Fidia Macchine Grafiche

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,750 h, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Mast type: Triplex Technical condition: good Sideshift, 3rd valve, 4th valve, heating, full cab, Rsdjx Rpgnopfx Ah Uel

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding of soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers Sanding of blocking foils with graphical control terminal NC-controlled thickness adjustment from 3-150 mm Calibration roller can be switched on via terminal with patented CSD segmented pressure beam to compensate for workpiece tolerances up to 2 mm Sanding width: 1350 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency controlled: approx. 2-18 m/sec Motor power (sanding unit): 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt cleaning air blast: 490 l/min Extraction port: 180 mm Air requirement sanding unit: 1800 m³/h Required air speed: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Rjdpjx Rpghefx Ah Ujl Dimensions (WxDxH): 2090x1670x2020 mm Availability: short notice Location: Röllbach

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Redpfx Aex Rpgbjh Usl The TSRET04 return system from Barbaric is a workpiece return device designed for edge banding machines. It is the most basic model in the TSRET series and performs the following tasks: - Transfers the workpiece at the end of the edge bander - Returns the workpiece to the infeed height of the edge banding machine Functionality: After passing through the edge bander, the workpiece comes onto a roller table. The transfer process occurs as conveyor belts, running perpendicular to the feed direction, emerge from the roller table, lift the workpiece, transport it laterally, and set it down on a slightly lower roller table. This roller table moves the workpiece onto a belt conveyor. At the end of the belt conveyor, there is a non-driven roller track, slightly inclined towards the infeed of the edge bander. A stop at the end of the roller track halts the workpiece. Technical data: - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle rate: max. 11 pieces/min Dimensions: see layout Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg Rodpfx Aox Rpf Rjh Usl The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: - Circular saw power: 2.6 kW - Circular saw speed: 3000 rpm - Max. saw blade diameter: 400 mm - Saw blade bore: 30 mm - Cutting height: 130 mm - Lateral adjustment: 100 mm - Milling motor power: 7.5 kW - Milling spindle speed: 4000 rpm - Max. tool diameter: 400 mm - Milling spindle arbor: 40 mm - Max. tenon length: 140 mm - Stroke height: 120 mm - Lifting spindle with pneumatic single stroke (2 tool positions, limit positions adjustable) - Adjustable saw unit via handwheel for different tenon lengths - Automatic workpiece clamping - Lateral adjustment of the sliding table - Sliding table fence for miters up to 45° - With Festo-LAS length stop Redpfxjx Rpf De Ah Usl Dimensions: 1,650 x 2,470 x 1,450 mm Weight: 680 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Equipment as per order confirmation A2024-???? Redpfx Aex Rpfwsh Ujl

Year of construction: 2012, condition: ready for operation (used), This Bystronic Bysprint Pro 3015 was manufactured in 2012. It features a BYSTRONIC ByLaser 4400 CO2 laser and is equipped with BYSTRONIC ByVision CNC control and a BYSTRONIC Byloader 3015 sheet loader. If you are looking to get high quality cutting capabilities consider the Bystronic Bysprint Pro 3015 machine we have for sale. Contact us for more information. Application Types Cutting Redpfox Rpd Hjx Ah Uel

Year of construction: 2009, operating hours: 36,000 h, condition: ready for operation (used), General Data Measurements width 1500 mm Measurements depth 4800 mm Measurements height 1900 mm Machine weight 2700 kg Additional Equipment Voltage: 400 V With automatic feed Residue bunker Coolant device Redpfjx Rpdyox Ah Uel Mitre cut Loading station, chain magazine with 20 compartments on the infeed side Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides Minimum quantity lubrication including 2x shelfs from Kasto This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: used, Year of construction: 2009, operating hours: 3,312 h, 2009 | Haulotte H15 SX (15m) | Used Scissor Lift | 3312 hours 📍Location: France, Illange 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 35 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Left front stabilizer works after bypassing needs to be repaired , only steers right , broken steering button , engine has underpressure Redpfex Rpdtox Ah Uol 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39711 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Vacuum Truck | 204214 kms 📍Location: France, Boulazac Isle Manoire 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar Redox Rpdmspfx Ah Ujl 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31334 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2013, 5-Axis Machining Center Mori Seiki NMV 1500 DCG HSC Year of manufacture: 2013 X-axis travel range: 420mm (longitudinal movement of spindle head) Y-axis travel range: 210mm (cross movement of slide) Z-axis travel range: 400mm (vertical movement of spindle head) Distance from table surface to spindle nose: 100 - 500mm (horizontal table position) B-axis travel range: +160° to -180° C-axis rotation range: 360° Machine table dimensions: 250mm, max. workpiece weight: 50kg Spindle: Torque boost spindle 7.5/5.5kW (max. 12,000 rpm) Tool changer: Chain-type tool magazine with 61 slots (HSK-A40) Tool holder: HSK-A40 interface, including corresponding modifications to the tool magazine, with a 61-slot capacity Chip conveyor Direct position measurement system for feedback to the CNC, for maximum positioning accuracy in X, Y, and Z axes Mobile control unit for axis movement, portable operator panel with axis selection switch, speed resolution selector, handwheel, and emergency stop Machine operated with cutting oil and equipped with a Kraft & Bauer fire extinguishing system Control options: - Expansion of part program memory to 512 kB, with up to 1,000 storable part programs - Increase of memory capacity to 512 kB for larger part programs and storage of up to 1,000 part programs - Multiple optional program line skipping - 8-digit part program numbers - Expansion of part program numbers to 8 digits (instead of standard 4 digits) - Increase in the number of user macro variables to 600 - Additional 400 global user macro variables (#600–989) versus the standard (#100–188 and #500–539) - Interrupt-driven user macro function: allows interruption of the running program sequence via machine-side interrupt signal (e.g., on overload detection) to immediately execute a programmed user macro, then continue the part program at the original point - Optional line skipping (2 blocks, selectable via softkey) Rjdex Rpcvjpfx Ah Ujl - Selective block skip function for individual, preselected program blocks during part program operation (total of 9 blocks, individually selectable with softkeys) - Command for inclined working surface - Fast Data Server incl. memory card - DS A1212 external M-codes (8x2) The machine is still in operation and can be inspected under power by prior arrangement in the Saarbrücken area. Technical data, accessories, and description are given without obligation. Sale is ex works without warranty or guarantee. The buyer is responsible for transport. Upon request, we are happy to assist with transport. Payment is due 100% in advance prior to shipping. Subject to prior sale.

Condition: used, axle configuration: 3 axles, first registration: 03/2014, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,960 mm, color: red, Year of construction: 2014, General information Model code: ### Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 7.315 kg Carrying capacity: 33.685 kg GVW: 41.000 kg History Number of owners: 1 Condition General condition: average Technical condition: moderate Visual appearance: average Rsdpfxox Rpcio Ah Uol Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 3 axles, first registration: 11/2014, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,960 mm, color: red, Year of construction: 2014, General information Model code: ## Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: VALX Brakes: drum brakes Suspension: air suspension Rjdpfxsx Rpccs Ah Uol Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 7.410 kg Carrying capacity: 33.590 kg GVW: 41.000 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), mileage: 1,267,458 km, power: 152 kW (206.66 HP), first registration: 12/2013, fuel type: diesel, tire size: 285 / 70 / R19.5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,170 mm, total width: 2,590 mm, total height: 3,850 mm, loading space length: 6,810 mm, loading space width: 2,500 mm, loading space height: 2,510 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, Technical information Number of cylinders: 4 Engine capacity: 4.462 cc Transmission Transmission: ZF, 6 gears, Automatic Axle configuration Tyre size: 285 / 70 / R19.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 6000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 9592 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.400 kg Carrying capacity: 4.590 kg GVW: 11.990 kg Functional Tail lift: Dhollandia DHSM.20, slider lift, 1500 kg Make of bodywork: Carrosserie Harderwijk Geïsoleerde Frigo Box Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters) Rsdex Rpb Sopfx Ah Ujl Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 3 axles, first registration: 07/2006, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 235 / 75 / R17.5, wheelbase: 9,120 mm, color: blue, Year of construction: 2006, Axle configuration Tyre size: 235 / 75 / R17.5 Make axles: BPW Eco Rsdpjx Rpb Eofx Ah Uel Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 75%; Tyre profile left outer: 75%; Tyre profile right outer: 75%; Tyre profile right outer: 75% Rear axle 2: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 75%; Tyre profile left outer: 75%; Tyre profile right outer: 75%; Tyre profile right outer: 75% Rear axle 3: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 75%; Tyre profile left outer: 75%; Tyre profile right outer: 75%; Tyre profile right outer: 75% Weights Empty weight: 9.040 kg Carrying capacity: 31.960 kg GVW: 41.000 kg Condition Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 2016, Used 5-axis universal machining center Year of manufacture: 2016 Working area: X travel: 762 mm Y travel: 508 mm Z travel: 508 mm Spindle nose to table (max): 610 mm Spindle nose to table (min): 102 mm Table / Load capacity: Platter diameter: 500 mm Rodox Rpbxepfx Ah Uol Max. table load: 300 kg 7 T-slots, 63 mm spacing Spindle: Taper: CT40 Max. speed: 12,000 rpm Max. rated power: 22.4 kW (30 hp) Inline direct-drive, liquid cooled 5-axis function: B-axis (tilt): +120° to -35° C-axis (rotation): 360° Tool changer: SMTC, 40+1 positions Tool change time: approx. 1.8 s (tool-to-tool) Through-spindle coolant 21 bar Chip conveyor Renishaw measuring system Feeds: Rapid traverse: up to 30.5 m/min on all axes Max. cutting feed rate: approx. 21.2 m/min General: Coolant tank: 208 l Air requirement: approx. 113 l/min at 6.9 bar Weight approx. 6,460 kg Machine can be inspected near Heilbronn by appointment. Loading available. Buyer is responsible for transport. Technical data, accessories, and machine description are non-binding.

Year of construction: 2006, condition: excellent (used), Spare parts from model year 2006 onwards Rjdpfx Ajx Rpbreh Uol

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Used 3-axis CNC machining center Cincinnati Model: CFV-800i Year of manufacture: 2011 Redpfxox Rpble Ah Uel Spindle: 10,000 rpm Control: Siemens Travel: X 800 Y 510 Z 510 mm Tool magazine: 21 positions Tool holder: SK40 Dimensions (approx.): 2260 mm x 3480 mm x 2600 mm Weight (approx.): 5500 kg The machine can be inspected by appointment near Bielefeld. Loading can be provided. Transport to be arranged by the buyer. Technical data, accessories, and machine description are non-binding.

Year of construction: 2008, condition: excellent (used), Spare parts from 2008 onwards Redpjx Rpbfofx Ah Ujl

Year of construction: 2004, condition: excellent (used), Spare parts As new From year of manufacture 2004 onwards Rsdpfsx Rpa Uox Ah Uel

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Haas SL-20THE with live tooling Machine is inspected Rsdpjx Rpazofx Ah Usl Year of manufacture: 2005 Swing diameter over bed: 762 mm Turning specifications: - Turning length: 508.0 mm - Turning diameter: 261.6 mm - Diameter over bed: 584.2 mm - Diameter over cross slide: 241.3 mm - Distance between centers: 609.6 mm Axis travel: - X-axis travel: 214.6 mm - Z-axis travel: 508.0 mm Spindle details: - Spindle bore: 76.2 mm - Spindle speed: 4000 RPM - Spindle motor power: 14.9 kW Tooling: - Number of turrets: 1 - Number of tools on turret: 10 - Number of live tools: 10 Measuring arm Chip conveyor 3-jaw power chuck Dimensions: - Length: 3149.6 mm - Width: 1574.8 mm - Height: 1828.8 mm - Weight: 4083.5 kg The machine can be inspected by appointment in Hanover. Buyer responsible for transport. Technical specifications, accessories, and description of the machine are non-binding.

Year of construction: 2018, condition: used, functionality: fully functional, For Sale: SCREEN PlateRite 4600S – 2018 I am offering a SCREEN PlateRite 4600S CTP system from 2018, fully operational, well‑maintained, and in very good technical condition. A reliable and efficient solution for printing companies looking to upgrade their prepress workflow. Technical Specifications - Year of manufacture: 2018 - Productivity: up to 21 plates per hour - Laser head: 32‑diode - Total plates imaged: 141,000 - Processor: Glunz & Jensen TIGER 85T - Stacker: plate stacker included - RIP: FUJIFILM XMF - PC server included Rsdsx Rpauspfx Ah Uol Condition & Availability The machine is in very good working condition and has been in continuous production. Available from February 1st, 2026.

Condition: excellent (used), Year of construction: 2017, Heidenhain TNC 620 control Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed: 12,000 rpm Rotary and tilting table Tool magazine for 20 tools, ISO 30 Rodsx Rpahjpfx Ah Uel Chip conveyor LANG automation

Condition: good (used), Year of construction: 1963, Table size: 1250x1100 mm Spindle diameter: 90 mm Tool holder: SK40 Rsdpjx Rn U Rsfx Ah Uol Spindle speed: 9-1000 rpm

Condition: not inspected (used), Year of construction: 2003, functionality: fully functional, Heavy-duty Stratoplan planer with 6 spindles. Year of manufacture: 2003 Feed rate: 30 m/min to max. 300 m/min. Spindles: U/T/R/L/U/T Working height: 17 mm to max. 120 mm. Working width: 50 mm to max. 300 mm. Supplied with infeed table (accelerator) and cross conveyor. 6 sets of tools. Table height: 1,100 mm Working width: 50-300 mm Working height: 17-120 mm Feed rate: 30-300 m/min Control system: Siemens S7 Connected load: 390 kW Rjdpfx Asx Rn U Djh Uol