P.p.h. Hen-Stol. Hanna Piórkowska Sp.j.

Condition: good (used), Year of construction: 1978, Table dimensions 2.900 x 1.400 mm throat rechts 1.100 x 150 mm motor power 7,5 kw sanding belt measurements 7.800 x 150 mm 320 mm 2.500 mm Working width 1.100 mm Fsde Ai Ufkjpfx Aanepp Dust suction hood 180 mm

Condition: good (used), Year of construction: 2022, 0,4 - 3 mm Workingpiece thickness from to 10 - 45 mm Total length ca. 2.800 mm Feed speed 8 m/min. Fpods Ai Ufgepfx Aanep total power requirement ca. 7,1 kw

Condition: good (used), first registration: 03/2017, Year of manufacture: 2017 Unladen weight: 7,640 kg Fpedpfx Aj Ai Ufcsanjp Payload: 31,360 kg GVWR: 39,000 kg Tipping body: Rear APK (Technical Main Inspection): valid until 04/2027 Technical condition: good Optical condition: good Vehicle number: Semi-trailer - Tipper. 31 Kloos / Steel / Lift axle / 3 axles / 50m³ .: W09SKF335HWKC0010 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 7,640 kg 3 axles Lift axle Steel 50m³ No liability for printing and typographical errors, changes, prior sale, and errors. = Company information = No liability for printing and typographical errors, changes, prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: excellent (used), mileage: 152,685 km, power: 88 kW (119.65 HP), first registration: 10/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: AdBlue, Despite our diligence in ensuring the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = General Information Year of construction: 2014 Technical Information Engine displacement: 1,968 cc Front axle: Steered Fpsdpfxj Ai Ud Re Aanjp Rear axle: Double-tired Weights Unladen weight: 2,835 kg Payload: 2,165 kg GVWR: 5,000 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.

Condition: good (used), Year of construction: 1997, sheet width - max. 2035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control FM 5 total power requirement 5.5 kW weight of the machine ca. 4600 kg range L-W-H 2426 x 2124 x 1606 mm From a chamber of crafts/trades (vocational training center) In good condition (!!) Fedpfs Ai Ud Hjx Aanopp Equipment: - Robust NC electro-hydraulic guillotine shear - FASTI NC touch control system "FM 5" * Pivoting control panel (front left) - NC motorized backgauge - Electro-hydraulic cutting angle adjustment - Electro-hydraulic blade gap adjustment - 1x side gauge with scale - 1x front support arm - Support table with recessed grips - 1x mobile foot switch - Rear safety guard (protective fencing) - Original operating manual * Special accessories included: - Sheet metal support/lifting device for cutting thin sheet metal

Condition: good (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 5.500 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm From a maintenance workshop In good condition (!!) Fpodpfx Aao Ai Ud Ajnsp Equipment: - Electro-hydraulic "swing-cut" sheet metal shear - Machine frame: all-steel welded construction - ELGO NC control (model P8721), control panel located on the front left * For positioning the motorized backgauge * Allows for input of target/actual position values * Adjustment via three-phase motor and toothed belt - Support table equipped with ball transfers * Recessed grips integrated between the table plates - Front finger guard - Hydraulic sheet hold-downs - 1x extra-long side gauge with mm scale * 3.000 mm length, includes support leg - 1x front support arm with mm scale - 1x mobile foot switch - Spare blades - Rear safety enclosure (protective fencing) - Front-mounted emergency stop button - Original operating manual and circuit diagram Special accessories included: - EHT pneumatic sheet support device (for cutting thin sheet metal)

Condition: used, Year of construction: 1991, pressure 60 t passage width 1000 mm stroke 600 mm table-size 990x400 mm Fodpfj Ai Udxsx Aanepp table height over floor 600-900 mm working pressure 300 bar oil volume 60 l total power requirement 1 x 5,5 / 1 x 7,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1250 x 1000 x 2450 mm Features: - Two-hand operation - Emergency stop - Depth adjustment via limit switches - Pressure preselection - Work table with 3 T-slots - Rear protective screen with mesh - Work area light - Machine feet

Condition: used, Year of construction: 2007, Punching capacity 165 kN working area 2175 x 1250 mm laser capacity in Watt 100 - 2000 plate thickness 4 mm control Bosch PNC-P 18 Stück weight of the machine ca. 13.900 kg dimensions 6800 x 6600 x 2400 mm Standard Equipment: - Sturdy C-frame - Coordinate guide with integrated linear magazine, Fpjdpfx As Ai Udusanjp 21 slots for tools and clamping jaws - 2 clamping jaws - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for repositioning - Brush tables - Workpiece flap 300 x 500 mm for laser station - 1 bin for good parts - Laser unit: High-frequency-excited CO2 laser TruCoax 2000, vibration-isolated, integrated into the machine frame, incl. cooling unit and TASC 3 laser control - FocusLine - NitroLine high-pressure cutting - High-speed processing with SprintLine - Programmable cutting gas pressure adjustment - Laser cutting head: 7.5" lens, quick-change mechanism, ControlLine distance control - Punching head: hydraulic mono-tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, second lubricant reservoir, punching scrap extraction, chip bucket - Bosch PNC-P control system, 15" TFT color touchscreen, easy operation, online help, diagnostic functions, maintenance log, technology data, job tables, teleservice, 3.5" floppy disk drive, USB flash drive interface, RJ45 network connection - Safety: multi-beam photoelectric sensors, emergency shutdown for hydraulics, extraction system, and compact dust collector, protective device against scattered radiation at the cutting head - Network connection via installation by Teleservice Advanced Features: - MultiTool function - MultiBend function - Signing/rapid beading function - Adaptive stroke calibration - Die spray lubrication - 1 additional clamping jaw - Adjustable-height repositioning cylinder - Sensor for part chute - Vibration-dampened mounting - MDE integrated machine data acquisition - Sheet-friendly die ball - MDE interface - SheetMaster preparation Operating hours: Machine ON: 54,698 h Laser ON: 55,959 h Beam ON: 5,535 h (As of September 2025)

Condition: used, Year of construction: 2007, pressure 85 t chamfer lenght 2720 mm column daylight 2260 mm stroke 445 mm X-axis travel 600 mm 445 mm R-axis travel 250 mm useable dayligth 385 mm control TASC 6000 weight of the machine ca. 8600 kg dimensions 3620 x 1740 x 2835 mm Features: - Pressure beam with high flexural strength - Spherical mounting of the pressure beam with pressure beam tilt - Electrohydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable dual pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Wedge crowning integrated into the table, manual - Upper die clamping system “New Standard Clamping,” manual, hardened, self-centering, for vertical die change - Lower die clamping system with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers with secure adjustment from the front - Machine control: TRUMPF TASC 6000 - Control panel with LCD keypad, foot switch for emergency start and emergency stop - Safety features: integrated side doors and automatic rear roll-up cover - Control cabinet cooling (air-to-air heat exchanger) - Oil cooler - Network-ready - Modern machine design Advanced machine features - Increased installation height/stroke: +230 mm Fsdpe Ai Udqefx Aanjpp - BendMaster preparation - 4-axis backgauge system - Hydraulic upper die clamping - CNC crowning - CNC lower die shift - BendGuard - Foot switch - ACB preparation - Rear work area lighting - Front work area lighting Operating hours: 87,934 h (as of November 2025)

Condition: used, Year of construction: 1993, max. paper size 36 x 52 cm max. printing speed sheets 8000 /h dampening system Varn Kompac Fsdpo Ai Udmjfx Aanopp numbering unit include

Condition: used, Year of construction: 2006, impressions 44 Mio. Fpodpfx Ao Ai Udioanep max. printing speed sheets 13000 /h max. paper size 37 x 52 cm dampening system Alcolor plate clamping system Easyplate

Condition: used, Year of construction: 1985, max. printing speed sheets 8000 /h max. paper size 32 x 46 cm dampening system Standard numbering unit yes dampening system Varn Kompac Fpedpfx As Ai Udfjanop

Condition: used, Year of construction: 1997, impressions 42 Mio. max. printing speed sheets 15000 /h Fpodpfx Ao Ai Udbsansp max. paper size 37 x 52 cm plate clamping system Autoplate dampening system Alcolor automatic blanket wash-up device optonal serial no. 201.207

Condition: new, Year of construction: 2004, cutting width 66 cm feeding depth 66 cm feeding high max. 8 cm Fjdpfx Aas Ai Uc Tonspp

Condition: used, Year of construction: 2017, max. plate size 676 x 530 mm min. plate size 240x240 cm impressions only 10.000 exposed plates Fpodpfxs Ai Uc Ne Aanjp max. speed plates 21 /h Incl. Rip + Software

Condition: used, empty load weight: 6,270 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 05/2027, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 179,144 km, Ref: F0847123 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pole + 2 x 7-pole, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarpaulin, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 32 VIN: WKESD00000847123 Tire dimension: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Fpjdps Ai Uchefx Aansp Height: 4.04m Internal height: 2.79m

Condition: used, empty load weight: 6,370 kg, axle configuration: 3 axles, first registration: 09/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 154,218 km, ref: F0845687 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, Fjdpfx Aae Ai Uclenopp * Lifting odometer, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding cover, * Side sliding tarp, * Multilock, * Floor: Plywood floor, * Recessed strip (aluminum): 28 VIN: WKESD00000845687 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.04m Internal height: 2.79m

Condition: used, empty load weight: 8,418 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 02/2027, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2019, mileage: 546,252 km, ref: 55575 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting mechanism odometer, * Tool box: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210867 Tire size: 385/65 R22.5 Width: 2.6m Fpodpfj Ai Ucpex Aanep Height: 4m

Condition: used, empty load weight: 8,418 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 03/2027, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2019, mileage: 207,861 km, ref: W0015558 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, Fedpfx Ae Ai Uctoanjpp * Cooling unit, * Side impact protection, * Lifting mechanism odometer, * Toolbox: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210872 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: used, empty load weight: 6,270 kg, axle configuration: 3 axles, first registration: 08/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 197,196 km, ref: F0847122 Equipment: * Air connection: Red/Yellow connector, * Power connection: 1 x 15-pin + 2 x 7-pin, Fpsdpfxj Ai Ucws Aanep * ABS, * EBS, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarpaulin, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion bar (aluminum): 30 VIN: WKESD00000847122 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.04m Internal height: 2.79m

Condition: used, empty load weight: 6,270 kg, axle configuration: 3 axles, first registration: 06/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 143,808 km, ref: F0832750 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin + 2 x 7-pin, Fpodpfxe Ai Uczj Aanjp * ABS, * EBS, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion strips (aluminum): 28 VIN: WKESD00000832750 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.04m Internal height: 2.79m

Condition: used, empty load weight: 8,418 kg, axle configuration: 3 axles, first registration: 02/2019, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2019, mileage: 233,617 km, ref: W0015560 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, Fpjdpfx Aae Ai Uc Eenep * Lifting odometer, * Tool box: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210875 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: good (used), Sheet metal cassette storage system for sheet metal sizes up to 1,500 × 3,000 mm. Robust sheet metal rack with 20 removable cassettes. Fpjdpfx Aj Ai Ucdeanep Price ex works: €11,350 (net), disassembled. Technical specifications: Sheet metal cassette storage system / sheet metal rack Suitable for: Sheet metal sizes up to approx. 1,500 × 3,000 mm Number of cassettes: 20 Cassette dimensions: approx. 3,020 × 1,630 × 160 mm per cassette Overall dimensions: approx. 3,900 × 5,117 × 1,815 mm (W × H × D) Total weight: approx. 6,629.9 kg Material / construction: Steel construction, including S235JR, bolted assemblies Color: blue Condition: good Available: by arrangement Location: Luxembourg

Condition: excellent (used), Year of construction: 2024, x-travel 750 mm y-travel 600 mm z-travel 520 mm B-axis (table) - 10°/+95° Grad c-axis 360° Grad table surface area Ø 800 x 620 mm control Heidenhain TNC 620 spindle turning speed - stepless 20 - 15.000 U/min power capacity - milling spindle 20 / 14,5 kW max. torque on the milling spindle 121 / 84 Nm rapid traverse 30 m/min tool change unit 60 Werkzeuge tool taper SK40 table load 350 max. kg total power requirement 35 kVA weight of the machine ca. 11 t dimensions of the machine ca. 6,5 x 4,5x 3,0 m Five-sided machining center with ROBO2GO Milling robot in excellent condition. The ideal machine for minimally staffed shifts, right down to single-part production! (Can also be used as a stand-alone machine) The machine has only 2,850 spindle hours and is equipped as follows: * Heidenhain TNC 620 3D control with 19" screen * electronic handwheel * direct position measurement system (X, Y, Z) * Universal milling head with controlled B-axis * SK40 motor spindle, 15,000 rpm, 20 kW * Tool magazine (carousel), 60 positions * HEIDENHAIN TS 460 touch probe for workpiece measurement with optical signal transmission * Tool measurement in the work area: Blum Laser NT-Hybrid * BLUM laser probe for measuring tool length and diameter * Pneumatic control system for the clamping device, mounted on the machine table * SCHUNK KSP plus 160 pneumatic vise * Blowing air can be activated through the center of the spindle * Electronic handwheel * through the spindle coolant (40 bar) with paper-tape filter system * Chip conveyor Fpjdpfs Ai Ucaex Aanjp _____ * Flexible workpiece loading and unloading system with a 6-axis industrial robot - Interchangeable workpiece magazine, including workpiece trays - Max. 42 parts up to 100 x 100 mm - Max. 9 parts up to 200 x 200 mm - Max. tray load: 700 kg - Max. robot payload: 25 kg * 2-jaw gripper for rectangular workpieces - Gripping range with jaw adjustment system: 20–195 mm - Min. workpiece height: 20 mm - Gripper stroke: 6 mm per jaw * Drawer storage: - For increased capacity and loading/unloading of workpieces during active production time Includes 15 touchscreen - Each drawer can be loaded with different jobs via the software - Number of drawers: 3 (+ 2 optional) - Max. workpiece height with 3 drawers: 250 mm - Max. workpiece height with 5 drawers: 100 mm - Max. load per drawer: 300 kg - Includes safety fence with light curtain - Inlay for up to 22 parts, up to 100 x 100 mm, for drawer storage The machine can be inspected under power!

Condition: good (used), Sheet metal cassette storage system for sheet metal formats up to 1,500 × 3,000 mm Fpjdpfo Ai Ub Ssx Aanop Robust cassette storage system with 40 removable cassettes Price ex works: €21,750 (net), disassembled. Manufacturer: Seller's own production Technical specifications: Sheet metal cassette storage system / Sheet metal rack Suitable for: Sheet metal formats up to approx. 1,500 × 3,000 mm Number of cassettes: 40 units Cassette dimensions: approx. 3,020 × 1,630 × 160 mm per cassette Load capacity: at least 2,000 kg per cassette according to the design drawing Overall dimensions: approx. 7,200 × 5,117 × 1,815 mm (L × H × D) Total weight: approx. 12,458.5 kg Sales and delivery notes • Sold in used condition and as inspected. • Disassembly will be carried out by the seller. Securing the load and transport are the responsibility of the buyer. • Before disassembly and re-commissioning, the buyer must check the anchoring, installation area and local safety regulations. • Technical documentation (statics, bill of materials and design drawing) can be provided as part of the sales process. • Subject to prior sale and errors Material / Construction: Steel structure, including S235JR, bolted assemblies Color: blue Condition: good Available: by arrangement Location: Luxembourg