WSF Werkzeugmaschinen GmbH

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 300 mm, turning diameter: 430 mm, Control: Siemens 840D with Shopturn Max. Bar Capacity: Ø 45 mm Max. Turning Diameter: Ø 300 mm Swing Diameter over Bed: Ø 430 mm Distance Between Main/Counter Spindle: 720 mm Travel Paths: X 160 mm / Z 510 mm / Y +40 / −30 mm Duedpfeyid H Aex Abujn Rapid Traverse: X/Y/Z 24 / 10 / 30 m/min Spindles Main Spindle Speed: 0–7000 rpm Counter Spindle Speed: 0–7000 rpm Drive Power: Main Spindle 15 kW / Counter Spindle 15 kW Max. Torque (at spindle): 100 Nm (main and counter spindle) Spindle Bore: Ø 53 mm Turret / Tools Tool Turret: 12 positions, VDI 25 Driven Tools: 12, speed 0–8000 rpm, power 4 kW, torque 16 Nm Square Shank Tool Cross-section: 16×16 mm, Boring Bars: Ø 25 mm C-Axis Resolution: 0.001° Rapid Traverse (C-Axis): 1000 rpm Spindle Indexing (disc brake): 0.01° Media / Installation Coolant Tank: 250 l Connected Load: 38 kVA Compressed Air: 6 bar Dimensions (without chip conveyor, L×W): 2662 × 1790 mm, Overall Height 2080 mm Machine Weight: approx. 4000 kg

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, Dusdpeyia T Sjfx Abuen B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 1,000 mm, turning diameter: 630 mm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, Technical specifications for Okuma Multus B300-W with Y-axis and bar loader Year of manufacture: 2010 Machine configuration: • Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) • Tool spindle: 10,000 rpm with HSK-A63 • Air blast through spindle center • Tool magazine: 60 stations • Workpiece catcher • Renishaw 3D probe RMP60 including preparation for in-process measuring Duedpfx Absyiayxjujn • Swarf conveyor: hinge belt Interlit • High-pressure pump: Brinkmann TM26/180 • Preparation for oil mist extraction • Short bar loader: SAMSYS Multi-3000LR 1240/65 Main spindle: • BigBore with A8 spindle nose – speed: 38-3,800 rpm • A8 add-on kit for through-hole clamping for max. 65 mm bar diameter • SMW collet chuck, axial draw – Hainbuch Spanntop system Counter spindle: • Max. speed: 5,000 rpm with A6 spindle nose • A6 add-on kit for through-hole clamping • Workpiece ejector for counter spindle, Ø 52 mm Working area: • Maximum turning diameter: Ø 630 mm • Swing diameter over cross section/bed: Ø 630 mm • X-axis travel: 580 mm – rapid traverse 40 m/min • Z-axis travel: 935 mm – rapid traverse 40 m/min • Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min • W-axis travel: 1,000 mm – rapid traverse 20 m/min • B-axis is incremental, 0.001 degree Weight: approx. 10,300 kg

Condition: good (used), Year of construction: 1999, Gildemeister MF Twin 65, year of manufacture 1999, Siemens 840 D control, travel X/Z 190/555 mm, 1 x Y axis +/- 40 mm, 2 turrets with 12 stations each, driven tools, VDI 30 toolholder, C axis, spindle speed up to 6,000 rpm, max. bar passage up to 65 mm, bar feeder is included but is no longer installed on the machine. Duodpfjyiab Aex Abuon

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, Axes X, Z, C, Y, and B, bar feeding via short bar magazine Multifeed MX-1B, collet chuck on the main spindle, Schunk 3-jaw chuck with 160 mm diameter on the sub-spindle, 12-position turret with driven tool, parts catcher, chip conveyor, bar capacity 50 mm. Control unit: FANUC 32i. Duedpfx Abeyh Rfvjujn In addition to its impeccable condition, comparable to a new machine, this unit stands out with its tilting spindle and automatic tool changer. Additional tools are included.

Condition: like new (used), Year of construction: 2021, operating hours: 65 h, Only 65 cutting hours. Dujdpfxsyh Nqdo Abujn 520/300 x 500mm, X 235mm Z 520mm, C 360/0.001. 3,800Rpm, spindle bore 80mm, driven tools 4,500Rpm

Condition: ready for operation (used), Year of construction: 2003, turning length: 363 mm, turning diameter over cross slide: 430 mm, spindle speed (max.): 3,500 rpm, spindle bore: 61 mm, overall weight: 2,800 kg, distance between centers 550 mm diameter over bed 510 mm, over carriage 430 mm Duedpfx Aoyh Nl Usbusn spindle bore 61 mm maximum spindle speed 3500 rpm weight 2800 kg

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Dodpfoyh I Tdjx Abuoun Control system: Mazatrol Matrix Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: ready for operation (used), Year of construction: 2004, Make: MAZAK Type of machine: INTEGREX 300-3ST Year of manufacture: 2004 Control system: Mazatrol 640 CNC-Steuerung Machine's weight: 14.200 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Dedpfxeyh I Rvs Abueun Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki with double turret, a C-axis and driven tools. Dedpfxjyh I H De Abusun The machine is in very good condition and can be inspected and tested in our facility. The scope of delivery includes 4x driven tool holders.

Condition: like new (used), Year of construction: 2018, operating hours: 3,666 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle nose: A2-8, overall weight: 5,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is operational and set up in our showroom, and can be inspected by appointment! This DMG MORI CLX 450 V3 comes standard with: - 19" SlimLine PLC with TouchScreen. - Siemens electronic handwheel. - Chip conveyor. Duedoyh Inhopfx Abuon - High-pressure pump (12 bar). - Unused 3-jaw chuck (SMW AUTOBLOK KNCS-N-260-78 Ø260). - Various VDI-40 tool holders (static). - MARPOSS measuring arm incl. calibration holder (VDI-40). - Mechanical preparation for mist extraction unit. - Double foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar) - Original DMG documentation. - Set of chemical anchors.

Condition: used, Year of construction: 2006, Used 2006 CMZ TL20-M Fanuc controlled CNC lathe with driven tools, C-Axis, tailstock, swarf conveyor, tool setter, short mag barfeed, swarf conveyor, various soft jaws, driven and static tool holder package CONTROL FANUC 18i-TB MAX TURNING LENGTH 640mm DRIVEN TOOLING Yes - 12 stations Main Spindle Spec: 12kW, 4000rpm, 46Nm BAR CAPACITY 66mm SWING OVER CARRIAGE 510mm MAX TURNING DIAMETER 400mm SWING OVER BED 680mm AUTOMATIC TURRET Yes Duedpfx Aoyh Iakobujn MAIN MOTOR POWER 15/11kw RPM HEADSTOCK 4000rpm YEAR 2006 EXTERNAL DIMENSIONS 3800x1850x1920mm WEIGHT 5,400 KG Main Spindle Spec: 12kW, 4000rpm, 46Nm

Condition: used, Year of construction: 2016, Here’s a rare machine! Due in on the 16th February, photo’d on site. 2016 CMZ TC35-Y x 1350, supplied with a 12” 3 jaw power chuck, tailstock, removable tool setter, driven tools, C-Axis, Y-Axis, suit of static and driven tools, fixed steady, various soft jaws, Coolant Mist extraction, swarf conveyor & high-pressure coolant. In superb condition! Specification: Control: CNC FANUC 32i Model-B control Max swing over bed 745mm, Max swing over carriage 560mm Max turning dia: 550mm Distance between centres: 1410mm Dujdpfoyh H A Rjx Abuen X-Axis stroke: 315mm, Z-Axis stroke: 1350 mm, Y-Axis Stroke 140mm, Rapid feed rates: 30 m/min Max Spindle RPM: 3000, Spindle Nose: ASA 11" A2, Spindle bore: 106mm, Max Bar to pass: 95mm Std Chuck diameter: 315mm Spindle motor:48 Kw Turret: No of turret positions: 12, No of driven stations: 12, Max Driven tool RPM: 4000, Driven tool motor power: 16,7 Kw Tailstock: Quill dia: 110mm, Quill taper: MT4, Quill stroke: 150mm GENERAL DATA: Power requirement: 65 KVA, Weight: 8000 Kg, Machine Size: 4090x2210x2360mm Max turning dia: 550mm Distance between centres: 1410mm Pass: 95mm

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Duedpfjyh Hlrsx Abujn

Condition: good (used), Year of construction: 2022, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control system, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, gear hobbing software. Dsdpfx Aboyh Hk Ieuoun

Condition: used, Year of construction: 1998, functionality: fully functional, Manufacturer/Model: GILDEMEISTER CTX 400 E Year of manufacture: 1998 Condition: Very good Location: Spain Dsdpfxoyh E Dto Abuoun Delivery/loading possible. 12-station tool changer (driven), driven C-axis, VDI30, programmable tailstock, tool measurement arm T18, oil mist extraction unit, swarf conveyor, high-pressure pump, Turn Plus (graphical programming), Control: HEIDENHAIN Maximum turning diameter: 570 mm Turning diameter over cross slide: 420 mm

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Traub control, turret, tailstock, chip conveyor. Dedpfx Aboyh Drvjusun

Condition: like new (used), Year of construction: 2007, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: 20,000 - 25,000 euros. * Year: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Subspindle. * 12-station turret, all positions driven. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Subspindle integrated motor: 15 kW. * Direct drive motor for driven tools: 5.5 kW. * Motor starting torque: 640 Nm. * Beltless and gearless motors. * Main spindle nose size: A2-8. * Subspindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Subspindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Driven tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. Dujdpfoyh Azvsx Abuen * Conversational automatic programming system: Mapps 4. * Automatic load control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret index change time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS-232. * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening/closing of main and subspindle chucks. * Side-mounted hinge-type chip conveyor. * Extensive set of static and driven tool holders. * Electrical transformer. * Documentation included: parts list, electrical schematics, programming and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * Precision videos must be checked. * Only used for prototyping AOG aeronautical components in aluminum. * Immediate delivery unless sold prior.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: €20,000-24,000. * 4-axis machine. * Fully independent programmable tailstock with Z-axis movement and M-code clamping. * 12-station turret, all positions powered. * C-axis. * Y-axis. * Integrated main spindle motor, 18.5 / 22 kW. * Driven tool motor, 5.5 kW. * Spindle starting torque: 620 Nm. * Integrated, beltless drive. * Main spindle nose: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Kitagawa B-210 spindle chuck. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Max swing: 520 mm. * Max machining diameter: 380 mm. * Max machining length: 1,050 mm. * Oil chiller for spindle. * IGF OSP P200-L conversational automatic programming system. * Automatic cutting force control and tool power consumption monitoring. * Parameterized tool collision-avoidance system. * Tool life management and monitoring. * Rapid traverse rates: 20 and 25 m/min on X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setter arm. * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for chuck and tailstock open/close operation. Dodpfeyh Axbox Abueun * Side-hinged chip conveyor. * Complete set of external and internal static toolholders. * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operator manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless previously sold.

Condition: good (used), Year of construction: 1999, Emco lathe PCturn 120 with accessories and documentation Dsdpfx Absyhzfyoueun

Condition: used, Year of construction: 1999, functionality: fully functional, Manufacturer/Model: NAKAMURA TW10 Year of manufacture: 1999 Condition: Very good Location: Spain Delivery/loading possible. Turning diameter: 130 mm Turning length: 160 mm X-axis travel: 180 mm Dusdpfxjyhxa Ue Abuon Z-axis travel: 200 mm Control: FANUC Series 18-T Tool holder: BMT45 Spindle speed: 4,500 rpm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 2,125 mm, turning diameter over cross slide: 580 mm, turning diameter: 420 mm, spindle motor power: 25 W, spindle bore: 102 mm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 2,190 mm, mount diameter: 315 mm, For sale: DOOSAN PUMA 3100XLY turning center from 2013. Technical data: Max turning diameter: 420mm Max turning length: 2125mm Axis travels X/Y/Z: 293 / 130 / 2190mm Chuck size: 315mm (12'') Spindle bore: 102mm Max spindle speed: 2800rpm Spindle type: Electro-spindle Number of turret stations: 12 Dedpfx Absyhv N Njusun Max driven tool speed: 5000rpm Head type: BMT65 Machine weight: approx. 11,000kg Machine equipped with SMW SLU3 self-centering steady rest - 45-165mm Control system: Fanuc with Manual Guide Machine in continuous operation. Inspection and testing possible. Both static and driven tool holders included.

Condition: used, Year of construction: 2022, functionality: fully functional, turning length: 1,280 mm, turning diameter over cross slide: 255 mm, type of input current: three-phase, bar passage: 81 mm, total height: 2,200 mm, total length: 5,400 mm, chuck outer diameter: 210 mm, total width: 1,800 mm, overall weight: 7,850 kg, Equipment: documentation/manual, We are offering this used Doosan PUMA 2600 LSY II CNC turning and milling center, year of manufacture 2022. Model: PUMA2600LSYII Serial number: ML0378-000106 Power supply: AC 380 V, 3~, PE, 50/60 Hz Rated power: 57.08 kVA Interrupting capacity: 5 kA Full load current: 86.73 A Short-circuit capacity: 10 kA Wiring diagram output: P21SYH31UE04 Weight: 7850 kg Date of manufacture: 2022.03 6-AXIS CNC – HORIZONTAL – HIGH-PERFORMANCE TURNING CENTER with LIVE TOOLS, Y-AXIS, and SUB-SPINDLE Commissioning: 02/2023 Low hours, operated on single-shift basis only The machine can be demonstrated under power at our premises. Affordable shipping can be arranged. Technical details and scope of delivery: • CNC control FANUC 0-iTF+ with Manual Guide i, 15” touch screen • MONOBLOCK machine bed, cast construction (Meehanite cast iron) 30° slant bed in tubular design • Main and sub-spindle as built-in spindle units • Main spindle with 5 bearings (3x angular contact ball bearings + 1x double-row cylindrical roller bearing) spindle bearings, precision class P4, lifetime lubrication • Three-jaw power chuck for main spindle Ø 255 mm and sub-spindle Ø 175 mm including 1 set of soft top jaws • Through-hole clamping unit, hydraulically actuated with hollow clamping cylinder, complete with safety device, coolant catch tray, stroke control, and draw tube • 12-position tool turret with BMT 65 P mountings and directional logic • Maximum turning length 1280 mm • Bar feeder interface Duodpfeyhp Hzox Abujn • Electronic safety coupling for X and Z axes • Automatic central lubrication • Oil separator • 3-color warning light beacon • Hardened flatbed guideways, counter-side coated with Rulon 142 • Z-axis way cover • Full enclosure • Waterproof work area lighting • 1 set of auxiliary tools • Alignment bolts and mounting pads • Coolant system with 7-bar delivery pressure • Absolute position measuring system on all axes • Spindle motor AP2/10000_7.5/1.5kW • Bar capacity Ø 81 mm • 3-jaw chuck Ø 210 mm (main spindle right) • Hard jaws • Internal coolant supply through the sub-spindle • Workpiece ejector • Parts catcher with conveyor belt for the sub-spindle • Automatic tool measurement arm, electrically swiveling • Coolant pump, delivery pressure 14.5 bar, 30L/min • LNS scraper-type chip conveyor MH500, right side • Oil mist extraction system • 1.5 m bar loader adapted and fully functional on the machine External dimensions / footprint: Length 5400 x Depth 1800 x Height 2200 mm (with chip conveyor) With extraction system, height is 2800 mm Further optional used accessories available from us: Tool holders, live tool holders, collet chucks right and left with collets 185E from Ø 1-60 mm, adapters for Hainbuch mandrel clamping system If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, functionality: fully functional, Control: MAZATROL 640 Dusdpfxeyhp A Ae Abujn workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm table speeds: 500 rpm table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: used, Year of construction: 2019, Mazak Quick Turn 200MB Control: Mazatrol Smooth G Year of manufacture: 2019 Turning length: 500 mm Maximum swing: 695 mm Maximum machining diameter: 380 mm Maximum machining length: 541 mm Chuck size: 8" X-axis: 234 mm Z-axis: 625 mm Main spindle: - Power: 26 kW - Max spindle speed: 5,000 rpm - Spindle nose: A2-6 - Spindle bore: 76 mm - Max bar diameter through spindle: 65 mm Turret: Dujdpfx Absyhph Sousn - 12 tool positions (VDI type) - 12 driven positions - Milling drive power: 5.5 kW - Max speed: 5,000 rpm - Interface for bar feeder - Through-spindle coolant pressure up to 15 bar - Automatic part catcher The machine is in very good condition, includes standard tools and driven tools. Serviced 2026-01-12. Year of manufacture: 2019 * Max spindle speed: 5,000 rpm * Spindle nose: A2-6 * Spindle bore: 76 mm * Milling drive power: 5.5 kW * Max speed: 5,000 rpm Turning length: 500 mm X-axis: 234 mm Chuck size: 8" * Power: 26 kW Z-axis: 625 mm