Oneseal

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm Nledpox Hp E Aefx Ah Uok distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Nledpfx Asxn Sp Doh Uok

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Nljdpfjw R Dgzjx Ah Ujk

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Nljdpfswywn Eex Ah Uek

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 Njdjwpr Ufopfx Ah Uslk SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: good (used), functionality: fully functional, FRECH DAK 580-62 DRC Die-Casting Machine, used Machine number 430302, pressing force 5800 kN, opening force 155 kN, maximum opening stroke 680 mm, double toggle lever (mould lock), pressure chamber design cold chamber, press-in force 589 kN, filling piston diameter 60 to 110 mm, filling volume of pressure chamber 1101 to 3700 cm³, specific pouring pressure 642 to 2155 bar, largest blast area approx. 274 to 920 cm³, clamping plates 1120 x 1120 mm, clear width between columns 700 x 700 mm, mould height max. 800 mm, min. 350 mm, mold area 446 x 446 mm, 4 columns, column cross-section 140 mm³, software version SBS 20.10 VISUALIS 17.10, including dosing furnace MELTEC AVDF 1200/5000, year 2016, Nledpfx Ahswc Tn Tj Usk Serial number 3376/16, handling robot ABB, spray head, temperature control unit REGLOPLAST 300DG/12/FM30/1K/RT45, serial number 371412, without year of manufacture. Technical attributes dimensions (l x w x h) approx. 8000x5500x3500mm weight approx. 36000kg year of construction 2000

Condition: good (used), Year of construction: 2001, functionality: fully functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1000 mm, clamping platens 1300 x 1300 mm, column distance 825 mm, column diameter 180 mm, casting force max. 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1539 to 4523 cm³, operating pressure 160 bar, drive motor 45 kW, with dosing furnace MELTEC AVDF 1200/5000, year 2017, serial number 3469/17, 30 kW, handling robot ABB, year 2007, with control system, spray head, power supply unit in control cabinet missing, pump defective, as spare parts donor Technical attributes dimensions (l x w x h) Nodpfx Aswc Tdzjh Ujlk approx. 8000x7500x3500mm weight approx. 36000kg year of construction 2001

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator. Nlodpov D Dwpsfx Ah Ujk

Condition: new, Year of construction: 2024, closing pressure 2200 kN clamping plate 755x755 mm Nedpfxjvvx Hcs Ah Uolk distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 m/m injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 m/m Used Die Casting machine DAW XX with XX control and real-time injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement. ----- Used Die Casting machine DAW XX with XX control for the use of zinc alloys. Available from used machine stock. On the machine some repairs were carried out by us as manufacturer. Amongst other things, the closing unit was overhauled, all cylinders new sealed and recognizable defective parts replaced. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. ----- Used Die Casting machine DAW XX without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Nledsucfwpopfx Ah Usk

Condition: ready for operation (used), Year of construction: 1982, Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible. Njdpfx Ahett Dybs Ujlk

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating Nedpfer Hwf Aox Ah Uelk 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Year of construction: 2006, condition: good (used), İtalpresse SC 750 2006 Relbo Directo Nodpfxjkw Unue Ah Uolk Teknopres KZP 50 Kawasaki Robot

Year of construction: 1996, condition: good (used), Die casting cell, consisting of die casting machine, manufacturer ItalPress, model IP1350SC, serial no. 2372, year of manufacture 1996, clamping force approx. 1,350 t, plus Nljdpfx Asgw H N Nsh Usk - Holding furnace, manufacturer StrikoWestofen, model W900SL-DG, furnace volume approx. 820 dm³, serial no. 6497, year of manufacture 2000, - spraying unit, manufacturer Wollin, type BSM3F, year of construction 2012, unit no. 3381 - unloading robot, manufacturer Kuka, 6-axis - cooling basin - trimming press, manufacturer FKS, type KZB40, serial no. 2097021, year of construction 1998 - conveyor belt, length approx. 3.000 mm - machine is out of operation for more than 1 year

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Nedpfx Aefbl E Sjh Ujlk Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Nlsdjfbl Enjpfx Ah Ujk Machine is DISMANTLED