Witmetal

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, Control unit: OKUMA OSP P300LA-e Swing over bed: D450 mm Swing over cross slide: D350 mm Max. turning diameter: 230 mm Max. turning length: 500 mm X-axis travel: 165 mm Z-axis travel: 470 mm Max. spindle speed: 5,000 RPM Drive capacity: 15 / 11 kW (20 min. / continuous) Spindle bore: D62 mm Bodpfsziqp Ssx Aiholi Turret: 12-station Max. tool size: 25x25 mm Tailstock quill taper: MT5 Weight approx.: 3800 kg Dimensions (LxWxH): 2600 x 1830 x 1700 mm Accessories and Equipment - Coolant system - Chip conveyor - 3-jaw chuck D250 mm - Built-in tool presetter arm - Foot pedals - Machine leveling feet - Manuals The machine has very low operating hours and is in like-new condition. Under power in our showroom.

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 310 mm, spindle bore: 78 mm, rotational speed (min.): 4,500 rpm, total height: 2,120 mm, total length: 5,000 mm, total width: 2,065 mm, overall weight: 8,100 kg, DBC Turning Length 1000 mm Swing over bed Ø 310 mm Spindle bore 78 mm Power 25 kW Length 5000 mm Width 2065 mm Height 2120 mm Weight 8100 kg Bedpfx Ajzimnqoiholi Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Okuma LU15-MY Year of manufacture: 2001 Commissioned: 2002 Control system: U100L A video of the machine can be viewed on our website. Machine features: ▪ IGF dialog programming ▪ Movable tailstock ▪ Powered tools – 12 stations on the A-turret ▪ C-axis ▪ Y-axis ▪ Touch probe ▪ Preparation for steady rest on the B-turret ▪ Internal chuck ▪ Signal tower ▪ Mayfran chip conveyor Technical details: • Max. turning diameter: 340 mm • Max. turning length: 1000 mm • X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) • Z-axis travel: upper 1,040 mm; lower 1,015 mm • C-axis travel: 360° • Spindle – number of speed steps: 2 – automatic • Bore diameter: 62 mm • A-turret (upper): 12 tools, all suitable for M-tools, VDI 40 • B-turret (lower): 8 tools, VDI 40 • Rotating tool speed: 45~4500 min -1 • Rapid traverse feed rate: mm/min X: 15,000 Z: 20,000 C: 200 min -1 • Tailstock quill diameter: 90 mm • Tailstock quill stroke: approx. 100-120 mm ▪ Machine dimensions including chip conveyor L x W: approx. 4300 x 2200 mm ▪ Machine height: approx. 2230 mm ▪ Weight: approx. 7900 kg Blsdpfx Aozh Iwkjihoi Optional: ▪ Transportation organization and execution ▪ Machine delivery and installation ▪ Machine commissioning

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 38 rpm, total height: 1,745 mm, total length: 2,200 mm, total width: 1,720 mm, overall weight: 4,300 kg, Okuma SpaceTurn LB300-M CNC Okuma OSP U100L Controller Max. turning diameter 340 mm Max. turning length 480 mm Distance between centers 500 mm X-axis travel 280 mm Z-axis travel 500 mm C-axis 360° (0.001 increment) Rapid traverse X-axis 20,000 mm/min Rapid traverse Z-axis 25,000 mm/min Incremental feed rates for X and Z axes from 0.001 to 1.000 mm Spindle mounting A2-8 Speed 38-3800 rpm Power 22 Kw Bsdpfx Aozh Hu Uoihsli Powered tools Speed 45-4500 rpm Power 3.3 Kw Turret Type VDI 40, 12 Stations Square tool section 25 mm Bore section 40 mm Tailstock Bore diameter 90 mm Bore travel 120 mm Tailstock mounting MT5 Chip conveyor Kitagawa B210 chuck

Condition: used, Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, Manufacturer Gildemeister CTX 320 V5 Year of manufacture 2004 Condition: Used Control system: Siemens 840 D ShopTurn Operating hours: 60,000 h Spindle hours: 29,000 h Technical data: Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Spindle speed range - main spindle: 5000 rpm Spindle speed range - sub spindle: 5000 rpm Bar diameter: 65 mm C-axis: 0.001° Turret positions: 12 Tool holder: VDI 30 Driven tool stations: 12 Spindle speed of driven tools max.: 5000 rpm Rapid traverse X / Z: 60 / 45 m/min Total power requirement: 32 kVA Machine weight approx.: 4.3 t Space requirement approx.: 3895 x 2284 x 1885 mm Accessories/Equipment Chip conveyor Parts catcher Conveyor belt C-axis Driven tools Documentation --Used machine, no guarantee-- Bledozh Ewhepfx Aihji --Errors and prior sale excepted--

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm X/Z travel: 192/700 mm Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag Blodpfx Aozhwnreihsi

Condition: good (used), Year of construction: 2000, Well-maintained, used CNC lathe from Okuma. Type: LT10-M Capacity: ø 210 x 130 mm Spindle bore: ø 53 mm Okuma OSP-U100L control system Bjdozhal Hepfx Aihjli Further specifications can be found in the data sheet.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,700 mm, total length: 3,600 mm, total width: 1,600 mm, Equipment: rotational speed infinitely variable, USED ​​DOOSAN LYNX 2100B 2-axis lathe with Fanuc i-Series CNC Bljdpfx Aozhaawsihji

Condition: ready for operation (used), Year of construction: 2013, Available immediately from university: L & Z Eagle Lathe Type LC 340 Year of manufacture: 2013 Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 205 mm Turning length: 1000 mm Spindle bore: 38 mm Drive: 1.5 kW Spindle speeds: 60 – 2000 rpm Tailstock quill: 40 mm Chuck: 160 mm Faceplate: 200 mm Four-way tool post Blsdpfx Aozg Tkysihji Weight: 2 t Price: EUR 2,000 – plus VAT, ex location

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, Bodpfx Aijzg Edljholi coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, Blodpfx Aszg Eb Deihji sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: used, Year of construction: 1995, turning diameter 340 mm turning length 500 mm control OSP 7000L weight of the machine ca. 4000 kg Bsdpszgxfpsfx Aiholi

Condition: excellent (used), Year of construction: 2022, control OSP P 300LA spindle turning speed range 5000 U/min turret (x-stations) 12 turning diameter over bed 580 mm turning diameter over slide rest 470 mm turning diameter 340 mm turning length 800 mm x-axis 260 mm z-axis 1.010 mm y-axis 120 mm spindle nose ASA 6" spindle bore 90 mm w-axis 895 mm total power requirement 22 kW weight of the machine ca. 6,8 t Bedpfjzfql Esx Aiholi dimensions of the machine ca. LBH 3,5 x 2,1 x2,5 m • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetter: Manual • Programming: IGF conversational programming incl. Chip Conveyor incl. Tools

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Value of included equipment: 18,000–20,000 euros. * 4-axis machine. * Fully independent tailstock, programmable for Z-axis movement and clamping via M-codes. * 12-station turret, all stations motorized. * C-axis. * Y-axis. * Integrated main spindle motor: 18.5 / 22 kW. * Motorized tool motor: 5.5 kW. * Motor starting torque: 620 N·m. * Integrated motor with no belts or gear stages. * Main spindle size: A2-8. * Tailstock: MT5 Morse taper. * Bar capacity: 75 mm. * Kitagawa B-210 spindle chuck. * Prismatic guides on all axes. * Spindle speed: 4,200 rpm. * Power tool speed: 4,000 rpm. * Turning diameter: 520 mm. * Machinable diameter: 380 mm. * Machinable length: 1,050 mm. * Oil cooler for the spindle. * Communication ports via USB, PCMCIA card, and RS-232. * Automatic control of tool torque and tension. * IGF OSP P200-L conversational automatic programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool anti-collision system. * Tool life management and monitoring. * Rapid traverse speeds of 20 and 25 m/min on the X and Z axes. Bljdpfx Aozd Nt Ejihsi * Turret indexing time: 0.2 seconds. * Renishaw arm for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Automatic control of tool torque and voltages. * IGF OSP P200-L automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool anti-collision system. * Tool life management and monitoring. * Rapid traverse speeds of 20 and 25 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw arm for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Dual foot pedal for opening and closing the main chuck and tailstock. * Side-mounted hinged chip conveyor. * Complete set of static tool holders for external and internal operations. * Complete set of axial and radial motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 6,200 kg. * Machine is currently in operation. * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2002, turning diameter 300 mm turning length . mm control Mazatrol 640 T x-travel 190 mm y-travel 1000 mm z-travel 575 mm turning speeds 4000 U/min feed 30 m/min number of tools 12 bar loader nein total power requirement 18,5 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 5600x2100x2200 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Bsdpfxszdu Sto Aihsli please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2022, Type: CNC lathe Manufacturer: OKUMA Model: GENOS L2000-e Year of Manufacture: 2022 Bsdpfx Aozc I Aqeiholi Serial Number: L2E0253 Condition: Used

Condition: used, Year of construction: 2019, Type: CNC vertical machining center Manufacturer: OKUMA Bljdpozc I Adofx Aihoi Model: GENOS M460-VE-e Year of Manufacture: 2019 Serial Number: 0711-101349 Condition: Used Quantity: 1

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Bljdozc E Dfspfx Aihsi Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Control system: OSP 5000L-G CNC system Data transmission: RS232 Tool turret: 12 positions Power supply: 3 × 400 V Rated machine power: 21 kVA Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: like new (used), Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 510 mm, turning diameter: 300 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,921 mm, total length: 2,880 mm, total width: 1,711 mm, overall weight: 4,200 kg, Horizontal CNC turning center with Y-axis Control system: Fanuc F0TF+ Accessories: Chip conveyor, articulated belt type Combi500, manufactured by Cromar Pressure increase by 20 bar Tool magazine with 12 tool positions (BMT45P) Profluid bag filter LTA air filter, type AC 500R Air gun Hainbuch clamping device for main and counter spindle Blodpfozcpd Ajx Aihsi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. Bedozcmmnjpfx Aihsli The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required.

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Bodpfx Aijzb R Iaehjli Speed 5,000 min-1 8-position turret Minimum quantity lubrication

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 560 mm, turning diameter: 560 mm, spindle bore: 63 mm, overall weight: 5,500 kg, Fanuc OT Bedpfx Aijzbam Eshjli Length capacity: 560 mm Diameter over slide: 340 mm, turning diameter: 560 mm Turret: 10 stations Spindle: 11 kW Chip conveyor

Condition: good (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 500 mm, turning diameter: 280 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, Well-maintained SPINNER TC400 CNC lathe manufactured in 2012 and equipped with Siemens Sinumerik 840D ShopTurn control. The machine is in good technical condition, regularly serviced and ready for immediate operation. Blsdpfx Aezarxwoihsi This machine is equipped with a tailstock and is ideal for the machining of shafts, flanges and precision turned components. Its rigid construction and reliable Siemens control system ensure excellent machining accuracy and productivity. The machine can be inspected under power by prior arrangement.

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm Blsdpfx Aszak Dxoihoi SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Tailstock Coolant pump and tank Bedpfozakgtjx Aiholi Swarf conveyor