Tworzywa Sztuczne Rafał Adamczyk

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Hsdpfxey Iblqj Acrel A total of four dryers of this model are available.

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Hedoy Ibi Aepfx Acrjl

Condition: used, Friction washer with stainless steel housing and stainless steel rotor. Hodpfx Acsy Ia Ukorjl Motor 22 kW

Year of construction: 2015, operating hours: 13,275 h, condition: used, functionality: fully functional, rotor diameter: 800 mm, We are offering this used ZENO ZTLL 1600x1800 shredder for hollow bodies, pallets, etc., year of manufacture 2015. This unit is very well suited for processing hollow bodies, PE waste bins, PP + PE crates, PP KLTs, and PO pallets. 1.1 m³ waste bins can be fed and shredded in one piece. The throughput for these fractions is 1,500 kg per hour. Other hard plastics such as ABS, PS, PMMA, and ABS-chromed materials can also be processed very efficiently. For these, the throughput rate is 2,000 kg per hour. Type: ZTLL 1600x1800 Machine number: 15A-6191 Year of manufacture: 2015 Weight: 12,000 kg Hsdpfx Aey Efgmscrol Main drive power: 90 kW Main motor current: 161 A Main motor voltage: 400/690 V Main motor speed: 1,450 rpm The main motor is equipped with forced ventilation. The motor was replaced with a new one in November 2023. Rotor speed: 80 - 140 rpm The rotor is equipped with 145 cutting crowns, each measuring 40 mm x 40 mm. The original rotor has been replaced. Hydraulic drive power: 5.5/1.1 kW Hydraulic motor current: 11/2.6 A Hydraulic motor voltage: 400/690 V Hydraulic motor speed: 1,500 rpm The unit is ready for immediate operation after installation. The floor of the unit is uneven. The unit is stored in 34431 Marsberg-Westheim, near the A44. We replaced the unit to further increase the throughput capacity of our facility. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2004, condition: not inspected (used), functionality: unexamined, machine/vehicle number: P04/034, SPARE PARTS DONOR!! - Non-functional device! EREMA SW4/134 RTF screen changer - Continuous partial-area backflush filter with 2 carrier pistons Hjdpjyymaqofx Acrel Main unit only, without accessories!

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Hsdpsyx U N Dofx Acrel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Price on request!

Year of construction: 2008, condition: used, functionality: fully functional, TECNOVA 105 RECYCLING LINE with WASHING LINE Re-pelletizing line for plastic recycling with washing line Production 350 kg/h 2 washing tanks in stainless steel Fosha 500 grinder Buffer silo Screw diameter 105 mm Hsdpfx Aeyx D Hfocrjl Forced feeder Double piston filter Degassing unit Hot die face pelletizing system Centrifuge and vibrating screen

Year of construction: 2010, condition: excellent (used), functionality: fully functional, JOVAL GUILLOTINE CB-2000 Guillotine for cutting plastic and paper reels Cutting force 25 t Cutting width up to 2000 mm Reel diameter up to 1500 mm Hodpfx Aeyrnn Sjcrol Motor power 10 HP Equipped with special steel blades Guiding system with replaceable guides Year 2010

Year of construction: 2016, condition: used, The metal separator, 3 units, from Sesotec, is available for sale. Our GF metal detectors for pneumatic applications provide optimal protection against production downtime, stoppages, and customer complaints. Hodpfx Acoyrl Nyorol Suitable for steel, copper, non-ferrous metals, and stainless steel.

Condition: used, Drive . kW Capacity . kg/h material . 8 pieces For manipulator A5.1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hedpfx Acoyqvm Terjl If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2019, condition: used, functionality: fully functional, TECNOVA 130 RECYCLING LINE Re-pelletizing line for plastic recycling Hsdpfx Acsyph I Herjl Materials that can be processed LDPE, LLDPE, HDPE Screw diameter 130 mm Double piston filter Feeding silo Single degassing Hot die face pelletizing system Centrifuge and vibrating screen Year 2019

Year of construction: 2016, condition: used, functionality: fully functional, MACCHI RECOTRIM ES 472 Re-pelletizing line for inline recycling of edge trims or material Materials that can be processed LDPE, LLDPE, HDPE and MDPE Output max. 50 kg/h Water cooled Hsdpfsyni I Sox Acrsl Pelletizer system on die-head Touch screen controller With PLC Installed power 33 kW Year 2016

Year of construction: 2026, condition: new, functionality: fully functional, Plastic crusher with 30 kW motor power, 800 mm wide rotor, capacity up to 1 ton of rigid plastic, 500 kg/h for film materials. Suitable for crushing PP, PE, PVC, ABS, etc. Equipped with 6 rotary blades and 4 fixed blades. Crushers are tested in our production facility under real 24/7 industrial working conditions. Very easy to open the crusher and change blades. Screen size: 12 mm. Electric cabinet included. A very strong and powerful machine. Optional air blower and silo storage for fully automatic operation are available. Spare blades and screen included. For more photos and working videos, contact us via WhatsApp. Hedoychdhepfx Acrel

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Hsdpexcnxdefx Acrol Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! Hsdpfxow U Swpe Acrjl For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Hodpsw D Uggofx Acrsl

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm • Drive Power: 55–132 kW • Dimensions: Hsdpfxewm Nfvo Acrjl o Length: 3,600 mm o Width: 2,600 mm o Height: 2,300 mm o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Condition: new, Year of construction: 2026, Mill without screen Xtra2-A / 26.26 St Low-speed mill without screen, with two coarse crushers, compact and mobile on 4 wheels, 2 of which with brakes. The feed hopper and cutting chamber can be easily and completely opened via a hinge mechanism and quick lock, which allows for quick and easy cleaning. Shredder-type rotor with two primary coarse crushers, each with three crushing fingers, which also allow for the crushing of awkward and larger pieces of scrap. Control with contactor and electrically redundant safety limit switches. The control unit is integrated in a plastic housing, including a 4-meter connection cable and a CEE 16A/6h plug. Standard Z-hopper made of transparent polycarbonate (PC) sheet with a wide loading opening. Hedpfxswktvge Acrel Collection box for ground material with a capacity of 8 liters, includes a suction hose for connecting a pipe with a diameter of ND 38 or 40 mm. Technical data: • Motor power: 1.5 kW • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Primary shredders: 2 pieces, each with 3 shredding fingers • Rotor speed: 32 rpm • Rotor: multi-tooth, 3 pieces • Static knives: 2 x 3 hardened knives • Cutting configuration: standard cutting module 4 mm (rotor tooth width); optional 5 mm

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2SG00002246, High-quality gear motor. The cutting chamber and gear motor of the SG-24T are from world-renowned manufacturers. The SG-14/24N series features a combined tooth and blade cutting edge. The cutting blades break large pieces into small ones, and the tooth cutting edge shreds the material with less dust. The cutting edge is designed to the desired size so that it can be reused immediately. The innovative cutting edge with inclined teeth reduces the possibility of stress concentration. It extends the service life and reduces dust generation. The motor shaft and rotor shaft of the SG-14/24T/24N are connected with a shaft coupling, allowing for convenient motor replacement. Hodpfx Acov Unt Aorel A signal light indicates a motor blockage, which can be cleared by reversing the motor. It automatically returns to normal operation once the fault is resolved. Compact design, easy to maintain and clean. Feed hopper made of transparent PC.

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 Hjdpjtuui Djfx Acrel 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Condition: new, Year of construction: 2025, functionality: fully functional, The compact, lightweight conveyor is equipped with a high-speed carbon brush motor. It is easy to install and provides excellent vacuum. Removable, user-friendly controls. All conveyors are equipped with a fabric filter and automatic reverse cleaning. Carbon brushes with automatic shut-off for maintenance alarm. Control is possible via the SPV-U proportional valve controller. 360° mounting possible. Hodpoqgdkbefx Acrjl All conveyors are equipped with a fabric filter and automatic reverse cleaning with alarm.

Condition: good (used), Crystallizer for PET recycling Year: 2008 Hjdpfsnxkd Isx Acrel

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing Hodpfxoi Dtbue Acrjl > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Hodpfx Aceiyynworjl Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2022, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm Hsdpfx Acjf N Nl Derel • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”