Nardo Machines

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Gedpfx Asy Sbu Hsgpjit Shear GX630 Discharge conveyor + hold-up system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear is equipped with a discharge conveyor, hold-up system, and scrap bin combined in one unit. Behind this, an original Amada discharge conveyor with material stacker has been installed. The system is frequency-controlled. The machine is in very good condition and was exclusively used for thin material. All documentation is available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic blade gap adjustment Backgauge: 1000 mm Hold-up system: pneumatic Length x width x height: 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: good (used), functionality: fully functional, Year of construction: 2020, Hydraulic Guillotine Shear Make: Fasti Type: 530 – 3000 x 6mm Year: 2020 Technical Specifications Manufacturer Schröder Model 530 - 30/6 Year of Manufacture 2020 Sheet Width 3040 mm Sheet Thickness 6.00 mm (400 N/mm²) Blade Gap Adjustment 0.5 – 1.8 mm Strokes per Minute 24-61 spm Drive Power 12.0 kW Space Requirement (LxWxH) Approx. 4.00 x 3.00 x 1.96 m Weight Approx. 6.5 t Equipment/Features - 12” touchscreen controller PSC 150 on swiveling panel - Energy-efficient drive for frequency-controlled motor and pump - Automatic blade gap adjustment Giedpfxoy R Dcws Agpet - Adjustable hold-down pressure selectable via the control system - Motorized backgauge 10–1000 mm with ball screw spindles - Pneumatic sheet holding device - LED cutting edge illumination - Programmable start and end position for the blade beam - Angle stop mounted on the left incl. electronic length measurement system, fine adjustment, and lateral flip stop with linear guide, 1000 mm - 2 backgauge arms with ball rollers, adjustable on linear guides - Table support made of stainless steel sheets with ball rollers - Rear area secured with light barrier - Scrap and small parts chute to the front incl. "Return to Sender" function - Movable table extension mounted on guide rail - Finger guard, can be raised approx. 1500 mm, incl. electrical safeguarding All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop Giodey Rm Ivspfx Agpet - Roll shelf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, controller manufacturer: Siemens, ORBIBEND, the mobile orbital cutting system, surpasses standard planetary cutters and marks a new step in the evolution of tube bending machines. (Simat Patent). A MOBILE ORBITAL CUTTING unit capable of grooving the tube (Simat Patent): End-of-curve cutting: tube cutting at the curve's end, eliminating the need for subsequent trimmings on short ends. On-the-fly pre-scoring: the groove is made in the “shadow” during the bending phase, saving cycle time. Rotary draw bending Stretch bending Gjdpfoy Rky Asx Agpsit Multi-radius bending in process Right- and left-hand bending in process ORBIBEND can be paired with a tube former from the MACH series; this allows you not only to bend and cut but also to shape, reduce, flange, bead, end-form, and roll tube ends. Additionally, the machines can be interfaced with a robot for operations on both ends of the tube.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 65530, table height: 900 mm, back gauge: 750 mm, overall weight: 4,800 kg, total length: 3,510 mm, total width: 1,850 mm, total height: 2,030 mm, Equipment: type plate available, Max. cutting capacity at 45/70 kp/mm²: 6/4 Max. pressure: 200 bar Cutting angle adjustment: 0.5 - 3 degrees Strokes at cutting angle: 13/22 max./min Number of hold-downs: 18 pcs. Main motor: 7.5 kW Gedpfx Agey Rh Idepsit Cutting length: 3050 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm max. cutting width: 3080 mm machine weight: 5600 kg Gjdpfx Agoy Nw U Rspoit Very good, ready-to-use condition.

Condition: good (used), functionality: fully functional, Year of construction: 2007, Hydraulic Guillotine Shear Make: BOSCHERT Model: SX 3006 Year of Manufacture: 2007 Technical Data Manufacturer: Boschert Model: SX 3006 Year: 2007 Cutting capacity (mild steel ST 42): 6 mm Cutting capacity (stainless steel): 4 mm Cutting length: 3100 mm Gisdpoy Nmh Tsfx Agpjt Throat depth: 180 mm Backgauge: 1000 mm Cutting angle: 1.35° Motor power: 12 kW Voltage: 400 V, 50 Hz Dimensions (L x W x H): 3.80 x 2.28 x 1.85 m Weight: 7 t Equipment - CNC-controlled backgauge via ELGO controller, up to 1000 mm - ELGO Electric P 87 control - Electrically adjustable cutting gap with display for selected material thickness - Pneumatic sheet support device - Electrical cutting length limiter - Angle stop - 2 support arms - Cutting line illumination - Folding finger guard, approx. 1000 mm - Rear safety light curtain - Mesh safety guard All information is subject to change and provided without liability. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2011, total length: 3,800 mm, total width: 2,000 mm, total height: 1,900 mm, Colour: Grey Weight: 6.000 kg Gsdpfx Agjy Nk S Aspjit Price: On request - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 22106 - Drive system: Teach-in - Control system brand: Robosoft - Control system type: SP8 - Drive type: Hydraulic - Configuration: Guillotine - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 22 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Fixed table - Options: Digital readout - Transport dimensions: 3800mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, total length: 4,100 mm, total width: 1,900 mm, total height: 1,750 mm, Colour: Blue Gedpfx Agsy Nk R Sepjit Weight: 6.500 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 10.769/94 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 16.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3150 - Throat depth [mm]: 160 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed with lift-up guard - Angle adjustment: Motorized - Options: Digital readout - Transport dimensions: 4100mm x 1900mm x 1750mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, sheet width 3190 mm plate thickness 6 mm distance between columns 3250 mm cutting angle 1,2 ° no. of strokes 32-75 Hub/min column arm 100 mm back stop - adjustable 5-1000 mm table height 800 mm oil volume 150 l total power requirement 15 kW weight of the machine ca. 6200 kg Equipment: - electro-hydraulic guillotine shear type “swing cut” - RAS “MULTICUT-ECO 2000” CNC control unit * movable, from the front * 3 axes control unit with up to 900 program lines * Sheet holding device for thin sheet cutting can be switched on * Including piece and cycle counter * Operating modes selectable - CNC electro-motorized back gauge ... Travel range 5-1000 mm * Traversing speed ... 180 mm/sec. - Front support plates with ball rollers - central motorized cutting gap quick adjustment - 1x RAS extra long side stop - 2x RAS extra long support arms - 1x free-moving foot switch - 1x RAS pneumatic sheet holding device for thin sheet cutting - 1x RAS movable scrap diverter Gsdpfx Aey I Dawjgpsit - 1x RAS extra blade set for guillotine shears

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Gisdpfx Ajy H D I Esgpjt Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Scrap container Entry safety barrier

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 23708, power: 7.5 kW (10.20 HP), HACO TS 3006 Atlantic Godpjy Dpzfsfx Agpeit - Working length: 3050 mm - Mild steel capacity: 6 mm (400N/mm2) - Min. cutting angle: 0.5° - Max. cutting angle: 3.0° - Number of hold-downs: 18 - Strokes per minute at smallest angle: 14 - Strokes per minute at largest angle: 8 - Working height: 770 mm - Motor power: 7.5 kW - Total length: 3800 mm - Total height: 1750 mm - Total width without CE guard: 1650 mm - Total width with CE guard: 2700 mm - Control: SP9 Robosoft - Weight approx. 4500 kg

Condition: used, Year of construction: 1984, total length: 3,700 mm, total width: 2,000 mm, total height: 1,650 mm, Colour: Grey Weight: 5.000 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 8406029 - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3050 - Throat depth [mm]: 200 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 3700mm x 2000mm x 1650mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gisdpfx Agjy Dcm Uopst Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: ShearOne H3000-6_12, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 7,000 kg, total length: 2,700 mm, total width: 4,500 mm, total height: 2,100 mm, warranty duration: 36 months, travel distance X-axis: 1,000 mm, cutting length (max.): 31,000 mm, cutting width (max.): 3,100 mm, Equipment: safety light barrier, Hydraulic guillotine shear ShearOne H3000-6 from CoastOne in Finland Gjdjy A Ntxjpfx Agpjit Cutting length - 3,100.0 mm Sheet thickness 400 N/mm² - 6.0 mm Sheet thickness 700 N/mm² - 4.0 mm Cutting angle ° - 0.5 - 2.0 Back stop - 1000 mm

Condition: excellent (used), Year of construction: 1999, actuation type: hydraulic, working width: 3,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, back gauge speed R-axis: 100 mm/s, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, We offer this very good AMADA PROMECAM GS 630 hydraulic guillotine shear, year of construction 1999. If you have any questions or need more information, feel free to send us a message or give us a call. CUTTING LENGTH: 3050 MAX THICKNESS MS: 6mm Gijdpfey Ax N Nex Agpjt MAX THICKNESS SS: 4mm BACK GUAGE LENGTH: 1000mm BACK GUAGE: PROGRAMMABLE POWER SPEED 100M/PER/MIN MOTOR POWER: 5.5KW

Condition: good (used), functionality: fully functional, Year of construction: 1996, The machine is in good technical condition; inspection possible by arrangement. Weight: 11,560 kg Cutting length: max. 4,050 mm Cutting thickness: max. 6.3 mm Gjdpfx Agoyzzf Dspoit

Condition: excellent (used), Year of construction: 1990, Promecam GH840Z Shear, 4100 mm blade, cutting capacity 8 mm / 12 mm. In working condition and well-maintained, with sheet metal support. Giedpfx Ageyy Dg Ujpot

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS Gisdpfxeyypb Rs Agpst SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: used, functionality: unexamined, Guillotine Shear Replacement Blade Hole spacing: 190 mm Overall length: 3120 mm Godpfxoyym Rvj Agpoit Depth: 12 mm Width: 57 mm Total lower angle: 8° Total upper angle: 6° Contact us for a quote

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Serial number: 134361 Year of manufacture: 2012 Gisdpfx Agjyyk Urjpot Control: Fanuc series 160 I PB Max. sheet size: 3000 x 1500 mm Machine weight: 15,100 kg

Condition: good (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, Hezinger B 06 - 4000 hydraulic guillotine shear, year of manufacture: 2024, NC control ELGO P 40 T with touch screen, sheet thickness at 400 N/m²: 6 mm, sheet thickness at 700 N/m²: 4 mm, cutting angle: 1.5°, Giedpfeyxgbxjx Agpjt stroke rate: 13 / min, throat depth: 250 mm, 18 hold-downs, backgauge: 1,000 mm, traversing speed: 80 mm/s; accuracy: +/- 0.1 mm, cutting gap adjustment, cutting length limitation, controlled backgauge, cutting line illumination with shadow, max. cutting capacity: 6 mm, max. hydraulic pressure: 220 bar, machine weight approx. 11,000 kg, max. cutting length: 4,000 mm,

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm Giedpfx Ageywzbdopjt -Weight: 5980 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 32231, control type: CNC control, sheet thickness (max.): 6 mm, LVD MVS 6/4050 Guillotine Shear / Sheet Metal Shear – Year of Manufacture 2008 For sale is a robust and reliable guillotine shear from the renowned manufacturer LVD. Technical Data: Manufacturer: LVD Company n.v. Model: MVS 6/4050 Year of Manufacture: 05/2008 Maximum Cutting/Pressing Force: 197 kN Max. Sheet Thickness / Capacity: approx. 6 mm (typical for the model, depending on material) Working Length: approx. 4050 mm Max. Force: 10,000 daN Connection: 400 V / 50 Hz Power: 10.1 kW Description: The machine is in good used condition and is fully functional. It is ideally suited for precise cutting operations in steel and metal construction as well as industrial sheet metal processing. Its solid construction ensures high cutting quality and long service life. Features / Highlights: Industrial design High cutting accuracy Easy to maintain Proven LVD quality Fields of Application: Gsdpfx Agjywpkaspeit Metal construction Sheet metal processing Workshops & production Viewing by appointment. The machine is currently inbound from England. Export, import, and transport can be arranged by us for an additional fee.

Condition: used, Year of construction: 2021, machine/vehicle number: 168600, Reference No. 26029 Technical Data: Gsdpeywhuwsfx Agpsit - Max. cutting width: 2080 mm - Max. cutting capacity at 45 Kp/mm²: 6 mm - Throat depth: 150 mm - Automatic cutting angle adjustment: 0.3 – 2° - Automatic cutting gap adjustment - Number of hold-downs: 10 pcs - Strokes per minute: up to 22 1/min - Front angle gauge approx.: - 2 front support arms approx.: - Motorized backgauge with positioning control up to 1000 mm - Rear area safety device with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot switch - Drive: 400 V / 11 kW - Space requirement approx.: W 3150 x H 2150 x D 2300 mm - Weight approx.: 4.8 t

Condition: used, Year of construction: 1977, sheet width 3050 mm plate thickness 6 mm weight 7.000 kg range L-W-H 3450x2200x1750 mm Equipment/accessories: Gedsyv Nzcspfx Agpeit - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch