Yilmazmakina

Condition: like new (used), Year of construction: 2020, Maximum product dimensions (width) 400 mm Maximum product dimensions (height) 240 mm Maximum product dimensions (length) ∞ Cpodpfx Asyhp Nvsbueu Maximum coil dimensions (Ø x length) 350x700mm Infeed belt height 870 mm (with rollers) 830-910 mm (with feet) Machine dimensions (safety guards open) 2893x1340x1558 mm Machine dimensions (safety guards closed) 2893x1820x1980 mm Hourly production 3600 p/h The PRATIKA 56 MPS X2 is a servo-assisted automatic shrink wrapping machine, equipped as standard with the Side Seal device, a continuous seal with no length limitation, as well as Center Sealing and fully electric operation. This machine, suitable for packaging formats up to 400 mm wide and 240 mm high, has been improved in all mechanical and electronic components to achieve a production rate of up to 3600 pieces per hour (depending on product dimensions and the film used).

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: LP-S08-142F, overall weight: 2,500 kg, nominal power: 5 kW (6.80 HP), Equipment: documentation/manual, Speed: 10 - 30 bags/min, depending on bag volume the speed may vary from these figures. Bag types: Pre-made stand-up pouches, flat pouches Bag size: Width 180 - 400 mm, bag length 120 - 500 mm Sealing: Sealing with constant heat (special sealing bar) Bag magazine: Stacking magazine Change of bag width: Gripper sets can each be adjusted via a motor The machine is offered without dosing system A labelling system with thermal transfer printer can be integrated. However, it is not included in the offer. See separate offer (€ 7,400) Cpjdpfx Abeyg Hmcjusu Video available on request.

Condition: ready for operation (used), Year of construction: 2006, An automatic vacuum packaging machine Saccardo Arturo Figli with double chamber design is available. Sealing bars: parallel, number of bars: 2, bar length: 1300mm, max. lid internal height: 360mm, min. operating pressure: 5mbar, vacuum capacity: 2x540m³/h, pump type: PVR. Machine dimensions X/Y/Z: approx. 2700mm/1100mm/1300mm, weight: approx. 1000kg. On-site inspection is possible. Csdsygmbmspfx Abujpu

Condition: like new (used), The CS-Matic 100 is offered together with the matching infeed conveyor (Audion ACC2000/4, year of manufacture 2021). The machine runs fully electric—no pneumatics, no compressed air required—making it exceptionally quiet in operation. Packaging capacity: up to 4,200 packs per hour (depending on product size, package configuration, and film type) Conveyor speed: 10 – 30 m/min Maximum package height: 200 mm Maximum package width: 400 mm Maximum package weight: 30 kg Sealing length: 500 mm Maximum film size: 600 mm (center-folded – ø 350 mm) Compatible films: Polyolefin (up to 30µ), Polyethylene (from 15 to 80µ with optional PE sealing bar) Machine dimensions (L x W x H): 2,170 x 1,875 x 1,665 mm Machine weight: 715 kg - Automatic centering seal adjustment - Automatic control of sealing bar height - User-friendly LCD control panel, 7" color touchscreen - Storage and retrieval of process statistics (counters, package length measurements, real-time output, machine performance, irregular pack detection) - Electronically adjustable conveyor speed - Single pack/multi-pack mode - Continuous, fully electric 4.0 packer with 2 belts - Cross sealing bar with PTFE-coated sealing blade, controlled via inverter and encoder - Faulty package detection - Inverter and encoder controlled This system allows all operations to be managed simply and precisely. - Power and control section - Electronically controlled conveyor speed Csdeyfz H Iepfx Abuepu - Reduced power consumption

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Cpjdpeydqahjfx Abueu Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: excellent (used), Year of construction: 2015, 1 x PFM Pearl Flowrapper Year: 2015 Film width 270mm, jaw is double Cpsdpsydldnjfx Abusu Located in Melksham, Wiltshire

Condition: ready for operation (used), Year of construction: 2022, A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Cedpfoycwucox Abuspu

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Cpodex Utd Eepfx Abuou Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: used, Year of construction: 1994, total height: 2,000 mm, total width: 4,760 mm, total length: 1,050 mm, power: 2 kW (2.72 HP), Empty weight: 750 kg Cpsdpfsx Tcr Ajx Abuju

Condition: used, Year of construction: 1999, total height: 2,270 mm, total width: 2,250 mm, total length: 1,900 mm, Empty weight: 1.400 kg Codpfx Abex Tcqxeuepu Current frequency: 50 Hz Voltage: 400

Condition: good (used), functionality: fully functional, Bag packaging machine for flat film. The currently installed format is suitable for flat film with a width of 270 mm. The machine comes with two additional smaller formats. Cedpfx Absx Tawceuopu

Condition: excellent (used), Year of construction: 2008, operating hours: 15,000 h, functionality: fully functional, We offer this used Mesken Haule Jumbo Single bag forming, filling and sealing machine, year of construction 2008. There is a matco fully automatic wrapper and fanuc robot available also. Machine type number: 33-08-7245SC Construction year: 2008 year Country of manufacture: Holland If you have any questions or need more information, feel free to send us a message or give us a call. Conidtion is excellent. Cedpsx Sqwkofx Abujpu

Condition: used, Year of construction: 2001, Manufacturer: Klockner MediSeal Type: powder sachet filling line A – Bagging machine : Model : LA – 300 Year: 2001 Bag width: 50 mm mini / 300 mm maxi Bag length: 50 mm min / 250 mm max Volume per bag: 1 ml min / 120 ml max Output: min. 20 strokes/min – max. 100 strokes/min Packaging reel diameter: 600 mm Chuck diameter DIN 55470: 76 mm Machine dimensions: 150 x 200 (with packing reel) x 190 cm (without dosing system) Weight: 1,800 Kg Current format: double bag (70 + 70) x 120 Mould with cooling circuit B – Grouping machine C – Klockner cartoning machine :C - Encartoneuse Klockner : Csdpex R A Hhjfx Abuopu Model: P-700 Year: 2001 Operating mode: Cyclic Carton size : length: 75 – 200 mm width: 50 – 150 mm height 20-110 mm Production speed 15 – 70 cartons/minute GUK folding module Glue station: robatech    

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Codpjx R Alkjfx Abuepu Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: good (used), Year of construction: 2010, Professional packaging machine from a renowned European manufacturer. Suitable, for example, for packaging catalogs, magazines, and periodicals. The printed product is fed into the machine and detected by a sensor. It is then automatically conveyed through the machine and shrink-wrapped. The packaged product is discharged at working height via a conveyor belt. Technical Data: - Packaging output up to 1,200 products per hour. Cjdpfex Nhqvex Abuspu - 220-230 V / 50-60 Hz. - Forming shoulder machine. - Flat film of various thicknesses. - Transverse sealing seam / longitudinal back sealing seam. - Independent hot wire sealing bars (impulse sealing). - Electronic temperature control. - Machine mobile on castors, with locking function. Adjustment options / features on the display: - Piece and production counter. - Pressure for longitudinal sealing jaw. - Pressure for transverse sealing jaw. - Pressure for guide rollers. - Sealing time. - Temperature of sealing jaws during operation. - Temperature of sealing jaws in standby. - Film slack control. - Bag length. - Cycle start. - Locking time of counter-pressure rollers after product passage. Scope of delivery includes an operating manual with circuit diagram. The machine can be demonstrated under power.

Condition: good (used), Year of construction: 2008, Professional packaging machine from a renowned European manufacturer. Suitable, for example, for packaging catalogs, magazines, and periodicals. The printed product is fed into the machine and detected by a sensor. It is then automatically conveyed through the machine and shrink-wrapped. The packaged product is discharged at working height via a conveyor belt. Technical Data: - Packaging output up to 1,200 products per hour. - 220-230 V / 50-60 Hz. - Forming shoulder machine. - Flat film of various thicknesses. - Transverse sealing seam / longitudinal back sealing seam. - Independent hot wire sealing bars (impulse sealing). - Electronic temperature control. - Machine mobile on castors, with locking function. Cedpfxox Nhbzj Abuepu Adjustment options / features on the display: - Piece and production counter. - Pressure for longitudinal sealing jaw. - Pressure for transverse sealing jaw. - Pressure for guide rollers. - Sealing time. - Temperature of sealing jaws during operation. - Temperature of sealing jaws in standby. - Film slack control. - Bag length. - Cycle start. - Locking time of counter-pressure rollers after product passage. Scope of delivery includes an operating manual with circuit diagram. The machine can be demonstrated under power.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Csdpfx Abjx I Ecmeuopu Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Cpsdpsx I D Tkofx Abusu Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: used, For Sale: ULMA Ocean Shrink Wrapping Machine (2007) – Recently Out of Production We are offering a ULMA Ocean horizontal shrink wrapping machine, just taken out of production and in ready-to-use condition. This is a robust industrial shrink film packaging solution, ideal for high-speed packaging applications. The machine also includes a residual film rewinder for clean and efficient film handling. Key Features - Brand: ULMA Packaging - Model: Ocean - Year: 2007 - Type: Horizontal Flow Wrap Shrink Wrapper (HFFS) designed for shrink film packaging at high output rates. ([ULMA Packaging](?utm_source=)) - Industry Use: Originally developed for the frozen fish sector, but suitable for a wide range of products requiring shrink-wrapped finish. - Construction: Heavy-duty stainless steel and hygienic design for easy cleaning and operation in demanding environments. - Sealing System: Innovative oval motion cross sealing jaws for high-speed sealing and efficient product transfer. - Compact Footprint: Requires less than ~5 m² of floor space. Estimated Technical Specifications (Based on typical Ocean configuration and published ULMA data for this model type) - Packaging Speed: High output (machine is capable of high-speed operation depending on product and film type). - Film Type: Polyolefin shrink film suitable for robust, retail-ready packaging. - Film Width Capacity: Typically capable of handling standard industrial shrink film widths (consult for confirm). - Operation: Automatic horizontal feed with cross sealing and continuous shrink tunnel compatibility. - Hygienic/Clean Design: Built to minimize dust and facilitate washdown cleaning. - Additional Equipment Included ✔ Rest Film Rewinder – collects leftover film for improved workflow and reduced waste. Cjdpfsx Ic E Sex Abuepu ✔ Optional shrink tunnel interface for seamless shrink finishing. ----- Excellent choice for food producers, contract packers, or industrial lines looking for proven ULMA reliability with an efficient shrink-pack solution. Contact us for more details, photos, or to arrange a viewing. ----- Als je extra details wilt toevoegen zoals precieze product-afmetingen, snelheid in stukken/minuut of elektrische specificaties kun je me die info geven of indien beschikbaar de machine-tag/plaatjes sturen — dan werk ik de advertentie verder af.

Condition: used, Year of construction: 2006, Girsac net packing machine. Packing weight from 0.5 to 4 kg Cpodpfx Asx Evu Usbusu

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Cpjdpfsx Ectuex Abuju

Condition: refurbished (used), DL Packaging – Complete Powder Packaging Lines We build and install cost-efficient, hygienic, and accurate powder packaging lines. Our Second Life Machines offer the performance of new equipment at a fraction of the cost and with fast delivery. Cpodpfxox Dbq Ao Abuju Why choose our powder solutions? • High automation for maximum output and minimal labor • High filling accuracy with sensors that adapt to product and environment • Easy access & fast cleaning for minimal downtime • Strong technical support and durable wear parts Complete lines include: • SDX dosing system with custom auger screw • VFFS machine (pillow, block-bottom, doypack, stabilo bags) • Discharge conveyor, Turntables, • Cartoning/ Case packer solutions Suitable for powders from 5–30 kg (milk, coffee, spices, sugar, chemicals) with speeds up to 100 bags/min. DL Packaging – Reliable, hygienic and affordable powder packaging from A to Z.

Condition: refurbished (used), Year of construction: 2021, Project-related overhaul completed in 2020–2021. Originally built in 1991 and fully refurbished by DL Packaging in 2021. Now available again! Since the refurbishment, the machine has operated for only approx. 150 hours – available immediately. Included: FS 110 forming set for pillow bags, 110 mm width FS 180 forming set for pillow bags, 180 mm width Markem X65 TTO printer The machine can produce both pillow bags and block-bottom bags. Includes SDX, printer, and forming sets. Capacity: Cjdpfx Abex Dapwjuspu 50–80 bags/min, depending on bag format, film thickness, filling product, dosing system, and synchronization. Delivery time: On request. If you are interested in this machine, it will be modernized by DL Packaging according to your product and specific requirements.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 102075501_20, The machine has only been set up and tested – never put into production. Equipped with SDX dosing system. Includes format sets for 500 g and 1000 g sugar packaging. Cpedjx A Trijpfx Abuou

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The system was used for slightly moist and sticky pipe tobacco. It is therefore suitable for all free-flowing products, such as spices, nuts, seeds, gummy bears, and many other kinds of food products. 14-head multihead weigher with vertical form-fill-seal machine: Weigher: 14 heads, each with 1.6 L volume, 7-inch HMI, MCU control Working platform (1.9 m x 1.9 m x 1.8 m) including ladder and safety railing Z-type bucket elevator: product drop height 3.1 m, total height 3.6 m, 1.8 liter bucket volume Weighing range: 10 - 2000 g Accuracy: ±0.1 g 220V 50/60Hz 1000 W All made of stainless steel (304 SS) Form-fill-seal machine: 120 bags per minute Bag size: W 60-200 mm, L 60-300 mm Maximum film width: 420 mm With SIEMENS PLC control, SIEMENS servo motor, 3-line date printer, 120 mm wide bag former (optionally, we also have a 200 mm wide former, which can be purchased at extra cost), with vacuum and air extraction function for the bags Discharge conveyor for finished products Condition of the system: very good (used) Year of manufacture: 2023, very low operating hours Functionality: fully functional The system was purchased twice at the time due to a temporary increase in product demand. Demand fell again after a short time, so the machine is still almost completely NEW. Spare parts supply for this Chinese system is excellent and the machine runs extremely reliably! ALTERNATIVE to the form-fill-seal machine: We also have a can filling feed system, so the machine can be adapted to fill directly into cans instead of bags. This feed system was built by Wellmann Anlagentechnik GmbH. It can be purchased as an alternative to the form-fill-seal machine. The checkweigher shown in the picture is not included in the offer. Cpodpfsx Avllox Abuou The multihead weigher can also be purchased separately for €24,500.