WIWOX GmbH Surface Systems

Condition: good (used), Year of construction: 2018, functionality: fully functional, Sandblasting Cabinet Type STK 690 M Chjdpfxjxrzf As Adaed Year: 2018 Technical Data Manufacturer: Made in Europe Model: STK 690 M Year of manufacture: 2018 Volume with floor: 500 L Volume without floor and bridge: 690 L Power consumption extraction unit: 1300 Watts Load capacity: 225 kg Dimensions: approx. L 1.2 x W 1.1 x H 1.8 m Weight: approx. 110 kg Features - 690 L total volume - Integrated extraction system - Internal cabin dimensions: H 600 x W 1170 x D 760 mm - Air requirement: 400 to 700 liters/min, 15-25 cfm - Working pressure: 3.4 to 5.5 bar, 40-80 psi - Max. allowable pressure: 8.5 bar, 125 psi - Extraction capacity: 3.6 m³/min All information subject to change without notice. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 360798, Fratelli Pezza _ Sahara 1000 Special sandblasting, dimensions in the attachments. Cedpfx Ajxrvr Djdaohd The device was disassembled in full working order and has been in storage for over a year. Primarily suitable for blasting sheet-like pieces, but the grid plate can also be used to blast individual parts.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Cedpsxqzmkefx Adaohd Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 75 - 132, overall weight: 250 kg, inner dimension width: 500 mm, inner dimension length: 700 mm, inner dimension height: 500 mm, No reserve price – guaranteed sale to the highest bidder! Chjdpfxjxqnxyj Adaed The machine is being auctioned due to business closure. Submitting a bid obligates timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Internal dimensions (L x W x H): 700 x 500 x 500 mm MACHINE DETAILS Operating voltage: 220 V Dimensions & weight Dimensions (L x W x H): 1,000 x 880 x 1,500 mm Weight: 250 kg

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 9884, overall weight: 500 kg, inner dimension width: 800 mm, inner dimension length: 1,150 mm, inner dimension height: 800 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid requires timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 1,150 x 800 x 800 mm MACHINE DETAILS Electrical data Power: 850 W Chsdpexqnwpofx Adasd Voltage: 230 V Frequency: 50 Hz Maximum air connection: 80 bar Dimensions & weight Dimensions (L x W x H): 1,300 x 1,200 x 1,800 mm Weight: 500 kg

Condition: excellent (used), Year of construction: 2014, For sale is a used Peenmatic 770 S. Basic equipment: - Front swing door with gas strut support, opens to working height, with integrated viewing window, equipped with safety and wear-resistant glass, mounted in a quick-change frame - Side loading doors, width 360 x height 290 mm, left and right, with double slatted curtains - Door end switches - Manual hydraulic height adjustment (maintenance-free) - 2-foot mobile system with built-in rollers, manually lockable - Work grate made of perforated sheet metal, two-piece, removable, hole diameter 5 mm - Padded arm cuffs and gloves, replaceable - Blasting gun unit, type EF 3, with carbide nozzle HSD 5/10, adjustable via pressure reducing valve, 0 - 8 bar, blasting pressure readable on the manometer - Wall-mounted blasting gun holder with swivel arm, height 115 mm, swivel range 275 mm - Blasting media drying system, 50 W, electronically stepless adjustable, including cover for the heating element - Blasting agent pre-acceleration with feed injector unit, adjustable via pressure reducing valve, 0 - 4 bar, feed pressure readable on the manometer - Automatic selective fine particle separation unit, type SHOT SEPARATOR - Built-in high-surface microfilter unit with one filter cartridge, area 1 m². Automatic electro-pneumatic filter cleaning - Steel dust collecting bin Cedpfxsxpvfrj Adashd - Fan for the high-surface microfilter unit, electronically stepless adjustable - Blow-off gun - Foot switch with impulse contact - Compressed air connection, 1/4" G, system side, including oil and water separator - Control panel with all necessary switches and control elements - Key switch, On/Off, with 2 keys - Lighting

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 602709, air demand: 23 m³/h, pressure: 5 bar, total width: 3,900 mm, total height: 5,500 mm, total length: 13,800 mm, inner dimension width: 1,500 mm, inner dimension length: 6,000 mm, inner dimension height: 500 mm, power: 56 kW (76.14 HP), Equipment: documentation/manual, - Max. workpiece width: 1,500 mm - Max. workpiece height: 500 mm - Minimum material thickness: 6 mm - Number of turbines: 4 Cedpfxexnmdvs Adashd - Power per turbine: 11 kW - Total power: 56 kW - Throughput speed: For sheets approx. 1.2-1.5 m/min - Dust content in exhaust air:

Condition: excellent (used), Year of construction: 2008, Blasting house, blasting cabin, sandblasting system Accessible by forklift Consists of two cabins – one for carbon steel and one for stainless material. Chjdpfexmrdrex Adaod Complete with filtration unit and recovery system Inspection is encouraged.

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Cjdpfxsxl Dq Us Adaohd

Condition: used, Year of construction: 2006, machine/vehicle number: 0901-250031, Gietart GW 1500-415 blast machine with driven roller conveyor for 16 m profiles on the infeed and outfeed side Gietart GW 1500-415 continuous blast machine for economical blasting and descaling of sheet metal and profiles with a particularly large opening of 1,600 mm x 1,100 mm for profiles up to 750 mm high as a special version. Cedsxg E Evopfx Adajhd

Condition: used, Year of construction: 2005, Lot consists of: (1) Gum Strip Application Ply Cutter Technical Details: Codjxf Apcepfx Adaehd Please check Sales Brochure for more information.

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch Csdpfx Aoxak Dqjdashd - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: good (used), Sandblasting Unit MHG SMG 45K - Working chamber 1000x600x750 mm - Work gloves - Two side doors, dust-tight sealing - Double-walled, sound-insulated with foam Chjdpfxew Tc Hlj Adaod - On/Off extraction and lighting - Pressure regulator, pressure gauge, and foot switch - Viewing window Dimensions: LxWxH 1.5x1.5x1.8 m / Weight 380 kg Errors and omissions excepted.

Condition: used, Year of construction: 2014, operating hours: 20,600 h, functionality: fully functional, Characteristics of the blasting machine Blasting purpose: Cleaning, deburring Abrasive (material and size): Steel abrasive Abrasive quantity (first filling): 3 t Workpiece material: Steel Workpiece temperature: Ambient temperature Conveying speed: 0.5 – 2.5 m/min Conveying width: 1,000 mm Codpfew Slmrsx Adaohd Conveying height: 500 mm Sound pressure level without noise insulation: > 85 dB(A)

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material Chedpow Rrcwefx Adaed - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter Cedpow Nbycsfx Adaehd The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Condition: new, Year of construction: 2025, Abrasive Media Preparation 1x Sweeping Pit 1x Bucket Elevator 1x Air Separator 1x Electric Vibrating Sieve 1x Abrasive Media Hopper 1x 200l Pressure Blast Unit 1x Blast Hose, Blast Nozzle, Deadman Switch, Control Line 1x Control Cabinet Optional Accessories: - Cross Conveyor Screw over the entire blast room width (also serves as additional buffer storage for several hours of blasting) - Extension for 2 abrasive media types, ferritic and mineral - Drum Magnetic Separator - Final Demagnetizing Stage Cjdpfxjw Ivvco Adashd - Magnetic Drawer

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Cjdpfxow Ivrws Adashd Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Cjdsw Ivrkepfx Adaohd essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Chjdpfx Ajw Ivqmjdasd Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter Cjdpjw Ivk Tefx Adaohd 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: excellent (used), Year of construction: 2013, operating hours: 904 h, functionality: fully functional, machine/vehicle number: 9748295, - Year of manufacture: 2013 - Machine operating hours: 904 h - Exceptionally durable and efficient FlexMati horizontal floor transport system Chjdpow Ihcusfx Adaod - Control cabinet equipped with advanced safety features and operator-friendly software

Condition: used, Year of construction: 2019, machine/vehicle number: F 2019-1300-336, Ref. No. 25243 Technical Data: - Applications: - Demoulding blasting, electrode manufacturing, surface priming; - Surface texturing using rapid tooling technology, cleaning blasting (soft blasting) - Negative pressure cabin with viewing window and motorized tilting hood - Tilting hood motorized up to 90° - Blasting chamber accessible manually via two work gloves - Blasting gun - Turntable made of steel, manually rotatable, 1000 mm Chodswy Ukwspfx Adaed - Internal blasting chamber height: 500 / 840 mm - Internal blasting chamber width & depth: 1100 mm - Abrasive drying system, electronically and steplessly adjustable - Dust extraction unit: Microfilter unit type IMF-2 - Compressed air connection up to 10 bar - Drive: 400 V / 2.9 kW - Space requirements: approx. W 1400 x H 2300 x D 3100 mm - Weight: approx. 900 kg - Separate work platform with stairs: W 1400 x H 1300 x D 1300 mm - Recorded operating hours: 52 h - Operating manual

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm Cedpfxjwx H Ire Adaehd

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Cjdpfx Aewxlygsdaehd