Bracktechnologie

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: Podpfxozhkgzo Ag Tegn - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Rietschle, rotary vane vacuum pump type KTA 80/1 (08) TN -Suction capacity: 80 m³/h -Pressure: 0.71 / -0.6 bar -Drive: CSM 4 kW / 1420 rpm -Dimensions: 840/420/H310 mm Pjdpfx Ajzhkfwog Togn -Weight: 101 kg

Condition: excellent (used),

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2011, Empty weight: 9.700 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Pgsdpfezhkdysx Ag Tsn Axle 3: left 8 mm right 8 mm

Condition: good (used), Year of construction: 2017, STARRAG-HECKERT HEC 630F Horizontal Machining Center Year of manufacture: 2017 Control system: SIEMENS 840 DSL-711 Travel ranges: X - 850 mm / Y - 750 mm / Z - 850 mm Operating hours: approx. 25,719 (as of May 2026) Spindle hours: approx. 8,451 (as of May 2026) Equipment: Hydraulic clamping system, 6-channel, 90 bar at the setup station and in the working area modified tool holder, HSK-A 100 with chain magazine with 45 storage locations Pgjdszhkdtjpfx Ag Tsn Coolant unit with non-woven filter Coolant temperature control including temperature compensation Increased coolant pressure to 80 bar Process cooling via internal coolant supply to the main spindle with compressed air instead of coolant Swiveling shower Rinsing gun Clamping station platform with approx. 200 mm height Emission extraction system for the working area Visiport, electric Optical measuring probe RENISHAW OMP60 Main spindle diagnostics Signal light, 4-color Tool breakage monitoring, mechanical, parallel to main machining time Starrag Connect Warm-up program Manual control panel Electronic handwheel All other accessories visible in the images and video are not included in the scope of supply and are therefore not part of this sale. The scope of supply includes only the accessories that are explicitly listed here, in the order confirmation, and in the invoice. Technical data, equipment, plans, transport & manufacturer's brochure – see PDF. All technical specifications, illustrations, and content are non-binding and without warranty. Subject to change and errors. FCA (Free on Truck) D-08427 Fraureuth packaging only Delivery time: November 2026 / Subject to prior sale 20% down payment immediately upon conclusion of the purchase 80% final payment 14 days before the start of dismantling

Condition: used, mileage: 541,886 km, power: 390 kW (530.25 HP), first registration: 12/2021, fuel type: diesel, empty load weight: 8,558 kg, maximum load weight: 9,442 kg, overall weight: 18,000 kg, tire size: 385/55 R 22.5, wheelbase: 3,800 mm, next inspection (TÜV): 07/2026, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,500 mm, total width: 40,000 mm, total height: 61,600 mm, Year of construction: 2021, front tire size: 315/70 R 22.5, Equipment: air conditioning, cruise control, differential lock, navigation system, parking heater, spoiler, Work lights, electrically adjustable and heated exterior mirrors, disc brakes, fixed roof spoiler, differential lock, tachometer, electric windows left + right, Super Space Cap cab, driver’s seat with air suspension, leaf-air suspension, radio, 12 gears, automatic transmission, lifting and lowering, air conditioning: automatic climate control + auxiliary air conditioning unit, refrigerator, leather steering wheel, air horns, multifunction steering wheel, navigation system, fog lights, PTO prepared, entertainment: radio/CD/Bluetooth/navigation, sleeper cab, 2 sleeping berths, heated driver’s seat, spoiler package, standard auxiliary heater, fuel tank capacity 845 liters (aluminum) + 430 liters (aluminum), cruise control, Safety Package -1, auxiliary retarder brake, additional long-range lights, Euro 6 engine, wheel arrangement 4x2, auxiliary air conditioning unit, skylights, Top Safety Package, lane change warning system, adaptive cruise control, emergency braking system, DAF Night Lock, $%&CRLF%&LED lighting package, sun visor. Podpfxszhkdms Ag Tsgn

Condition: used, empty load weight: 6,854 kg, maximum load weight: 29,146 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2014, next inspection (TÜV): 05/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, total length: 25,500 mm, total width: 40,000 mm, total height: 138,860 mm, suspension: air, tire size: 385 / 65 R 22,5, color: blue, Year of construction: 2014, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer Schmitz SCB, air suspension with lift function, raising and lowering, lift axle on the first axle, quick-release fasteners, two storage compartments, stake pockets, spare wheel holder without wheel, 5 rows of aluminum insert planks, 7-pin and 15-pin sockets, document box, customs cable, aluminum rims, 2 x LED reversing lights, stake pockets on the side and in the middle without stakes, 2 x pallet stop rails. Pgjdpfxszhkdgj Ag Ton

Condition: new, Year of construction: 2026, OSTERBERGER HTAP.Servo 2000-630 Brand new 3-axis CNC press brake with CYBELEC CNC control CybTouch8, featuring automatic bend angle calculation, bending sequence calculation, and color graphics. Maximum pressing force: 630 kN Maximum bending length: 2,000 mm / 2,500 mm / 3,200 mm Distance between side frames: 1,580 mm / 2,080 mm / 2,700 mm Overhang in side frames: 250 mm Press beam stroke: 100 mm Maximum possible installation height: 320 mm Press beam travel speeds: - Downward: 50/6 mm/sec - Upward: 60 mm/sec Table width: 160 mm Oil tank capacity: 120 liters Dimensions (approx.): 2.6 / 3.1 / 3.6 m x 1.5 m x height 2.4 m Drive power: 5.5 kW Weight (approx.): 4.8 / 5.5 / 6 t Two-axis precision back gauge - Adjustment range: 500 mm - R-axis: 90 mm Back gauge fingers slide on dual linear guides Equipment: - Die block Pedpfx Aozhkdaeg Togn - Crowning system - Upper tool quick-change system - 2 support arms on linear guides - Bending area lighting

Condition: good (used), Waters Type: Synapt G2-Si SYNAPT G2-Si mass spectrometry (TOF with ion mobility) Pgjdszhkcvjpfx Ag Ten New possibilities for discovery in your laboratory Data, data processing, and groundbreaking performance. SYNAPT enables the detailed characterization of complex mixtures and molecules with uncompromising qualitative and quantitative performance, optimized workflows, and a platform of unparalleled versatility. Ultimate UPLC/MS/MS performance Powerful data-independent and data-dependent solutions CID and ETD fragmentation Wide range of experimental options Upgrade to three separation dimensions! Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Bühler PML2 Premium Laboratory Stirred Ball Mill Manufacturer: Bühler LTD, Uzwil, Switzerland Type: FPML2 Premium / PML2 Premium Machine Type: Laboratory Stirred Ball Mill / Bead Mill Application Area: Process development, dispersion, and fine grinding at laboratory scale For sale is a laboratory stirred ball mill from Bühler. The PML2 Premium is a modular laboratory system for the development and optimization of grinding and dispersing processes at laboratory scale. The system is suitable for research and development work as well as small-batch trials of various products. Application areas: Automotive OEM and refinish paint systems Anti-corrosion paints Industrial paints Color filters for display technologies Metal, ceramic and glass pastes Inkjet inks Liquid printing inks Liquid toners Agrochemicals Pigment concentrates TiO₂ dispersions Adhesives and sealants Technical data: Active grinding chamber volume: 0.2 - 1.2 dm³ Volume of grinding media tank: 2.4 dm³ Max. grinding media pressure: 7 bar Motor power: 2.2 kW at 3,000 rpm Rotor speed: 500 - 4,500 rpm Cooling water connection inlet: G 1/2" Cooling water connection outlet: G 1/2" Compressed air connection: G 1/4" Power connection: 400 V Frequency: 50 Hz Phases: 3 + N + PE Rated current: 16 A Machine dimensions approx.: 617 x 458 x 862 mm (W x D x H) Machine weight approx.: 150 kg Equipment: Bühler PML2 Premium grinding system Control panel / switch cabinet Grinding container system Pump units according to scope of delivery Piping and connections Existing documentation Further accessories as shown in the pictures Weights of the components: Machine: approx. 150 kg Pedpfozhkcpsx Ag Togn Hose pump: approx. 30 kg Gear pump: approx. 25 kg Laboratory hose pump: approx. 8 kg Attachable container: approx. 5 kg Tray: approx. 1.5 kg Condition: Used From a laboratory environment Optical condition as shown in the pictures Functional scope not fully tested Inspection possible by appointment Scope of delivery: Bühler PML2 Premium laboratory stirred ball mill Control cabinet Existing attachments Documentation Further accessories as shown in the pictures Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data and prior sale.

Condition: good (used), EA Elektro Automatik Type: EA-EL 9080-200 EA Elektro-Automatik Electronic Load (2.4kW) 0-80V 0-200A Technical Data: Mains Input: Mains voltage switchable 115V/230V Mains frequency 50/60Hz Mains fuse T2.5A DC Input: Input voltage U nominal 0…80V Pgjdpfx Ajzhkciog Ton Input power P nominal 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C ambient Input current I nominal 0…200A Overvoltage protection limit 1.1 * U nominal Maximum permissible input voltage 100V Voltage regulation: Setting range 0…80V Display resolution 100mV Accuracy

Condition: excellent (used), Optical Emission Spectrometer Ultima 2 benchtop unit, sequential spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order, 160-800 nm without image Rapid overview analysis Pgjdpszhkccefx Ag Tsn IMAGE: Rapid overview analysis IMAGE NAVIGATOR for JY 2000-2, JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the RF coil of the Ultima 2 Argon humidifier – for the analysis of solutions with high salt content. ULTIMA 2 ICP-OES – Optical Emission Spectrometer Reliable, highly efficient 40.68 MHz semiconductor generator Complete and precise wavelength scan from 160 to 800 nm as standard Highest practical resolution

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box Pgsdpfx Aszhkb Seg Tjn (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Autotherm Type: Autotherm AW 95-12/VK/E temperature control unit Autotherm AW95-12_VK temperature control unit for water/glycol temperature control (fully refurbished) Autotherm AW temperature control unit: For highly precise temperature control of water. Autotherm temperature control units are used in various areas of industry, research, and laboratory applications. Temperature control units, for example, supply tempered water to tools, open baths, double-walled tanks, heat exchangers, and heating chambers, in order to maintain them at a highly precise, desired temperature. Application areas: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemical and pharmaceutical industries Paper manufacturing Medical technology Food industry Research Autotherm AKW AW95-12/VK temperature control unit Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to a cooling water network required Rated power: 14.5 kW Dimensions: 600mm x 840 mm x 910mm Power consumption: 400 Volt / 50 Hz 13400 watts, 19.6 A, 5.1 bar Condition: used Scope of delivery: (See image) Pgodjzhkb Eopfx Ag Tjn (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. Pedozhkbfjpfx Ag Tsgn CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Sheet thickness in carbon steel 2.5 mm Podpfx Agszhka Ue Tjgn Sheet thickness in stainless steel (700 N) 1.5 mm Rear stop up to 550 mm .....FASTI: 1020 x 2 mm

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Pjdpfszhkazsx Ag Tsgn Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 12,000 h, laser type: fiber laser, laser hours: 12,000 h, laser power: 6,000 W, year of last overhaul: 2026, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, We are selling a Bystronic BySprint Fiber 3015 fiber laser cutting machine with 6000W power on behalf of a customer. The machine is fully operational and can be inspected while powered on. The last maintenance was carried out in 02/2026. Year of manufacture: 2016 Machine operating hours: 33892 h Laser operating hours: 11986 h Equipment/Options: Pjdpfjzhkausx Ag Tsgn Power Cut Fiber Detection Eye Nozzle changer, 40 positions Part and lateral conveyor Dust extraction system with 200l drum adapter (including drum) Observer (camera in the cutting area) The machine is located in the postal code area 67XXX.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 365 kW (496.26 HP), *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MTK Series are mobile type & closed circuit crushing and screening plant known as also sand making machine that is used for high percentage of cubical shape sand production purpose by processing soft and medium hard materials such as limestone, gypsum etc. MTK Series includes one stage of crushing process that is made by a tertiary impact crusher which is capable to produce high percentage of sand with good cubical shape. TECHNICAL SPECIFICATIONS: -Bunker: 10 m3 -Plant Dimensions: 17000x4500x3900 mm -Production Capacity: 200-300 Tons Per Hour -Crusher Type & Rotor Size: Tertiary Impact Crusher – 1200x1300 mm -Maximum Feeding Size: 120 mm -Vibrating Screen Size and Deck: 2000x5000 mm 3 decks Pgodpfx Aozhkanog Ten -Total Motor Power: 365 Kw -Generator (optional): 500 kvA MTK-130 IS A COMBINATION OF: • Hopper • Vibrating Feeder • Tertiary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 196 kW (266.49 HP), *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker Pedpfszhkabox Ag Tegn • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 50,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Psdpfx Agozhi U De Togn Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Pgodpfozhi Uwox Ag Ten Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. Pedpszhi Uqsfx Ag Tegn In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Psdpfx Agezhi Uko Tsgn Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: new, Year of construction: 2026, Three-axis CNC-controlled hydraulic press brake with servo drives + manual crowning system Axis - Y - (press beam up and down) Axis - X - (back gauge - forward and backward) Axis - R - (back gauge rail - up and down) Maximum pressing force 3000 kN (= bending 16 mm steel sheet S235jr over the entire bending length in a V-die with a width of 140 mm = inside radius 16 mm) Pgjdpozhi Udofx Ag Tjn Maximum bending length 2,500 mm Distance between side columns 1,700 mm Overhang in the side columns 400 mm Press beam stroke 300 mm Maximum possible installation height 520 mm Press beam travel speeds downwards 80 / 10 mm/sec - upwards 70 mm/sec Table width 400 mm Adjustment range of the back gauge forward and backward 550 mm – up and down 200 mm, oil tank capacity 250 liters Dimensions approximately 3.3 x 2.3 m x height 3.1 m Drive power hydraulic motor 22 kW Weight approximately 16,000 kg We also supply other model sizes.