France Equipements

Condition: used, Year of construction: 2008, x-travel 730 mm y-travel 650 mm z-travel 730 mm Control Professional 5 total power requirement --- kW Lredpfjya Eqgox Ahzjg weight of the machine ca. 9,3 t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Ljdpoya Ed Hsfx Ahzerg Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,339 h, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840D Solution line, table load: 600 kg, number of axes: 4, This 4-axis HELLER H2000 horizontal machining center was manufactured in 2017. It features a Siemens 840D Solution Line control, rapid traverse of 60,000 mm/min, and a spindle speed of 10,000 rpm. The machine can handle workpieces up to 720 mm in diameter and 850 mm in height, with a maximum table load of 600 kg. Consider the opportunity to buy this HELLER H2000 horizontal machining center. Contact us for more information about this machine. Additional equipment • Chip conveyor • Coolant filtration with paper filter KF 400 • Through-spindle coolant, 50 bar • Work area flushing Machine Benefits Technical Machine Benefits • Acceleration: 8 m/s² • Standard color: grey-white / sand grey / ultramarine blue • Max. Workpiece diameter: 720 mm • Max. Workpiece height: 850 mm • Nc rotary table, indexing 360000 × 0. 001° • Clamping station, manually operated pallet, 4 × 90° • 2 pallets, 400 × 500 mm • Tool magazine positions: 54 Lodpfxsyarzls Ahzjrg Extra Information Operating mode: Mode 3 Electrical: 50 Hz, 400 V Hydraulic interface for tool clamping, 5-fold, 60 bar Additional hydraulic control line Hydraulic connection kit with couplings (2 units) Nosepiece for multi-spindle head Infrared receiver for RENISHAW probe RENISHAW probe Drill breakage detection system Signal tower (red-yellow-green) Technology cycles package Additional operating panel at tool magazine

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 18,000 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, Machine designation: Machining Centre Manufacturer: Mazak Model: HCN 5000-II Year: 2008 Technical details: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Controller manufacturer: Mazatrol Controller model: Matrix Nexus Max. workpiece weight: 700 kg Overall height: 2,813 mm Overall length: 5,985 mm Overall width: 3,056 mm Table width: 500 mm Table length: 500 mm Total weight: 11,000 kg Max. spindle speed: 18,000 rpm Mazak HC Nexus 5000-II CNC horizontal machining centre Ledpfx Aeyargbshzjrg Mazatrol Matrix CNC control Pallet table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-Y-Z axes travel: 730 x 730 x 740 mm Table indexing: 0.001° Spindle taper: DIN 69871A-40 Spindle speed: 18,000 rpm Spindle motor: 35-26 kW Tool magazine capacity: 80 For any questions regarding the machine or to arrange a viewing appointment, please contact us by phone or email.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,214 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller model: SINUMERIK 840 D sl/operate, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. main spindle speed: 20,000 rpm Max. torque: 250/104 Nm Tool holder: HSK-A63 Distance spindle center to table: 80 - 810 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 mm x 500 mm Max. workpiece weight: 500 kg Pallet change time: 9.0 s Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Number of tool stations: 40 Tool change time (tool to tool): 2.5 s Tool change time (chip to chip): 4.4 - 10.0 s Max. tool diameter: 70 mm Max. tool length: 550 mm Max. tool weight: 12 kg Rapid traverse speed: 60,000 mm/min MACHINE DETAILS Lsdpfx Aoyapvajhzorg Control: SINUMERIK 840 D sl/operate High-pressure coolant: 70 bar Dimensions & Weight Floor space required: 6,000 mm x 4,000 mm x 2,700 mm Machine weight: 12.0 t Operating hours: 5,214 h EQUIPMENT Pallet changer Coolant tank Tool breakage monitoring

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 136722, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M Plus, table width: 400 mm, table length: 400 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, Mazak H415 • X 560 mm • Y 510 mm • Z 510 mm • Rotary table 360° - 1° indexing Lrsdpfx Asyan Axjhzeg • 6-pallet magazine • 120-tool magazine • SK 40 • Through spindle coolant (IKZ) • Year of manufacture: 1998 • 9,150 kg Can be inspected under power.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table load: 500 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This Mazak NEXUS 5000 II was manufactured in 2007. It features a table size of 500 x 500 mm, capable of handling weights up to 500 kg. Equipped with a high-speed spindle at 18,000 rpm and a spindle motor power of 18.5 kW, it ensures efficient machining. Includes a 40-position tool changer and Mazatrol Matrix control for enhanced precision. Contact us for more information about this machine. Additional equipment • Chip conveyor • CNC handwheel • CTS 20 bar • 40-position tool changer • tool integrity sensor Machine Benefits Technical Machine Benefits • 500 kg • Table dimensions: 2 x 500 x 500 mm • Indexed table Lodpfoyalldsx Ahzsrg • Cee certified • Includes manuals Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. • Pallet size: 500 × 500 mm • Number of pallets: 24 pallets Lrsdpfx Ahjx Utv Uezsg • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) • Tool presetting: Yes • Tool breakage detection: Laser system • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, HAAS EC 400 HORIZONTAL MACHINING CENTER 4 AXIS OMEGA DESIGN SOLUTIONS UK Use 15 Haas machines to manufacture high precision components for the Aerospace and race car markets. We use Haas machines from VF1 to the mighty UMC750SS. We have used Haas machines for 15 year and feel they are the best in the market. Ljdex Urc Topfx Ahzsrg This EC400, twin pallet horizontal machine The tooling is bt40 , there are tools included in the sale. We can demonstrate the machine or set it up to make your parts if required. 2008 machine ready for work £39000 plus vat for UK customers Terms and conditions apply

Condition: good (used), Year of construction: 2004, functionality: fully functional, Model Year: 2004 Width: 500 mm Length: 500 mm Height: 500 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (RPM): 15,000 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK Lrsdpfx Ahjx Tzn Nozjg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Width: 600 Length: 600 Lsdpfxox Tzmxj Ahzjrg Height: 600 Number of axes: 4 Holder: SK40 Spindle speed (rpm): 15,000 Processable material types: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Width: 600 Ledpox Tzafjfx Ahzsrg Length: 600 Height: 600 Number of axes: 4 Tool holder: SK40 Spindle speed (RPM): 15,000 Processable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Year of construction: 2013, x-travel 750 mm y-travel 1.000 mm z-travel 870 mm control Siemens spindle tunring speed 18.000 U/min tool taper HSK 63 number of spindles 2 no. of tables 2 Number of axes 5 In our assessment, the machine is in good used condition Ljdpfsx Ti Drex Ahzerg and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1999, Control: Mazatrol Fusion 640M Travels X/Y/Z: 710/610/660 mm Spindle speed: 15,000 rpm Lsdpox S R Susfx Ahzerg Tool magazine for 120 tools SK40 Double pallet changer (500x500 mm) Max. workpiece: Ø 730 mm, H 711 mm, 500 kg Chip conveyor

Condition: used, Year of construction: 2006, DMG DMC 70H Duoblock + RS4 CNC Machining Centre (2006) Manufacturer: DMG Model: DMC 70H Duoblock + RS4 CNC Machining Centre Year of manufacture: 2006 Condition: Used, powered on and ready for demonstration Lrjdsx S N E Hopfx Ahzog Power-on hours: 92,800 h Spindle hours: 70,200 h Spindle speed: 18,000 rpm Spindle mount: SK40 Tool magazine: 180 positions Internal coolant supply (IKZ): 40/80 bar Belt filter system RS4 pallet station including 4 pallets. Further information to follow.

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Ljdpfxjx Syfks Ahzsrg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Control: MSG-501 + MAPPS X axis mm: 800 Y axis mm: 510 Z axis mm: 510 Worktable dimensions mm: 1,100 x 600 Table load capacity kg: 1,000 Cutting feedrate mm/min (X, Y, Z): - Max. rapid traverse m/min (X, Y, Z): 42, 42, 42 Spindle speed rpm: 12,000 Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: - Tool changer type: RANDOM Tool changer positions: 30 Max. tool diameter mm: 80 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Ljdpsx Rvtbofx Ahzsrg Max. tool weight kg: 8 Coolant tank capacity l: 230 Through spindle coolant bar: - EQUIPMENT Chip conveyor Oil chiller Automatic shutdown system DIMENSIONS Length mm: 2,788 Width mm: 2,710 Height mm: 2,603 Weight kg: 6,350

Condition: ready for operation (used), Year of construction: 2012, operating hours: 45,656 h, functionality: fully functional, machine/vehicle number: AX4E -NAOS 12-160, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. spindle speed: 12,000 rpm Spindle drive power: 15 / 11 kW Max. torque: 102 Nm Tool holder: SK 40 Distance spindle center to table: 80 - 800 mm Distance spindle nose to table center: 70 - 950 mm Lrodpfxsx I Amie Ahzsg Number of pallets: 2 Pallet size: 500 x 500 mm Max. workpiece weight: 500 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 s Indexing time: 1.49 s Number of tool stations: 60 Max. tool diameter: 70 mm Max. tool diameter with adjacent stations free: 170 mm Max. tool length: 550 mm Tool-to-tool change time: 0.9 s Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Creep feed range: 0 - 5,000 mm/min MACHINE DETAILS Total power requirement: 34 kVA Dimensions & Weight Footprint: approx. 5500 x 3000 x 2800 mm Machine weight: approx. 11.1 t Operating hours: 45,656 h EQUIPMENT Chip conveyor Coolant system Internal coolant supply IF Knoll Tool changer B-axis Pallet changer Oil mist separator Magazine tool breakage control Thread milling Note: Proof of spindle replacement in 2019 is attached.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Chip conveyor Ljdpfx Ahox Iu Dyjzorg 80-tool magazine, CAT 40 taper Spindle 15,000 rpm Through-spindle coolant, 15 bar Performance package

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of axes: 4, General Data Machine weight 13000 kg Lrjdpex Imt Tjfx Ahzog Main Drive Number of axis 4 Spindle Speed 12000 RPM Spindle motor power 30 kW Tool taper BT 40 Movement X-Axis Movement 730 mm Z-Axis Movement 880 mm Y-Axis Movement 730 mm This 4-axis MORI SEIKI NH-5000 40 was manufactured in 2003, featuring a robust horizontal machining centre with a spindle speed up to 20,000 rpm and a power range of 22-30 kW. It includes a versatile tool magazine with a capacity up to 180 tools and a dual-pallet automatic changer to enhance productivity. Pallet size is 500 × 500 mm, supporting a maximum workpiece height of 1,000 mm. Consider the opportunity to buy this MORI SEIKI NH-5000 40 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 770 mm z-travel 805 mm Control Heidenhain iTNC 530 spindle tunring speed 16.000 U/min spindle drive 25/32 kW torque 159/206 Nm tool taper HSK-A 63 number of tool places 40 Pos. size of pallet 400 x 400 mm numbers of pallets 2 Lsdpfx Ahsx Ik Tqjzerg auto power on hours ca. 38.013 spindle hours ca. 17.871 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Interchangeable inserts - Chip conveyor - Internal coolant system - Tool cleaning system - Tool length measuring device - Laser measuring system for tool monitoring, Blum - Compressed air supply through the spindle center - Cleaning gun - Blow gun - Electronic handwheel, Heidenhain HR 520 - Decentralized work area extraction, 800 m³/h Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2008, CNC Horizontal Machining Center Lrodpfjx Hgh Isx Ahzeg MAZAK HCN 5000 II Year of manufacture: 2008/10 Tool magazine: 40 tools Spindle speed: 18,000 rpm NC rotary table (fourth axis / 0.001 x 360,000 positions) Technical Specifications: Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Distance from spindle center to pallet center, min.: 70 mm Distance from spindle center to pallet center, max.: 810 mm Distance from spindle center to pallet surface, min.: 100 mm Distance from spindle center to pallet surface, max.: 830 mm Tool holder: SK40 Tool magazine: 40 tools Spindle speed: 18,000 rpm Pallet working area: 500 x 500 mm NC rotary table (fourth axis / 0.001 x 360,000 positions)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Lrjdpfxex Exvzo Ahzeg Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 63 m/min, rapid traverse Y-axis: 63 m/min, rapid traverse Z-axis: 63 m/min, nominal power (apparent): 48 kVA, controller manufacturer: Fanuc, controller model: F31i-B Plus, workpiece height (max.): 1,150 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 500 mm, table load: 700 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, spindle nose: BT40, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, Machine Technical Specifications: Travels: X: 760mm Y: 760 mm Z: 800 mm Table: 500x500mm Load capacity: 700kg Workpiece dimensions: Ø 800 x 1150mm (depending on workpiece shape) Taper: BT40 (dual contact) Spindle power: 37/26/18.5 kW Maximum speed: 15,000 rpm Controller: FANUC 31i 5Plus Tool magazine slots: 60 Max. tool length: 550mm Max. tool diameter: 95mm (170mm with no tools in adjoining pockets) Max. tool weight: 12kg Machine dimensions: 4605 x 2750 x 3605 mm (L x W x H) Weight: 10,500kg Additional equipment: CTS (Coolant Through-Spindle) preparation High-pressure unit (70 bar) Tool breakage detection in magazine (contact type) Lift-up chip conveyor – scraper type with drum filter & floor magnet (Type E) Soft AC Coolant shower gun (medium pressure) Lrsdpfx Aex Ekfushzsg

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4710 mm Ledpfox D Rriex Ahzorg Measurements depth 2700 mm Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50 to 15000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Table Table load 500 kg Tools Max weight 10 kg Max tool diameter 70 / 150 mm Max tool length 300–450 mm This 4-axis Okuma MB 5000H was manufactured in 2011. It features a robust horizontal machining center design with a 500 × 500 mm pallet size, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min⁻¹ with a SK40 taper, enhancing its versatility. Additional features include a chip conveyor, shower system, and provision for a Renishaw probe. If you are looking to get high-quality milling capabilities consider the Okuma MB 5000H machine we have for sale. Contact us for more information. Application Types Milling