Tms

Condition: good (used), Year of construction: 2013, operating hours: 71,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503728 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2013 operation hours: 71000 h technical data clamping unit clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm ejector stroke: 175 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 760 kg technical data injection unit screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 150 mm screw torque: 380 N plasticising rate: 20 g/s PS injection rate into the open: 113 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x Lodpfx Aoz Eaumenxoag machine incl. Handling Anti vibration mounts mould heating 6x technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift 6 kg year of construction: 2013

Condition: good (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 2,000 bar, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503729 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2012 clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar equipment included incl. Spruepicker screen text german Lajdpfx Ajz Eahasnxeg CEE-socket 16A core pulling hydraulically 1x Anti vibration mounts mould heating 6x handling type: Linear manufacture: ARBURG controller: INTEGRAL PICKER year of construction: 2012 measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, displacement volume: 510 cm³, mold height (min.): 300 mm, ejector force: 80,000 N, ejector stroke: 180 mm, total length: 6,200 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 12,900 kg, Clamping force: 180t Year of manufacture: 2014 Injection unit 1050 Screw diameter: 55 mm Specific injection pressure: 1615 bar Lsdpfx Asz Eacwenxoag Injection volume: 510 ccm Pump motor power: 30 kW Cylinder heating band power: 16.3 kW Tool closing unit 1800 Clamping force: 180 t Tool plate dimensions: 880 x 830 mm Ejector force: 80 kN Ejector stroke: 180 mm Tool height: from 300 mm Opening stroke: 750 mm Maximum platen distance: 1050 mm Weight: 12900 kg Dimensions (m) L x W x H: 6.2 x 1.8 x 2.2 m Technical data: - Clamping force 1,800 kN (180 t) - Injection unit 1050, screw diameter 55 mm - Max. injection volume 510 cm³ - Injection pressure 1,615 bar, holding pressure up to 2,050 bar - Injection rate 255 cm³/s - Metering stroke 215 mm, max. screw speed 230 rpm - Opening stroke 750 mm, min. mold height 300 mm - Max. platen distance 1,050 mm - Mounting plates 880 x 830 mm - Max. mold weight 2,250 kg - Ejector: stroke 180 mm, force 80 kN - 6 mold cooling circuits at 10 l/min - Dry cycle time 2.0 s at 250 mm - Oil tank 540 l - Machine weight 12.9 t, dimensions 6.2 x 1.8 x 2.2 m

Condition: good (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,600 bar, total length: 4,000 mm, total width: 1,300 mm, total height: 1,900 mm, overall weight: 4,400 kg, warehouse no.: 503730 manufacturer: ENGEL type: e-max 310-100 Ledpfez Eabtox Anxsag controller: LC 200 A01 year of construction: 2011 clamping force: 1000 kN distance between tie-bars h x v: 460 x 410 mm size of mould plates h x v: 650 x 600 mm min. mould height: 150 mm max. mould height: 450 mm max. open daylight: 800 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 135 ccm injection pressure: 1600 bar equipment included incl. Spruepicker screen text german core pulling hydraulically 1x Anti vibration mounts mould heating 8x handling type: Angussentnahmegerät manufacture: ENGEL controller: ER-USP 5 year of construction: 2011 measures of machine l x w x h: 4m x 1.3m x 1.9m total weight: 4400KG

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Frequency converter Hidrive drive 4 x pneumatic valve Laedpfx Aoz D U Tnjnxog

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Nozzle penetration depth: 40 mm Lasdsz D U Skopfx Anxsg Nozzle contact force: 60 kN Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Noise level (idle / full load): 56 / 71 dB(A)

Condition: used, Year of construction: 1998, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Lasdpez D U Rmefx Anxog Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: good (used), Year of construction: 2011, operating hours: 78,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, injection pressure: 1,615 bar, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 12,200 kg, warehouse no.: 503731 manufacturer: ENGEL type: Victory 1050-220 spex controller: CC 200 A02 year of construction: 2011 operation hours: 78000 h clamping force: 2200 kN size of mould plates h x v: 880 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm injection volume: 510 ccm Spritzdruck: 1615 bar equipment included: screen text german core pulling hydraulically 2x machine incl. Handling Anti vibration mounts mould heating 8x technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 Lsdoz D U Ilopfx Anxsag measures of machine l x w x h: 5.7m x 1.7m x 2.2m total weight: 12200KG

Condition: used, Year of construction: 2000, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (610) Laedpfx Anjz D U Hbexog Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1598 bar Stroke volume: 399 cm³ Shot weight (PS): 360 g Max. dosing stroke: 203 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm Lajdpfxoz D U D Te Anxsg L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Lodpfxjz D Uyus Anxoag Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A) Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Lodsz D Uv Njpfx Anxjag Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Ledpfxoz D Utho Anxoag Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Ljdpfsz D Utbsx Anxeag Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2001, Clamping force: 420 t Lodpfx Asz D T Iksnxsag Screw diameter: 60 mm Type: Multicomponent Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2002, clamping force: 2,000 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg Allrounder 570 C 2000-675 features a clamping force of 2,000 kN and a maximum mold height of 950 mm. It includes a screw diameter of 50 mm and a maximum injection volume of 353 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 570 C 2000-675 machine we have for sale. Contact us for further details. • Space between columns: 570 x 570 mm • Maximum mold height: 950 mm • Minimum mold height: 300 mm • Maximum injection volume: 353 cm³ • Maximum injection pressure: 2,080 bar • Centering ring: 125 mm • Hot runners in the machine: 9 • Core pullers: 1 Lasdpfjz D T Dlex Anxog • Pneumatic valves: 1 Additional equipment • Wittmann W821 robot (year 2018)

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Laedpfx Anoz D Ttgjxeg Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg Lsdpfoz D Tnqox Anxjag HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: ready for operation (used), Year of construction: 2004, clamping force: 1,600 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine. • Space between columns: 520 x 520 mm • Maximum mold height: 585 mm • Minimum mold height: 275 mm • Maximum injection volume: 259 cm³ • Maximum injection pressure: 1,600 bar • Centering ring: 160 mm • Hot runners in the machine: 8 • Core puller: 1 • Pneumatic valves: 2 • Programmable inputs: 2 Additional equipment Lsdpfxez Dvd Ie Anxoag • Robot: Wittmann W818 (MY: 2015)

Condition: good (used), Year of construction: 2007, operating hours: 63,868 h, functionality: fully functional, machine/vehicle number: 413089, clamping force: 500 kN, screw diameter: 30 mm, overall weight: 3,400 kg, We are selling a fully functional EE50. It is connected to the power grid and can be inspected at any time. Accessories: Handling interface EM67. Lsdjz Dq N Sjpfx Anxeag

Condition: ready for operation (used), Year of construction: 2002, clamping force: 1,000 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg 420 C 1000-150/60 features a clamping force of 1,000 kN and a maximum mold height of 750 mm. It includes a screw diameter of 25/22 mm and a maximum injection volume of 54/30 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 420 C 1000-150/60 machine we have for sale. Contact us for further details. • Space between columns: 420 x 420 mm Ledpfx Anoz Dk Sgsxjag • Maximum mold height: 750 mm • Minimum mold height: 350 mm • Screw diameter: 25/22 mm • Maximum injection volume: 54/30 cm3 • Maximum injection pressure: 2500/2340 Bar • Centering ring: 125 mm • Hot runners in the machine: 2 • Core puller: 1

Condition: ready for operation (used), Year of construction: 2016, clamping force: 1,100 kN, screw diameter: 22 mm, Hydraulic injection moulding machine manufactured in 2016. This Krauss Maffei 110-180-180 CX V features a clamping force of 1,100 kN and a minimum mold height of 377 mm. It includes a screw diameter of 22 mm and a centering ring of 125 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 110-180-180 CX V machine we have for sale. Contact us for further details. • Space between columns: 530 x 470 mm • Minimum mold height: 377 mm • Centering ring: 125 mm Ledpfx Asz Dk Rvenxjag • Core pullers: 3 • Pneumatic valves: 2 • Programmable inputs: 3

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence Lsdpfxoz Dibme Anxoag

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Laedez Dhnrjpfx Anxeg Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,265 h, clamping force: 1,600 kN, screw diameter: 35 mm, overall weight: 8,700 kg, controller manufacturer: ENGEL, controller model: CC200, Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details. • Injection unit: 500 • L/D ratio: 20 • Hydraulics: ECODRIVE SHV1 (high-dynamic servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 102 kW • Clamping system: Patented tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector: Central ejector • Hydraulic core pulls: 2 on moving platen • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 8 control zones • Cylinder/screw execution: M3 abrasion/corrosion-resistant cylinder (up to 350 °C), hardened screw S8 (Ø 35 mm, L/D 20), non-return valve R9b • Open nozzle: Flange thread M28 x 1.5, radius 15 mm, bore 4 mm • Mold temperature control: Flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits) • Hydraulic tank capacity: Main approx. 330 l; suction approx. 130 l • Interfaces: Coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2 • Languages: Czech and German Lajdpfx Asz Dgvzjnxog