
674 km
Standard-SZM
IvecoStralis 420 + EURO 6 + SPOILER
IvecoStralis 420 + EURO 6 + SPOILER
Call
Condition: excellent (used), mileage: 563,537 km, power: 309 kW (420.12 HP), first registration: 10/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,250 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: AdBlue, WJMM1VSH60C335861
= Further Information =
Technical Information
Number of cylinders: 6
Engine displacement: 11,120 cc
Maximum front axle load: 7,500 kg
Maximum rear axle load: 11,500 kg
Weights
Unladen weight: 8,284 kg
Payload: 11,516 kg
Gross vehicle weight (GVW): 19,800 kg
Maintenance, History and Condition
APK (Roadworthiness Inspection): valid until 2026
Technical condition: very good
Visual condition: very good
Identification
Registration number: 50-BHS-4
Further Information
Please contact Sales for more information.
= Company Information =
If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the provided information.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber).
MOB: Dutch (Available on WhatsApp and Viber).
Nsdpfx Ajx N H Rueh Uolk
When you pay by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details stated on our website. If you have received different information, please contact us.
If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Listing
Roosendaal
674 km
Suitcase
IvecoEurocargo 150E25 + lift + euro 5 EEV + 3P
IvecoEurocargo 150E25 + lift + euro 5 EEV + 3P
Call
Condition: excellent (used), mileage: 575,157 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, wheelbase: 5,170 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,330 mm, Year of construction: 2012, Equipment: AdBlue, tail-lift, = Further information =
Number of cylinders: 6
Engine displacement: 5,880 cc
Unladen weight: 8,300 kg
Payload: 6,700 kg
Gross vehicle weight: 15,000 kg
Tail lift: Dhollandia, 1,500 kg
Technical condition: very good
Visual condition: very good
For more information, please contact Sales.
= Company information =
Nlodpfx Ahex N H Rhe Uok
If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours.
Prices are excluding VAT.
No rights can be derived from the given information.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber)
MOB: Dutch (Available on WhatsApp and Viber)
If you pay by bank transfer, please ensure the money is transferred to the bank account below. Always verify the payment details as stated on our website. If you have received differing information, please contact us.
If in doubt, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Listing
Huisheim
1,207 km
CNC lathe
SpinnerTC400
SpinnerTC400
Call
Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner
Model: TC-400
Year of manufacture: 2014
Nljdpfex N H Rbjx Ah Uek
Control unit: Fanuc 32iTB
Maximum bar capacity: Ø 52 mm
Features:
- Short bar loader Spinner Servo-Load 80-1500V2 with support stand
- Control: Fanuc 32iTB with color LCD display/operator panel 1
- Drive motors for X/Z axes and spindle by GE Fanuc, digital AC technology
- Travel distances: X=200 mm, Z=515 mm
- Main spindle speed up to 5,000 rpm / 52 mm
- Power: 18 kW
- Torque: 113 Nm (S6=40%)
- Main spindle: integrated motor spindle with water cooling, spindle nose A6
- C-axis for spindle incl. software option "Transmit" for face machining and "cylindrical interpolation" for peripheral machining
- Hydraulic hollow clamping cylinder, 12-position turret for tool holders according to DIN 69880/30 mm
- 12 live tool stations on turret for milling and drilling operations
- Tailstock for TC400, MK4
- Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump 50 l/min, 3.3 bar
- Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner
Listing
Huisheim
1,207 km
CNC lathe
WEILERDZ 45
WEILERDZ 45
Call
Condition: good (used), Year of construction: 2008, CNC Lathe Weiler DZ 42
Year of manufacture: 2008
Control: Siemens 840D / Shopturn
Nedpfex N H Nkox Ah Uslk
Manual loading up to D 220 mm
Material passage: 42 mm
Max. turning length: 450 mm
Spindle speed: 6300 rpm
Machining
Turret with 16 driven tools
X/Z/Y / C-axis
Collet chuck
Listing
Huisheim
1,207 km
Vertical machining center
Deckel MahoDMC 835V
Deckel MahoDMC 835V
Call
Condition: good (used), Year of construction: 2007, Manufacturer
DMG
Model
DMC 835
Year of manufacture
2007
Control system
Siemens 840D / Shop Mill
X-axis travel
835 mm
Y-axis travel
510 mm
Z-axis travel
510 mm
Spindle speed
10,000 rpm
Feed rate
Programmable up to 15 m/min – rapid traverse 30 m/min
Positioning tolerance
0.008 mm
Tool magazine
Nodpjx N H I Tjfx Ah Ujlk
30 stations
Tool breakage control
Optical (laser)
Weight
approx. 6.5 t
Listing
Huisheim
1,207 km
CNC lathe
DMGNEF 600 V3
DMGNEF 600 V3
Call
Condition: good (used), Year of construction: 2012, Year of manufacture: 2012
Maximum turning diameter: 600 mm
Maximum turning length: 1,200 mm
Control: Siemens 840D sl
Swing diameter over bed slide: 490 mm
Main spindle:
Maximum speed: 3,500 rpm
Drive power - main spindle: 37 / 28 kW
Maximum torque: 790 / 590 Nm
Spindle nose: 220h5
C-axis resolution: 0.001°
Spindle diameter at front bearing: 160 mm
Spindle bore: 118 mm
Maximum usable bar diameter: 92 mm
Maximum chuck diameter: 315 mm
Tool turret:
Number of tool positions: 12 positions
Tool holder: VDI 40 DIN 69880
Number of driven tool stations: 12 positions
Speed range - driven tool stations: max. 4,000 rpm
Drive power - driven tool stations: 7.5 kW
Maximum torque: 36 Nm
Travels:
X-axis travel: 398 mm
Z-axis travel: 1,250 mm
Nodpfx Aox N H I Hjh Uslk
C-axis: 360°
Tailstock:
Tailstock quill travel: 1,150 mm
Clamping force: 12.5 kN
Tailstock taper: MK 5
Feeds:
Rapid traverse (X / Z): 30 m/min
Feed force X: 6.2 kN / Z: 10 kN
Total connected load: approx. 50 kW
Machine weight: approx. 5.3 t
Space requirement: approx. 6.5 x 3.5 x 2.3 m
Operating hours: 44,000
Spindle hours: 15,500
Listing
Huisheim
1,207 km
CNC lathe
SpinnerTC 800-77 MCY
SpinnerTC 800-77 MCY
Call
Condition: good (used), Year of construction: 2014, Spinner TC 800-77 MCY
Year of manufacture: 2014
Maximum turning diameter: 500 mm
Maximum turning length: 900 mm
Control: Fanuc 31i
Maximum swing diameter: 800 mm
Main spindle:
Maximum speed: 3,200 rpm
Drive power (main spindle): 24 / 33 kW
Maximum torque: 630 Nm
Chuck diameter: 250 mm
Spindle nose: A8
Bar capacity: 77 mm
Travel distances:
X-axis: 360 mm
Nlsdpfx Ahex N H Ite Uek
Y-axis: 120 mm (-55/+65)
Z-axis: 900 mm
C-axis: 360°
Tool turret:
Tool stations: 12 positions
Driven stations: 12 positions
Tool holder: VDI 50
Speed range (driven tool stations): max. 4,000 rpm
Drive power (driven tool stations): 5 / 9.6 kW
Torque: 18 / 35 Nm
Feeds:
Rapid traverse X: 15 m/min / Z: 24 m/min
Total power requirement: - kW
Machine weight approx.: 7.5 t
Space requirement approx.: 4.3 x 3.0 x 2.2 m
Control ON hours: 44,700
Operating hours: 8,518
Machining hours: 6,631
Listing
Huisheim
1,207 km
CNC lathe
GildemeisterCTX 410 V4
GildemeisterCTX 410 V4
Call
Condition: good (used), Year of construction: 2009, Manufacturer: Gildemeister
Model: CTX 410 V4
Year of manufacture: 2009
Control: Heidenhain plus IT
Travel: X 170 mm, Z 635 mm, Y +/-40 mm
Program run time: 11,400 h
Spindle
Nledpfex N H H Nox Ah Usk
Spindle speed: 5,000 rpm
Spindle bore: 65 mm
Turning diameter over cross slide: 375 mm
Turning length: 635 mm
Turret
Tool holder: VDI30
Number of stations: 12 with AGW
Dimensions and weight
Dimensions: 5,000 mm x 2,500 mm x 2,800 mm
Weight: approx. 5,800 kg
Listing
Huisheim
1,207 km
Vertical machining center
DMGDMC 635
DMGDMC 635
Call
Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Vertical Machining Center DECKEL MAHO DMC 635V
CNC Control: Siemens 840D
Axes
Travel X-axis mm: 635
Travel Y-axis mm: 510
Travel Z-axis mm: 460
Distance spindle nose to table surface mm: 720
Feed rates m/min: 20
Rapid traverse m/min: 30
Axis acceleration m/s2: 5
Working Table
Number of pallets: 1
Pallet dimensions mm: 560×790
Max. workpiece weight kg: 600
Spindle
Max. spindle speed rpm: 14,000
Spindle drive power kW: 18.5/15 (40%ED/cont)
Spindle torque Nm: 100/74
Tool System
Njdpfxox N H H Ae Ah Ujlk
Tool holder: SK40
Number of tools in magazine: 20
Electronic handwheel
Chip conveyor
Air blast through spindle center selectable via M-function
Direct measuring system XYZ
Machine running hours:
Power-on hours: 14,500
Spindle operating hours: 3,600
Total power requirement kVA: 35
Base machine: Dimensions/ Weight
Length mm: 2,275
Width mm: 3,288
Height mm: 2,670
Weight: 4.5 t
Listing
Kreuztal
907 km
Hydr. Press brake
AMADAHFE 170/4L 4100 x 170 to
AMADAHFE 170/4L 4100 x 170 to
Call
Condition: excellent (used), Year of construction: 2003, Technical Data:
Working length: 4230 mm
Distance between uprights: 3650 mm
Press force: 170 tons
CNC control: AMADA Operator III graphic
Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2
Motorized adjustable backgauge
Stroke: 400 mm
Automatic crowning
Working height: 960 mm
Motor power: 16.5 kW
CE marking
Nljdpfx Ahex N H Hco Uek
Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm
Weight: approx. 14.8 tons
Accessories:
Automatic measurement of the bending angle of the workpiece with automatic correction in the control unit
Side-mounted movable safety guards
LAN network operation
Infrared light barrier at the front and rear
Condition:
Very good condition, only 9,000 operating hours
The seller accepts no liability for typographical or data transmission errors. The machine's visual, technical, and wear condition corresponds to its age; used machines are sold without any warranty.
Clickout
Vilnius
1,813 km
Tipper
Mercedes-Benz814
Mercedes-Benz814
Condition: used, mileage: 481,191 km, power: 97 kW (131.88 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, emission class: euro1, Year of construction: 1993, Engine capacity: 5.958 cc
Empty weight: 4.895 kg
Carrying capacity: 2.595 kg
GVW: 7.490 kg
Technical inspection expiration date: 2026
Auction item.
Dump truck with crane in working condition.
Body lifting in three directions.
The crane has outputs for connecting a grab and a rotor.
Crane HIAB 045-2, year 1992, lifting capacity 2 800 kg., reach 6 meters, maximum lifting height 7.6 meters.
Njdpfxsx N H E Sj Ah Uelk
There is also another gearbox.
Euro standard not written in documents, no Euro standard certificate.
Clickout
Vilnius
1,813 km
Tipper
ScaniaP 124 GB
ScaniaP 124 GB
Condition: used, mileage: 651,275 km, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 6x4, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2004, Empty weight: 13.320 kg
Carrying capacity: 14.680 kg
Njdpfex N H E Ejx Ah Uolk
GVW: 28.000 kg
Auction item.
Tipper truck in working condition.
New tires.
Euro standard not written in documents, no Euro standard certificate.
Clickout
Vilnius
1,813 km
Irrigation equipment
ChallengerRoGator 618S
ChallengerRoGator 618S
Condition: used, Year of construction: 2008, operating hours: 9,000 h, working width: 36,000 mm, Power: 169 kW (230 HP)
Empty weight: 16.880 kg
Volume of the tank: 5000 l
Auction item.
The sprayer has been unused for 4 months.
Nlodpfsx N H Exsx Ah Uok
One of the rear drive gears of the self-propelled sprayer is broken.
Capacity - 5 000 l.
Clickout
Vilnius
1,813 km
Tipper
MAN18.222
MAN18.222
Condition: used, mileage: 480,695 km, power: 162 kW (220.26 HP), fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: mechanical, emission class: euro1, Year of construction: 1995, Engine capacity: 6.871 cc
Empty weight: 7.600 kg
Carrying capacity: 9.400 kg
GVW: 17.000 kg
Nodpex N H Ersfx Ah Uelk
Technical inspection expiration date: 2026
Auction item.
Tipper truck in working condition.
The last photos show a defect, it will be fixed (welded).
Euro standard not written in documents, no Euro standard certificate.


































































































































































































































