Emektar Makina

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Nodpfxozn A Epo Am Tocw

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, Nedpfx Aoznngxem Tjcw * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop Ncedpfxszndq Ts Am Tsw - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: used, Year of construction: 1981, total length: 3,700 mm, total width: 1,800 mm, total height: 1,600 mm, Colour: Green Weight: 4.500 kg Ncedpfx Amezm Urxj Tjw - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 810196 - Drive system: Conventional - Drive type: Hydraulic - Configuration: Guillotine - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3700mm x 1800mm x 1600mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, The cutting tool can be used with 4 different attachments, with 2 currently in use. Manufactured in Germany. Njdpezmyyzefx Am Tjcw

Condition: used, Hydraulic Shear SAGITA BEYELER Capacity: 3100 mm x Max thickness 4 mm Nedpfxezmwn Nj Am Tjcw Electric Back rear stop travel: 800 mm Voltage: 380 V Length: 4000 mm Width with part support: 3700 mm Width without part support: 2000 mm Total height: 1500 mm Weight: approx 5 T

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Sheet metal shearing machine LVD CS 06/31 Manufacturer: LVD Type: CS 31/6 Year of manufacture: 9/2022 Njdpfxozmimqj Am Tecw Condition: used, like new Further information available upon request.

Condition: used, LVD MVS 5050 × 6 – Technical Specifications: Ncjdpfszmam Isx Am Tsw * Maximum sheet thickness: 6.35 mm * Maximum cutting length: 5,050 mm * Back gauge range: 750 mm * Adjustable cutting angle: 0.5° – 2.5° * Adjustable blade clearance: 0.05 – 0.7 mm * Strokes per minute: 12 – 45 * Main motor: 15 HP (approximately 11 kW) * Machine weight: 12,000 kg * Power supply: 230 V

Condition: used, Max. cutting length: 2540 mm Nsdpfszl Dr Sex Am Tscw Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop (2 speeds) up to 1000 mm with analog display Side stops and table extensions cutting length limitation Cutting edge lighting knife sharpened Weight approx. 5500 kg

Condition: good (used), Year of construction: 1993, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t Ncjdpfxjzly Hxs Am Tsw

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information Nedpfozly Eujx Am Tscw - Specification - Back stop - Roll shelf

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Colour: Cream Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg Ncjdpfezlytljx Am Tow - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: ShearOne H3000-6_14, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 7,000 kg, total length: 2,700 mm, total width: 4,500 mm, total height: 2,100 mm, warranty duration: 36 months, travel distance X-axis: 1,000 mm, cutting length (max.): 31,000 mm, cutting width (max.): 3,100 mm, Equipment: safety light barrier, Hydraulic guillotine shear ShearOne H3000-6 from CoastOne in Finland Cutting length - 3,100.0 mm Ncedpfx Aozlhhksm Tsw Sheet thickness 400 N/mm² - 6.0 mm Sheet thickness 700 N/mm² - 4.0 mm Cutting angle ° - 0.5 - 2.0 Back stop - 1000 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ncsdpfszk Dzdox Am Tew Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge depth: 1,000 mm MACHINE DETAILS Power: 11.0 kW Control system: Conventional Control system manufacturer: Elgo Drive type: Hydraulic Dimensions & Weight Overall length: 6,400 mm Weight: 17,500 kg EQUIPMENT Documentation Sheet support system: Pneumatic Angle adjustment: Motorized Back gauge type: Electric

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Ncodezi Uq Hjpfx Am Tew Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Capacity: 3100 x 6 mm Nsdpfx Amjzi Rl Ts Tscw Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Technical data Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection Njdpfx Amszi Ezvo Tecw All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Nedpsziviwjfx Am Tecw

Condition: new, Hydraulic plate shear Fintek Type/Model: TS 2080 x 6.5 Condition: New Exclusive: Trade fair machine EURO-Blech Hannover 2026 Compact hydraulic plate shear, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the positioning and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving the hands free to align the workpiece. Technical data Cutting length: 2080 mm Sheet thickness: 6.5 mm Strokes/min: 24 - 36 Number of clamps: 12 Clamp pressure: 5.6 t Front support arms: 1000 mm Rear stop: 600 mm Cutting angle: 1/2 - 2° Motor power: 11 kW - High-quality, high-alloy shear blades with a high chromium content, suitable for stainless steel - Upper blade 2-edged, lower blade 4-edged - Hydraulic cutting angle adjustment ensures a clean, low-distortion and precise cut at any sheet thickness - Manual cutting gap adjustment (models from 4.5 mm and larger) - Excellent visibility of cutting lines via LED with shadow projection Njdpfjzh Uuiex Am Tocw - High number of strokes per minute ensures fast operation - Generous support arms with adjustable stop - Side stop with double scale (metric/imperial) - Feed work table with ball rollers for effortless movement of the sheet - Continuous front guard - Hydraulic, independent clamps ensure perfect clamping of the sheet at all times, regardless of the degree of wear of the clamps, by applying the same pressure (no slippage or dragging of the sheet during cutting) - Manual rear stop 600 mm - Overload-protected hydraulic system - Mobile control panel with safety foot switch and emergency stop button - High performance and reliability - Various options available, e.g. small parts diverter, NC-controlled rear stop with intuitive control via touch screen, angle stop, sheet lifting device, etc. - Current CE conformity Options: - Pneumatic sheet lifting device with: - Selector switch for sheet return on the operator side or the rear of the machine - Integrated rollers for even and smooth removal of the cut material - Increased motor power for more strokes/min - Rear stop with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC rear stop 800 mm controlled via ball screw using M15S or FATEK control Inquiry item! Shipping costs in individual offer.

Condition: used, Edwards Pearson Hydraulic Guillotine 4m, model V.E. SHEAR 6.5/4080, Ncjdpfezh Rfqjx Am Tsw

Condition: good (used), Year of construction: 2005, sheet width 2560 mm Nodpezh N U Refx Am Tocw plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2600 mm down holder 15 Stück no. of strokes max. 24 Hub/min oil volume 120 ltr. cutting angle 1.6 ° back stop - adjustable 750 mm Control PRG 911-1 Number of working hours ca. 370 h total power requirement 11.0 kW weight 4700 kg range L-W-H 3190 x 2100 x 1560 mm with only approx. 370 operating hours (!) Features: - Robust electro-hydraulic oscillating shear - Digital position display for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side stop * With T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms - Electric cutting length limiter * Cutting length limiter to increase strokes per minute - Manual cutting gap adjustment * centrally operated on the left side stand - front support plates - front finger/interference guard - jog mode with push buttons on the control panel - protective guard = safety device behind the machine - operating instructions (PDF)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, HYDRAULIC SHEAR LVD HD CS 31x13 Serial number: 34887 Year of manufacture: 2007 TECHNICAL SPECIFICATIONS Max. sheet thickness (St45): 13 mm Cutting length: 3100 mm Range of back gauge: 750 mm Min. cutting angle: 0.5° Max. cutting angle: 2.5° Nedozg Dp Tepfx Am Tscw Min. number of strokes/min: 7 Max. number of strokes/min: 35 Min. blade clearance: 0.05 mm Max. blade clearance: 2.2 mm Motor power: 15 kW Weight: 8700 kg OPTIONS: Electrical adjustment of back gauge (1000 mm) with digital readout. Electrical adjustment of cutting angle. Adjustable blade clearance. With 90° square arm front support. Foot pedal. CE safety standards.

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Nsdpfozgu Rbex Am Tecw Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Ncodpfezdzkcjx Am Tjw If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker design: hydraulic cutting length: max. 3.000 mm cutting length (stackable): max. 1.000 mm cutting thickness: max. 6 mm Ncjdpfxjzdnx Hj Am Tow