MTO Metalltechnik Ostalb

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Hfslhccqozly S Ijtji Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: good (used), Year of construction: 2017, machine/vehicle number: V380C0102, I am selling a slightly used machine. Hjlhezlx Hdeccqtofi

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 2,360 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 300 mm, total height: 2,914 mm, total width: 2,457 mm, overall weight: 3,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 5,500 W, product length (max.): 3,679 mm, number of axes: 3, This 3-axis PAVONI V2400 Open Top was manufactured in 2011. It features an X-axis travel of 2360 mm, Y-axis travel of 1800 mm, and Z-axis travel of 300 mm. The machine is equipped with a powerful 7.5 HP spindle and operates at speeds ranging from 1000 to 12000 RPM. If you are looking to get high-quality machining capabilities, consider the PAVONI V2400 Open Top vertical machining centre we have for sale. Contact us for further details. - Working Hours: very low, used for only a few hours- Control Console: TexComputer control console- Spindle Power: HP 7.5- Spindle Speed Range: 1000 - 12000 RPM- Control Console Dimensions (LxWxH): 400 x 600 x 1600 mm- Standard Equipment Included:- Tool holders, milling, grinding, and polishing tools- Vacuum units / suction cups- Rollaway pneumatic supports- Supports with eccentric rollers for sliding glass plates- Laser crosshair aiming system for zero-points- Anti-splinter drilling support- Separate Data Input Computer: Included but never properly configured (not fully functional)- Operational Status: Powered on and fully functional; needs maintenance checks since it hasn't been serviced in a long time Helhozlq T Asccqtjfi Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, nominal power (apparent): 12 kVA, controller model: Penta-Tec, overall weight: 6,000 kg, spindle speed (min.): 140 rpm, spindle speed (max.): 2,200 rpm, number of slots in tool magazine: 10, We are offering this used BAUER Bohrmax Z40 vertical machining center, manufactured in 2018. Manufacturer: BAUER Model: Bohrmax Z40 Year of manufacture: 2018 SCOPE OF DELIVERY / TECHNICAL DATA: • Spindle speed range: 140-2200 rpm • Drive for X, Y, Z axis: Servo motor • Rapid traverse X-axis: 20 m/min • Rapid traverse Y-axis: 6 m/min • Rapid traverse Z-axis: 6 m/min • Distance from top of table to bottom of tool holder: 700 mm • Tool holder: SK40 • Tool changer for 10 tools • T-slots: M 12 • Drilling diameter: 3-32 mm Hfjlhccqozlp T Istei • Thread drilling: M 4 - M 24 • Tolerance X-axis: ± 0.1 mm • Tolerance Y and Z axes: 0.06 mm • Drive motor for spindle: 7.5 kW • Light curtain at the front • Control system: Touchscreen 18” • Chip conveyor with slat conveyor Optional extras: • Automatic tool length measurement • Handheld control unit RCS01 • Software extension for pendulum operation + DXF package • Hydraulic clamping system (8 clamping points) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 77,374 h, functionality: fully functional, machine/vehicle number: 419-01, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, controller model: Siemens 840D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2021 (spindle operating hours approx. 7,300 h)! The machine underwent a general overhaul in 2013! The machine has been continuously maintained and repaired annually by the manufacturer, and kept up to date with the latest technology (preventive maintenance). The last maintenance was carried out in January 2024. TECHNICAL DETAILS Travel distance X-axis: 6,000 mm Travel distance Y-axis: 630 mm Spindle speed: 12,000 rpm Spindle torque: 140 Nm Rapid traverse rate in X/Y/Z: 60 m/min Chip-to-chip time vertical: 3.0 sec. (3.3 sec. DIN) Chip-to-chip time horizontal: 4.7 sec. (5.0 sec. DIN) MACHINE DETAILS Control system: Siemens 840D Type of power supply: 3/N/PE Mains frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 220/24 V Connected load: 52 kVA Rated current: 75 A Fuse rating: 80 A Weight: 19,500 kg Operating hours: 77,374 h Hfjlhcozlnm Hocqtoi EQUIPMENT 5-axis milling package Scraper belt conveyor, discharge height: 1,050 mm Coolant-through-spindle (CTS) preparation Vacuum rotary filter KNOLL VRF250 (steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HD pump and variable valve Cooling nozzle per oscillating table Emulsion mist extraction, 2 extraction fans at 800 m³/h each Rotating viewing window on the left and right (1,400 mm from the center of the machine) Automatic loading doors Center partition for oscillating machining 92 tool positions HSK-A63 (rear magazine) Compressed air blow Tool life monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (status: machine on, machine running, piece counter) Marposs (Brankamp) collision monitoring CMS100 3D machine model for kinematic simulation in the CAM programming system Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per oscillating table, clamping pressure control Linear clamping system KOHN 8 hydraulic clamping blocks KOHN Multi 2000 MFS 125/680 HD Two-part grating platform for the operator across the entire operating width of 6,000 mm

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: KMM 540.1196, travel distance X-axis: 3,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 15 M, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 550 mm Hfjlozlfqcshccqtei Travel range, Z-axis: 550 mm MACHINE DETAILS Control system: Fanuc 15 M Rotary axis: Fibro NC1

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,320 h, travel distance X-axis: 2,030 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, table load: 3,000 kg, overall weight: 14,600 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis TAJMAC-ZPS MCFV 2080 vertical machining center was manufactured in 2019. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this TAJMAC-ZPS MCFV 2080 vertical machining center. Contact us for more information. Holezlc Aijhccqtsfi • Tool Magazine: 24-tool • Table Dimensions: 2200x780mm • chip conveyor Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2011, 2011 CMS Ares 48/18-New PX5 CNC 5-axis High-Speed Machining Centre Hfslhccozk I Tdsqtei Table Dimension 4,870 x 1,360mm. Axis Travel 'X'=4,800mm, 'Y'=1,800mm, 'Z'=1,200mm. 'B'=±120°, 'C'=±270°. Rapid Traverses 'X'=80m/min, 'Y'=80m/min, 'Z'=70m/min, 'B'=9,000°/min, 'C'=9,000°/min. Maximum Spindle Speed 24,000rpm. 8 Position ATC. Spindle Taper HSK 63. S/No. 5790.

Condition: used, Year of construction: 2010, For sale is a Hedelius C50 vertical CNC machining center, manufactured in 2010. Helszk Etnehccqtjfi This machine comes from the ongoing production of a German industrial company and is in well-maintained condition. Hedelius machining centers enjoy an excellent reputation for precision, reliability, and efficiency and are particularly in demand in general mechanical engineering as well as in tool and mold making. An inspection while the machine is running can be arranged on short notice. Technical data: Travel in X: 1,800 mm Travel in Y: 530 mm Travel in Z: 510 mm Table size: approx. 2,100 × 530 mm Heidenhain CNC control Tool magazine Spindle speed: up to 8,000 rpm. Further information, technical data, operating hours, and extensive images are available upon request. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,000 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 550 mm C-axis rotation: 360° Table length: 2,600 mm Table width: 550 mm Tool holder: ISO40 Main spindle power: 22 kW Spindle speed: 20 - 12,000 rpm Hjlhcjzk Dv Uocqtefi Positioning accuracy: 0.01 mm Travel speed: 667 mm/s Number of axes: 4 MACHINE DETAILS Control system manufacturer: Siemens Power consumption: 24 kW Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,700 x 2,500 mm Net weight: 9,600 kg Shipping packages: 2 EQUIPMENT Tool magazine External cooling Chip conveyor CE marking

Condition: used, travel distance X-axis: 2,400 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, C.B. Ferrari Machining Center Model: S 72 -E 3 Axes Travel: 2400 X 700 X 700 ISO 50 Spindle Interface Spindle Speed: 2500 RPM Hfjlhezkvptsccqtji Internal Code: NA 01

Condition: ready for operation (used), Year of construction: 2004, Make: AXA Type of machine: VHC 2-4000 M/E Year of manufacture: 2004 Control system: Heidenhain TNC 430 Machine's weight: 19.500 kg Tool holder: SK 40 DIN 69871 A spindel speed: 6.000 U/min x-travel: 4.000 mm y-travel: 600 mm z-travel: 800 mm Speed range: 30–6.000 U/min Spindle lock: SK40 Operating time: 28.060 h Chip removal device: Ja Cooling system: Ja Tailstock: Ja (MK4, manuell) Chuck size: 400 mm (RTA 3-400) Traverse Z-axis: 800 mm Table dimensions: 4.440 × 600 mm Number of tools in the magazine: 36 Clamping assembly: SK40 Holhozkr S Reccqtofi 3D Measuring probe: Ja (Renishaw MP10E) : Nein : Ja (Schwenkkopf ±90° / Teilung 1°)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Vertical machining center Hslhezkg Uysccqtefi Manufacturer: Johnford / Matra Model: FMC 850 Year of manufacture: 1999 Hours: see image - 24-tool changer with double gripper - Table size: 1000x500mm - Spindle speed: 8,000 rpm - Travel: 800x450mm - Fanuc Oi control system - Machine is in working order and can be inspected while running.

Condition: good (used), Year of construction: 2000, Vertical machining center Hfelhszkbt Roccqtji Machine type: Hartford HB-120 W Control: Mitsubishi Meldas control ( G-code programmable) Year: 2000 SPECIFICATIONS Travel X-Axis: 2.000 mm Y-Axis: 1.200 mm Z-Axis: 500 mm Spindle speeds: 50 - 4.000 rpm Spindle motor: 15 kW Tool: ISO 50 Tool capacity: 20 Table size: 2.100 x 1.200 mm Max. Table Load: 2.500 kg

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm Helhccezka Hijqtefi MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Hfelhccqozka Akstsi Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, spindle speed (max.): 18,000 rpm, Submitting a bid commits you to collecting the item by July 27, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,600 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 820 mm B-axis: -100 to +100 degrees Spindle speed max.: 18,000 rpm Taper: HSK-A63 Power: 0.8 - 25 kW Tool magazine: 30 slots Tool weight max.: 6 kg Tool length max.: 250 mm Tool diameter max.: 100 mm Tool diameter with empty secondary position max.: 130 mm Total weight of all tools max.: 180 kg Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Feed rate X/Y/Z max.: 20,000 mm/min Table size: 4,200 x 900 mm Table load: 4,200 kg T-slots: 9 with a center distance of 100 mm MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Hfolhccezkapksqtsi Operating hours (according to the latest service report) Operating hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT 5-axis machining with NC swivel milling head (B-axis) Linear drive in the X-axis

Condition: used, Year of construction: 2007, Mazak VTC-300C-II CNC Vertical Machining Centre with Mazatrol 640m CNC Control. S/No. 192125 (2007), Table Size 2000mm x 770mm, 30 Tool ATC with Quantity of Tooling Fitted, 12000rpm Spindle Speed, BT40 Spindle Taper, FSE Swarf Coolant System, (2) x Filtermist FX7002, Oil Mist Filter Extractors, Renishaw OMP 60 Probe & RMI Eye, Machine Weight 11500kg. Country of Origin: United Kingdom Helhccqszi Tl Aotjfi Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2022, Mazak VTC 820/20 CNC Vertical Machining Centre with Mazatrol Smooth G Touch Screen CNC Control. S/No. 323190 (2022), Table Size 2500mm x 820mm, Spindle Speed Max 18,000rpm, CAT40 Spindle Taper, 30 Tool ATC Fitted with Various Tool Holders and Renishaw Probe, Cromar Series IV Swarf Coolant System, CIL 1501 Chiller Unit, Clara 3nine Oil Mist Filter Extractor, Machine Weight 14,000kg. Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK Hfolhozi S Shjccqtei

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 Hfolhccqozi A Sfotji CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2012, Vertical machining center Machine type: DMG DMF 180 / 7 Control: Siemens 840 D solutionline Year: 2012 SPECIFICATIONS Travel X-Axis: 1.800 mm Y-Axis: 700 mm Z-Axis: 700 mm Feed: (X/Y/Z): 40 m/min. Rapid motion: (X/Y/Z): 40 m/min. Spindle speeds: 20 - 14.000 rpm Spindle motor: 18,9 / 14 kW Tool: SK 40 Tool capacity: 30 Hfelhezizccoccqtei Table size: 2.100 x 700 mm Max. workpiece weight: 1.500 kg Workpiece thickness: 550 mm Power consumption: 19 KW Req. space (LxBxH): 5,533 x 4,231 x 2,693 m Machine weight: 13.000 kg Equipment Chip conveyor

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling Hfjlhcjzilp Tocqtei 4th Axis Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling Hslhccozh U D Doqtofi -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), Year of construction: 2002, Make: HEDELIUS Type of machine: CB 80/2300 Year of manufacture: 2002 Control system: Heidenhain TNC 426 Machine's weight: 14.000 kg Tool holder: SK 40 spindel speed: 8.000 1/min x-travel: 2.300 mm y-travel: 800 mm z-travel: 600 mm Speed range: 8.000 1/min max. Table load: 2.800 kg Max. workpiece weight: 2.800 kg Operating time: 54.386 h Hslhozh Huzeccqtefi Chip removal device: Ja Spindle operating time: 26.351 h Table dimensions: 2.900 × 750 mm Number of tools in the magazine: 30-fach

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) Hfjlhcezh Hlaecqtei • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)