Maricorte Lda

Condition: good (used), Year of construction: 2006, operating hours: 9,128 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain 530 i, workpiece length (max.): 1,250 mm, workpiece weight (max.): 2,000 kg, total height: 3,000 mm, total length: 6,000 mm, total width: 3,000 mm, table load: 2,000 kg, rotary table diameter: 1,250 mm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Machining Centre Travel Range: X axis 1,250mm / Y axis 880mm / Z axis 800mm / B axis -30° to +180° / C axis 360° Rotary Table Diameter: 1,250mm The machine is available immediately and ready for operation. 5-axis geometry is within manufacturer tolerances and in good condition. The main spindle needs to be replaced due to a worn taper. If required, the main spindle will of course be replaced before delivery. Overall, the machine is well-maintained and has been serviced regularly. In 2020, the machine underwent extensive overhaul, including replacement of the X/Y sliding cover. All functions have been tested, and all fluids have been replaced. The machine can naturally be inspected and tested at our site. Transport and installation can be arranged at an additional cost by agreement. Itjdpexpmttsfx Ag Non Chip conveyor / Coolant system / IKZ (internal coolant supply) NC universal milling head -30° to +180° Hand rinsing gun Heidenhain touch probe TS640 Oil/emulsion mist extraction unit Operating mode 4 (machining possible with door open at reduced feed rate)

Condition: used, Year of construction: 2016, Technical details: x-travel: 4000 mm y-travel: 800 mm z-travel: 1000 mm table surface area: 4.200 x 1.100 mm control: iTNC 530 HEIDENHAIN turning speeds: 20 - 12.000 1/min taper ISO: SK 50 rapid motion - x-axis: 80 m/min rapid motion - y-axis: 60 m/min rapid traverse Z-axis: 60 m/min tool change unit: 60 Pos. spindle drive: 48 / 74 kW total power requirement: 130 kVA weight of the machine ca.: 32 t dimensions of the machine ca.: 7 x 3,4 x 3,2 m 5-axis-simultan universal machining-center, NC-swivelling milling-head (B-axis), rigid table with 2 integrated NC-rotary tables (left and right), dia. 1.050mm (max. table load 1.200kg each), internal cooling device 40 bar, coolant 980l, paperfilter, chip conveyor, mode 4, el. handwheel, infrared touch probe TS 649, prepared for 3D quickset (software), dividing wall, twin table machining, DMG netservice, MPC, flush gun, internal air-blast, oilmist suction, prepared for NC-dividing device HOFMANN RW/NC 300 (left), approx. 34.000 switch on hours, 12.000 spindle hours Iedpfxsxn Su Hs Ag Netn *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Bar Machining Centre | elumatec SBZ 130 - 8-position tool changer turret with driven tools - Material support with automatic clamping system - Operator console with touch panel - Separate Rittal control cabinet with cooling unit - Safety enclosure with SICK light curtain system Inspection is possible at any time by appointment. Itsdpfxjxn Scwo Ag Nen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: elu | SBZ | Bar Machining Centre

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC profile machining centre | elumatec SBZ 131 - 8-position tool turret with driven tools - Material support with automatic clamping system - Operator panel with touchscreen - Separate Rittal control cabinet with cooling unit - Mesh enclosure, SICK light curtain system Itjdpfx Agoxn Sbmj Njn An inspection is possible at any time by appointment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: elu | SBZ | profile machining centre

Condition: ready for operation (used), Year of construction: 2005, Available immediately from CH location : 5 axes machining center Reiden Type Reiden BRF 1 Year of construction 2005 Spindle renewed in 2022 ( 28.000.-Euro ) CNC control Heidenhain iTNC 530 Electronic handwheel Table diameter 800 mm Table load 800 kg X axis 1200 mm Y axis 600 mm Z axis 700 A axis minus 180 pkus 180 degrees Isdpfxjxn Rzrs Ag Netn B axis minus 90 plus 90 degrees SK 40 Magazine 72 places IKZ 20 Bar Number of controlled axles 5 Power on the spindle 25 kw Spindle speeds 0 - 6300 rpm Feed x axis 20000 mm / min Feed Y axis 20000 mm / min Feed Z axis 20000 mm / min Coolant device Chip conveyor Weight 9 to At a price of Euro 36.500.---plus VAT ex location

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC Profile Machining Centre | elumatec SBZ 610 - Power: 30 kW - Control: Beckhoff CP7032 - with material feed, automatic end stop, downstream material buffer An inspection is possible at any time by appointment. Itodexn Nfcspfx Ag Non #Tags: elu | SBZ | Profile Machining Centre

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Bosch Rexroth, controller model: IndraMotion 10, rotary table diameter: 800 mm, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, short taper mount: 63 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis gantry-type machining center with 3,000 mm travel on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°. Turning package: Enables high-precision turning operations in combination with standard milling and facilitates both turning and milling in a single setup. Rotary table speed: 500 rpm. Iedpfx Agoxn Ikdj Njtn Rota S Plus 800 chuck by Schunk. The operating hours counter is defective.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,759 h, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 15000 Tool taper HSK-63 Number of axis 5 Iodsxn Dkmspfx Ag Notn Movement X-Axis Movement 3000 mm Y-Axis Movement 800 mm Z-Axis Movement 1100 mm This 5-axis Matec 30 HV universal machining center was manufactured in 2016. It features a 60-position tool magazine, 15,000 rpm spindle, and Heidenhain TNC 640 control. Additional highlights include a rotary table, spindle cooler, and an extensive cooling system with a 510-liter tank. If you are looking to get high-quality milling capabilities, consider the Matec 30 HV machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,965 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 6000 (-15000) Tool taper SK 40 (HSK-A63) Number of axis 5 Movement X-Axis Movement 2940 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 850 mm Itjdpfxjxnr Ito Ag Njn Z-Axis Rapid Traverse 30 m/min C-Axis Movement +/-100º Table Table load 1200 kg Tools Slots in storage 36 Max tool diameter 85 (with adjacent free slots 135 mm) Max tool length 400 mm Additional Equipment Machines comes with C-axis and a +/-100º b-axis head. This 5-axis AXA VHC 3-3000 S was manufactured in 2006. A universal machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2003, OMV Estrema 2100 High Speed 5-Axis Machining Centre (2003) with Heidenhain iTNC-530 Control, Travel X/Y/Z = 2100/1100/700mm, Table Size 2920 x 1200mm, 45 Tool ATC, Max Spindle Speed 30,000rpm, Spindle Taper HSK 50E, Rotary Table Size 800mm Diameter, Blum Laser Tool Setting, Max Spindle Speed 30,000rpm, Feed Rates Max 1200mm/min, Includes Various HSK Spindle Tools in ATC, Machine Weight 27100kg. CE Mark Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €1,550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Itodpfxexnm Uhs Ag Nen

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: Heidenhain iTNC 426, workpiece weight (max.): 9,000 kg, total height: 3,320 mm, total length: 9,660 mm, total width: 4,918 mm, spindle speed (min.): 11 rpm, spindle speed (max.): 2,500 rpm, The machine is currently disassembled and is undergoing refurbishment with the following scope of work: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the dedicated console balancing circuit - Milling head “O” – complete overhaul including replacement of gears - Replacement of the gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of the machine’s hydraulic circuits and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and the spindle motor - Repair and adjustment of Indramat drives - Overhaul of the electrical cabinet including control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of Heidenhain system cables and TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit - The machine will be fully functional and delivered with geometric accuracy documented by protocol - New machine paint in RAL 5005 and RAL 9010 color scheme. Technical Data Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Total table area: 1,000 x 4,000 mm Number of T-slots/table pitch: 7/140 mm Slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel (X): 4,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inner table edge: 80 mm Distance from vertical spindle axis to inner table edge: 100 mm Spindle taper: ISO 50 Retraction force of clamping mechanism: 16,100 N Horizontal spindle swiveling – bilateral: 180° Ijdpfxsxnkkas Ag Nstn Vertical spindle swiveling – bilateral: 180° Spindle head positioning: adjustable in 2.5° increments Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2,500 rpm Number of spindle speed steps: stepless Feed rate range: 1 to 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel distances Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Working spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool data Tool magazine: 46-position changer Number of magazine positions: 46 Max. tool diameter (all positions): 80 mm Max. tool diameter (some positions): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: approx. 9–12 sec, tool-to-tool Feed rates and rapid traverse Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control system: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-time: 82,797 h Itodexm Tx Dopfx Ag Njn Dimensions & weight Machine weight: approx. 12,000 kg Required space (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will likely be arranged via truck with a loading width of 3,000 mm.

Condition: used, Year of construction: 2005, travel distance X-axis: 8,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 3,300 mm, table width: 600 mm, table length: 8,930 mm, overall weight: 28,000 kg, spindle speed (max.): 15,000 rpm, space requirement length: 11,200 mm, space requirement width: 3,300 mm, CONTROLS .. CNC controls HEIDENHAIN ITNC 530 BASIC DESIGN .. basic design: moving column WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 8000 mm .. Y-axis travel: 700 mm .. Z-axis travel: 850 mm .. rotating range B-axis from: 90 ° .. rotating range B-axis up to: -90 ° .. distance of axis of horizontal spindle - clamping surface (max.): 1030 mm TABLE .. table surface (left-right): 8930 mm .. table surface (front-back): 600 mm SPINDLE / HEAD .. tool fixture: HSK A63 .. spindle revolutions (min): 30 /min .. spindle revolutions (max): 15000 /min .. tool fixture: HSK A63 .. drive power S6 40%: 30 kW .. spindle torque S6 40%: 143 Nm AXIS DRIVES .. traverse velocity X (max): 10000 mm/min .. traverse velocity Y (max): 10000 mm/min .. traverse velocity Z (max): 10000 mm/min .. rapid traverse X: 40000 mm/min .. rapid traverse Y: 40000 mm/min .. rapid traverse Z: 30000 mm/min TOOL MAGAZINE .. number of positions: 36 .. tool diameter max.: 85 mm .. - with free neighbour positions: 135 mm .. tool length max.: 400 mm .. tool weight max.: 10 kg .. tool changing time: 5 s ELECTRICAL SPECIFICATIONS .. mains power supply: 55 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 11200 mm .. space requirements -front/back-: 3300 mm .. total height: 3300 mm .. total weight approx.: 28000 kg ATTACHMENTS .. guideway covers: yes .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes X = 8000mm or 2x 3750mm pendulum stroke (vertical) - Internal cooling 40 bar - Coolant tank 800 liters - Belt filter Itjdpfjxm Rxhox Ag Nsn - 3 D radio measuring probe - Raising the machine table by 70mm - Table load 1200kg/m² - Machines currently in storage and no longer powered - 2 round tables with clamping cubes

Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm Itedpfjxmr Uwsx Ag Nen - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining - Operating mode 4 - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings - Optional fixators and tie rods - optional commissioning/installation - optional transportation

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque Iedpfx Agexmr Uqo Notn • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: good (used), Year of construction: 2004, Maho DMC 160 U Duoblock, year of manufacture 2004, Mill Plus control, X/Y/Z travel 1600/1250/1000 mm, double pallet 1,250 x 1,000 mm, spindle speed up to 10,000 rpm, SK 50 taper, 120-tool magazine, rack-type tool magazine, high-pressure coolant, chip conveyor, band filter, rotary table (C axis), horizontal/vertical head. Iedpfjxmhzajx Ag Notn

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Itsdpfoxmd Tlex Ag Nsn Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: used, Year of construction: 2003, x-travel 2.000 mm y-travel 1.000 mm z-travel 1.200 mm control TNC 430 Heidenhain turning speed range - main spindle 20 - 5.000 min/-1 transmission ratio 2 power capacity - main spindel 30 (100%) / 45 (40%) kW Torque 1.050 / 1.580 Nm tool taper HSK 100 Iodpfx Agoxmag Is Netn swivellable B: +/- 180 ° indexing B: 0,001 ° table surface area 1.000 x 2.000 mm max. table load 4.000 kg flute distance 100 mm T-slots 18 H7 number of T-slots 10 number of toolpositions 40 pos. tool taper HSK 100 tool changing time 10 sec max. tool diameter 250 mm max. tool length 400 mm max. tool weight 20 kg feed speeds X,Y,Z: 0 - 20.000 mm/min feed speeds B: 10 1/min output X,Z: 15,7 / Y: 8,5 kW output B: 2,5 kW feed power 22'500 N weight of the machine ca. 23 t dimensions of the machine ca. 8,0 x 8,0 x 3,3 m 4-Axis CNC Machining Center - Universal REIDEN - BFR 22 - incl. 2x tool cabinets for collets - incl. 3x pull-out cupboards - incl. 1x workbench - incl. Ringler chip extractor

Condition: excellent (used), Year of construction: 2023, 5-Axis Machining Centre Brand: DMG MORI Model: DMF 300/8 Year: 2023 (1,600 spindle hours) CNC: Heidenhain Celios iTNC640, 21.5'' screen Equipped with: • Integrated rotary table diameter 800 mm / 800 kg • Spindle 46/30 kW – 15,000 rpm • 90-position tool changer • LEHMAN EA520 rotary indexer with tailstock • BLUM LC50 laser • PP60 Infrared probe • Through-spindle coolant 40 bar • Central paper filtration unit 980 litres • Automatic doors • Chip conveyor Specifications: • Table size: 3,300 x 850 mm • X-axis travel: 3,000 mm • Y-axis travel: 800 mm • Z-axis travel: 850 mm • B-axis: -/+110° • C-axis: 360.000° • Spindle speed: 2 - 15,000 rpm • Spindle power: 46/30 kW • Spindle taper: SK 40 Big Plus • Rapid traverse X/Y/Z: 50 m/min • Machine dimensions approx.: 11,150 x 6,500 x H 2,650 mm Iodpfoxl Ufcsx Ag Njtn • Weight approx.: 23,500 kg

Condition: excellent (used), Year of construction: 2004, CNC Machining Center Helme U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 With HSK 63 and swivel axis Technical data: Traverse paths (X, Y, Z): 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool changer - number of positions: 28 -ICS (internal coolant supply) -Controlled B-axis in the milling head -Tool measurement -Chip conveyor Itsdpfx Agexl R His Njn

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: C121170, travel distance X-axis: 3,000 mm, travel distance Y-axis: 274 mm, travel distance Z-axis: 390 mm, rotational speed (max.): 20,000 rpm, spindle motor power: 4,000 W, For sale: furniture assembly line, total length 42 meters, with conveyor belt 70 cm wide. Iedpoxl Rx Ssfx Ag Notn

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model iTNC530 HSCI Main Drive Spindle speed range 20-28000 rpm Spindle motor power 55/43.5 kW (40/100%DC) Movement X-Axis Movement 1050 Y-Axis Movement 800 Z-Axis Movement 560 Additional Equipment Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Itjdpfxjxl H Enj Ag Njn This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2016, operating hours: 26,678 h, functionality: fully functional, This machine is available exclusively through Montrasio GmbH and is being sold on behalf of the authorized parties. DMG DMU 100P duoBLOCK – 5-Axis CNC Machining Centre (2016) Year of manufacture: 2016 Control: SIEMENS CELOS Travel / Capacities X-axis: 1,000 mm Y-axis: 1,250 mm Z-axis: 1,000 mm Workpiece diameter: 1,100 mm Workpiece height: 1,600 mm Workpiece weight: up to 2,200 kg Isdpfxoxl Arko Ag Njtn Table / Axes Table size: 1,100 × 900 mm Table rotation speed: 35 rpm Max. table load: 2,223 kg B-axis universal milling head swiveling range: −30° to +180° Spindle / Tool Spindle speed: 0 – 12,000 rpm Spindle motor power: approx. 69 HP (≈ 51.5 kW) Spindle taper: HSK-A100 Tool magazine: 63 positions Machine Dimensions Footprint: approx. 24 m² Machine height: approx. 3,606 mm Machine weight: approx. 24,540 kg Accessories / Equipment CNC-controlled universal milling head (B-axis) Workpiece probe Tool measurement system 3D Quickset Chip conveyor

Condition: new, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS 828D, controller model: SIEMENS 828D, spindle nose: SK50 DIN69871, TECHNICAL SPECIFICATIONS: Travel: - X-axis travel: 1500 mm - Y-axis travel: 800 mm - Z-axis travel: 700 mm Table: - Table dimensions: 1600 x 800 mm - Spindle-to-table distance: 160–860 mm - Maximum table load: 1500 kg - Number / Pitch / T-slot size: 22T x 7 x 110 mm Ijdpfsxlyzvsx Ag Nstn Accuracy: - Repeat positioning accuracy: ±0.005/300 mm - Positioning accuracy: ±0.005/300 mm Spindle power 18.5 kW: - Standard spindle speed: 6000/8000 rpm (optional) - Spindle motor power: 18.5 kW - Spindle drive type: Belt drive - X/Y/Z axis drive: Direct drive - X/Y/Z axis motor power: 4.5/4.5/4.5 kW Automatic Tool Changer: - Tool capacity: 24 - Tool holder type: SK50 DIN69871 - Maximum tool weight: 15 kg - Maximum tool diameter: 200 mm - Maximum tool length: 300 mm

Condition: used, Year of construction: 2018, CNC machining center ELUMATEC SBZ 607 equipped with 11 tool stations (9 motors + 2 screwdrivers), designed for all main standard machining operations on window and door profiles. It enables milling operations such as drainage slots, lock cases, recesses for mounting plates, ventilation holes, as well as drilling for reinforcement brackets, transoms, tilt-and-turn locks, pins, and accessories. It is also prepared for free-form milling of gasket grooves and marking of closing components. Technical specifications: Isdpfxjxltxhj Ag Njtn Tool stations: 11 Maximum profile length: 4,000 mm Maximum profile depth: 400 mm Spindle speed: 24,000 rpm Perfectly suited for the complete processing of aluminum or PVC profiles, ideal for window and door manufacturers or industrial producers.