Falmac S.r.l.

Condition: used, Machine for longitudinal and transverse profiling of parquet. Motors 6+6. Bsdpfx Asy Hmlyjl Islg

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) Blodpjy Hb Uijfx Al Ijg MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space Blsdpfx Asyz Si Hjl Ieg

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Bsdpoyz Siaefx Al Ijlg Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: used, Year of construction: 1990, Double tenoning machine with 3+3 motors, equipped with protective and soundproof cabins, 6-metre opening. Bodpfx Aljyzralo Ijlg

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations) Bjdpfx Aloyyy Dve Islg

Condition: excellent (used), Catalogue number 6462 TECHNICAL DATA - 2.2kW motor - 380V power supply - Head traverse motor 0.9kW - Extraction port diameter 2x100mm - Dimensions (L/W/H): 1330x1100x1220mm - Weight: 920kg Machine equipped with: – 2 tables with angle stops, size 385x330mm – 2 pneumatic clamps – Tables angle-adjustable in two planes – Capability for machining longitudinal and round tenons on the tables – Height-adjustable tables – Tenon width adjustment – Central lubrication – Unpainted – Made in Italy Blsdeyyyk Nepfx Al Ieg – Used tenoning machine, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system Bjdoywxraspfx Al Iolg 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: used, functionality: fully functional, Equipment: documentation/manual, Torwegge Double-End Tenoner, Year of Manufacture The machine offered is being sold as a used unit. The sale is made with exclusion of any liability for material defects. The machine is sold as inspected, with any and all warranties excluded. Bsdsywfirepfx Al Ijlg The seller does not provide any guarantee regarding functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine is the responsibility of the buyer, at their own cost and risk. The buyer assumes all costs and risks associated with removal, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest upon commencement of dismantling or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g. year of manufacture, operating hours, technical specifications) is provided to the best of our knowledge, but without guarantee.

Condition: excellent (used), Year of construction: 1980, 1 x AUTOMATIC DOUBLE END TENONER SPANEVELLO Model STDL with 3 + 3 spindles TECHNICAL DATA: - Working width: 170 – 3000 mm - Workpiece thickness: 5 – 120 mm - Top pressure beams with drive belts and clutch - Bottom feed chains, 70 mm width - Automatic lubrication of bedplates - Automatic lubrication of feed chains Bedpfx Aeyurqpjl Ielg - Dogs distance: 340 mm - Variable feed speed: 1.5 – 20 m/min - Power supply: 380V / 3ph / 50 Hz MACHINE EQUIPPED WITH: - Left-hand adjustable infeed side fence – manual horizontal adjustment Jump Cutting/Scoring Units 1-2: - Motors: 1.5 HP – 3000 RPM - Shaft diameter: 35 mm x 55 mm length – Max. tool diameter: 200 mm Hogging/Milling Units 3-4: - Motors: 5 HP – 3000 RPM - Shaft diameter: 40 mm x 55 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 140 mm - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout Milling Units 5-6: - Motors: 5 HP – 3000 RPM - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout - Shaft diameter: 40 mm x 95 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 120 mm Machine in good working condition. Tested in our workshop prior to delivery.

Condition: used, functionality: fully functional, Equipment: documentation/manual, CELASCHI CL DOUBLE LINE Bjdeyt Ibuopfx Al Iolg

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, working width: 2,000 mm, total length: 6,000 mm, overall weight: 3,000 kg, cutting height (max.): 35 mm, TECHNICAL DETAILS Working width min.: 520 mm Bodpfx Alsyttdhe Ijlg Working width max.: 2,200 mm Cutting height (max.): 35 mm Maximum passage height at existing milling cutters: 35 mm Feed speed: not adjustable (fixed setting, value not specified; estimated at approx. 8–10 m/min) MACHINE DETAILS Type of input power: Alternating current (AC) Dimensions & Weight Dimensions (L x W x H): 6,000 x 4,000 x 3,000 mm Weight: 3,000 kg EQUIPMENT Soundproof cabin Five processing axes per side, mechanically adjustable

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes Bedpfxeyk Empe Al Ijlg • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: used, Year of construction: 1985, functionality: fully functional, working width: 2,000 mm, total width: 4,000 mm, total length: 6,000 mm, total height: 3,000 mm, overall weight: 3,000 kg, cutting height (max.): 35 mm, type of input current: AC, space requirement height: 3,000 mm, IMA double-end profiler with five machining axes per side. All axes are mechanically adjustable. Infinitely variable feed rate. Sale includes soundproof cabin. Ex location, self-dismantling. Blsdpfxeyf Ek Rs Al Ijg

Condition: used, functionality: fully functional, Tenoning machine by SAUTEREAU in excellent condition Bledjx U U Irepfx Al Isg

Condition: good (used), PARVEAU 900 Tenoning Machine -Circular saw, 400mm diameter Passage height: 150mm Motor power: 3HP -2 rollers, 160mm diameter Roller motors: 3HP each Maximum tenon length: 130mm Top of tenon to table feed: 0 to 150mm Max feed from one roller to the other: 60mm Blodpjx U S Ayjfx Al Iog -Spindle moulder, max diameter: 350mm Spindle moulder motor: 10HP, 3000 RPM, 160mm diameter, 125mm width -Shoulder cutting unit Tooling included

Condition: excellent (used), CATALOG NUMBER 6024 TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down – Tenon width adjustment Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change) Bjdpex R Dv Rofx Al Iolg

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Bjdpfx Aox R Du Hsl Iolg Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3458 F, working width: 2,500 mm, Double tenoner FRIULMAC 2003, 3+3 heads Bsdpfex Rdrfex Al Ijlg

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3928 A, working width: 250 mm, Equipment: documentation/manual, Motor Power: 30 kW Equipped with: Hnebni Iow A A E Is Rp Tot 1+1 saws 1+1 milling unit 1+1 drilling unit Max length: 1000 mm Max width: 250 mm Blsdpfjxix Tfex Al Iog Max thickness: 50 mm double end tenoner, double drilling, step by step

Condition: good (used), functionality: fully functional, number of engines: 4+4 opening: 6 meters Bodpfx Alow D Nq Tj Iolg

Condition: good (used), functionality: fully functional, double tenoner, double drill, step by step Equipped with: 1+1 saws 1+1 milling group Bjdpfx Asw A A E Ijl Iolg 1+1 drilling group Max length: 2500 mm

Condition: good (used), Year of construction: 1993, functionality: fully functional, SCM D 80 K double tenoning machine, year 1993, hood on the left. Available for viewing at our premises. Machine price includes loading onto truck. Installation and commissioning at your workshop available at extra cost. Bledpfx Ajw Avh Njl Isg

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. Bljdpewzmbqefx Al Isg X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: used, machine/vehicle number: 007960, Squaring: First and Second Pass Max feed speed: 36 m/min Bsdpfx Aswl Dnijl Iolg Distance between dogs: 450 mm