Arca Technologies

Year of construction: 1997, condition: used, Mistral 0705 Co-ordinate Measuring Machine. S/No. 00851 (1997), Bed Size 1280mm x 910mm, Renishaw PH10M Probe, Wired Remote Control, Work Space 700mm x 900mm, Renishaw PHC 10 Probe Head Controller, ACC 2000 CNC Controller, Dell Desk Top with Monitor and Accessories, Selection of Probes, Fixture Plate 610mm x 610mm Hfedpfx Absyuwrlevsd Location: This lot is located in Birmingham, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Extronica EMS 5535-PS50 Spark Eroder, Tank Size 800 x 500 x 350mm, Table Size 550 x 350mm, Quill Travel Z Axis 250mm, 340 Litre Capacity Dielectric, PS 50 Moset Pulse Generator. S/No. 83/2000 Hfsdpfx Abjyuwn Tovod Location: This lot is located in Birmingham, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Metris coördinatenmeetmachine (CMM) gemaakt in het Verenigd Koninkrijk, nu eigendom van Nikon Metrology. LKMetrologie Structuur van granieten basis met keramische brug en keramische Z-ram (LK Ceramic Bridge Technology) Geschikte probes: Renishaw PH10M/MQ, TP20, TP200, SP25M, SP80 of Nikon LC15Dx / LC50Cx laserscanners Laatste Kalibratie: 19-09-2024 Functies: Keramisch brugontwerp – zorgt voor dynamische stabiliteit en stijfheid Hoge nauwkeurigheid en snelheid voor dimensionele inspectie van grote of complexe onderdelen Geschikt voor contact- en laserscansensoren Typische toepassingen: lucht- en ruimtevaart, automallen, gereedschappen en precisiefabricage CAMIO MULTISENSOR CMM-SOFTWARE INLCUSIEF: Renishaw (optioneel): - Sonde-interface PI 200 - Interfaceselector IS1-2 - Renishaw PH10MQ - Nikon LC60D - Nikon LC15Dx - TP 200-sonde - SM25-1 - SM25-2 - SM25-3 - FCR 25 Autochange Rack - AOR3 Autochange Rack - Bol Renishaw + Motivair Luchtdroger Hjdpfoyuwmcsx Abvefd

Year of construction: 2023, operating hours: 149 h, condition: used, functionality: fully functional, machine/vehicle number: 11-40-06-89, German Bionic Cray X Exoskeleton Generation 5 – only 149 operating hours – complete with battery & charging station For sale is an active exoskeleton from German Bionic (Generation 5) designed to assist with lifting and carrying tasks. Ideal for warehouses, logistics, production, or skilled trades to reduce strain on the back and body. The device is in perfect working condition and has only been used for 149 operating hours. Highlights: ✔ Active exoskeleton for physical relief ✔ Various chest and leg strap sizes – individually adjustable Hfsdjyutcmepfx Abvjd ✔ Easy handling: put on, switch on, get started ✔ Only 149 operating hours ✔ Fully functional Scope of delivery: • German Bionic Exoskeleton Gen. 5 from 2023 • 40V battery • Original charging station • Leg and chest straps in various sizes Condition: Signs of wear present, but technically flawless.

Year of construction: 2011, condition: new, functionality: fully functional, machine/vehicle number: DWG-103504, Unused Bardex hydraulic cylinder assembly for offshore, marine, or heavy industrial application. Unused Bardex hydraulic cylinder assembly in very good stored condition. The unit has been kept in its original wooden crate and appears unused. Nameplate is intact and clearly shows Bardex Corporation identification. Details: Manufacturer: Bardex Corporation Drawing No.: DWG-103504 Unit / Part No.: 9107-122 Date of Manufacture: 20 May 2011 Hfodjyurnbepfx Abved Minimum Temperature: -40°C / -40°F Condition: Unused, stored in crate Location: Dubai, UAE

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Main features: - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Hodpfx Asyuf T Rsbvofd Condition: good technical condition, ready for operation. Price: negotiable For serious inquiries, please contact by email.

Year of construction: 2018, condition: good (used), Golfcar EZ-GO RXV 2-seater Golf Cart Golfcart CARGO BOX 2018 with Charger. Hsdpfx Abeyufunovefd DUTCH ROAD REGISTRATION. Video can be sent via Whatsapp. Ongoing stock availability, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive, feel free to make an appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 1990, condition: used, Gasparini Hsdpfx Abjyucppovofd

Year of construction: 2025, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: H19-S, Complete PUR spray foam insulation system with vehicle included. The equipment is installed in a Citroen Jumper (year 2021). The vehicle is part of the sale and included in the price. Hfedpsyub I Dsfx Abvjd Equipment included: • H19-S spray foam machine • Heated hose 51 m • EVOPUR spray gun • Electric mixer • Two transfer pumps • Material recirculation system • Walter VGK 530-3.0/90 compressor • Refrigerated air dryer • 24 kW generator installed in the vehicle The machine was not used on construction sites and was only started regularly for service and testing purposes. System is in very good condition and ready for immediate use. Vehicle: Citroen Jumper Year: 2021 Inspection and demonstration of the machine are possible. Sold by Austrian company. Price is net. Invoice available. Intra-community sale with valid EU VAT number possible.

Year of construction: 2022, condition: good (used), functionality: fully functional, We are selling our Montana Crystal Rock due to upgrading to a Wintersteiger Jupiter. Hjdpfxsyuayfs Abvofd

Year of construction: 2004, condition: used, functionality: fully functional, Machine for automatic bonding of copper capillaries to aluminium tubes. Hjdpsyt Srqefx Abvsfd

Year of construction: 2004, condition: used, functionality: fully functional, Machine for resistance welding of copper and aluminium tubes. Hodpfxsyt Sqto Abvsfd

Year of construction: 2004, condition: used, functionality: limited functionality, Machine for automatic pressing of tube-plate evaporators. Hfodoyt Sqgspfx Abvsd

Year of construction: 2004, condition: used, functionality: fully functional, Machine for cutting and 2D bending of aluminium tubes with a wall thickness of 7 and 8 mm. Hfsdpfx Absyt Sp Njved

Year of construction: 2002, condition: used, functionality: fully functional, Machine for cutting aluminium and copper pipes with the option for pipe end processing. Hfjdeyt Sppjpfx Abvsd

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Hfjdeyt Spcopfx Abved

Year of construction: 2018, operating hours: 3,550 h, condition: good (used), fuel type: diesel, Kubota RTVX900 UTV Gator 4X4 Diesel with hydraulic tipper bed, 2018, 3550 hours Video available via WhatsApp. Ongoing stock, see website. Hfsdpfx Asyt Nr Uebvsd Prices ex Nuland. Van de Wert Trading B.V. offers a changing inventory of machines, trucks, trailers and attachments. All our supplies are at trade prices and sold AS-IS without any guarantees. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) Hfodpeyt Ihbjfx Abvsd • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: ready for operation (used), Fanuc manipulatierobot die een last van 700 kg kan hanteren Heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter. Hfedpoytyqhsfx Abvsd met R-30iB Plus controller control: R-30iB A05B - 2614 - B090

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 4512 31727.01, Machine for spot-welding wire onto tube. Hfsdpfxsytykhe Abvjd

Condition: good (used), Year of construction: 2013, Ionizing Air Blower Haug Ion-Air Blower Manufacturer: Haug GmbH & Co. KG Model: Ion-Air Blower Type: Ion-Air blower Id. 04.0361.000 Serial number: 13889018 Hfedpjytqkrefx Abved Year of manufacture: 2013 Protection class: IP40 Primary voltage: 230 V Frequency: 50–60 Hz Power consumption: 70 VA CE marking: available Function: Neutralization of electrostatic charge using ionized airflow Field of application: Plastics processing, injection molding machinery, packaging and automation lines

Condition: new, functionality: fully functional, machine/vehicle number: L SK II - 370 - 7,5, Year of construction: 2021, operating hours: 1 h, load capacity: 150 kg, total length: 7,500 mm, We are offering this new FramaTec column-mounted crane, year of manufacture 2021. The crane has only one operating hour to date. The suction unit is included in the price. Hsdpfx Abeytqiuovofd If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base Hjdpfxjytgvwo Abvefd - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, overall weight: 122 kg, LASER IN LIKE-NEW CONDITION, USED ONLY FOR TESTING AND DEMONSTRATION PURPOSES Laser cutting and engraving machine for the signage and promotional marketing industries - made in USA ▪ CO2 laser tube in a sealed metal housing, 25 KW power, air-cooled, 10,640 nm wavelength, approximately 30,000 working hours lifetime. Hodpeytdtysfx Abvefd ▪ The laser source can be quickly replaced using the 'Quick-Change' system, without technician intervention or the need to realign the laser beam. Universal manufactures only RF-Excited sealed CO2 laser sources, which provide constant power output and require no maintenance. ▪ Maximum material dimensions: 737 x 584 x 229 mm, but larger materials can also be processed as the front side is open. ▪ Working area: 610 x 457 mm ▪ Honeycomb cutting bed - minimizes contact between the material and the reflective engraving table and more efficiently removes particles and fumes generated during cutting ▪ Maximum supported material weight: 18 kg ▪ Machine dimensions: 914 x 965 x 914 mm ▪ Electrical connection: 220 – 240V / 5A The package includes the following optional features: ▪ BOFA filter, 400 m3/h air flow – allows use even in enclosed commercial spaces ▪ Focusing lens with a 2.0” (5.08 cm) focal length and 0.125 mm focal spot diameter ▪ HPDFO focusing lens + beam collimator. Focal length: 2.0” (5.08 cm), Focal spot diameter: 0.025 mm – Suitable for marking metals ▪ Rotary attachment included – maximum object diameter for rotation: 203 mm ▪ “Air-Assist” cooling and cleaning system – Delivers a clean air jet over the material surface to suppress flames and improve engraving/cutting quality. Also helps to clean the equipment’s optical components (mirrors + lens) ▪ Metal cone for directing airflow at 90 degrees onto the material ▪ Back-Sweep – hose for directing airflow at 45 degrees onto the material ▪ 2 bar pressure compressor – PICCOLINO brand, supplies clean air for the “Air-Assist” system ▪ ‘Laser Interface+’ operating software: user interface allowing for automatic or manual control over power, movement speed, laser pulses (PPI), and other system settings. Includes a materials database with predefined settings according to the processed material; simply select the material type from the list and the driver loads the optimal parameters for cutting/engraving. Settings for custom materials not in the standard database can be saved, stored, and loaded. To maximize processing efficiency, the interface can estimate the remaining time for engraving or cutting. ▪ Additional 1Touch Laser Photo software – for high-precision engraving, including for complex image engraving.

Year of construction: 1993, operating hours: 100 h, condition: used, functionality: fully functional, machine/vehicle number: 442714, Three-phase industrial generator sets with self-regulating alternator compliant with CEI 2-3 / IEC standards. Rated power 1100 kVA (880 kW) at 1500 rpm – 50 Hz operation. Units are installed on a steel base with containment system, independent control panel, and exhaust lines. Main specifications: Alternator Tessari EC 43 LA/4 Power: 1100 kVA Active power: 880 kW Rated current: up to 5000 A (depending on voltage configuration) Voltage: 127/220/254/440 V Cosφ: 0.8 Insulation class: H Year: 1993 The generator sets can be used for: Prime power generation Backup power supply Hfsdpfx Aboytc Dwsvjd Power supply for large industrial facilities