COPRIMA Kft

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Rcjdpfsxtaxwex Ab Rsh Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: CM18355, overall weight: 2,900 kg, input voltage: 400 V, power: 5.5 kW (7.48 HP), type of input current: three-phase, punching force: 63 t, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, ECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Rsdpfxexqp Sbj Ab Rech Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description Rcjdpfsxp Sfhjx Ab Rjh - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 250 kg, Cross Slide – Support Type PS 30 Support suitable for hand-operated press machines with 300 mm center height Rcjdpsxp Sd Rofx Ab Rsh Technical Data Longitudinal slide travel: 220 mm Cross slide travel: 120 mm Height: 230 mm Rotary table diameter: 200 mm Shear length: 550 mm Weight approx.: 250 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large handwheels

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, overall weight: 500 kg, Manual spinning machine, Make: Pensel Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2300 rpm (stepless) Spindle mount: M 36 Manual steel rest Tailstock stroke: 300 mm (smooth sliding quill) Redpsxp Sddsfx Ab Rjch Machine weight approx.: 500 kg Machine description: - Powerful, lightweight spinning machine - Overhauled and ready for use - Main spindle with new bearings - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control system - Newly painted

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, quill stroke: 300 mm, overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, Hand spinning machine, make Schulte Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2000 rpm (stepless adjustment) Spindle mount: M 36 Manual tool rest Tailstock stroke: 300 mm (quill travel via handwheel) Machine weight approx.: 800 kg Machine description: - Powerful, robust spinning machine - Overhauled and ready for operation - Main spindle newly bearing-mounted - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control Rjdpfx Abexp Sc Hs Rjch - Newly painted

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Redpfx Aexp Sb Aeb Rjch Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: refurbished (used), Spinning Machine, LEIFELD, Type PLB 400 - Gearbox with circulating oil lubrication - Shaping unit (optional) - Oil-air cooler Technical specifications: Blank diameter (max.): 800 mm Distance between centers: 950 mm Tool holder DIN 55027: Gr. 8 Force axis (transverse) (max.): 12 kN Rcedsxpf Ipspfx Ab Roh Force axis (longitudinal) (max.): 28 kN Stroke (transverse): 275 mm Stroke (longitudinal): 415 mm Feed axis speed (transverse) (max.): 2.0 m/min Feed axis speed (longitudinal) (max.): 2.0 m/min Ejector stroke: 150 mm Tailstock stroke: 650 mm Spindle speeds (9 steps): 108-1.084 rpm Main drive (DC motor): 5,5 kW Hydraulic drive: 5.5 kW Operating Voltage: 400V Frequency: 50Hz Connected load approx. 12 kVA Weight: approx. 3.000 kg

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Rjdpfjxm Rq Rsx Ab Rech Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked to metal strips for profile package.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch Rcsdpfjxmiirex Ab Reh d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Redpfoxlpurex Ab Roch Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Redpfx Aoxfiq Hjb Rjch

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, BUD-MASZ roof tile sheet machine, manufactured in 2010, 3,510 km mileage, 1250 mm strip, without decoiler. Redexbgl Topfx Ab Rsch

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 2035, input voltage: 380 V, power: 4 kW (5.44 HP), Transfer punching machine SCHOREDER & BAUER HB 20 Power 20T per workstation (2x20 T) Number of strokes from 20-100 rpm Year: 1989 Serial number: 2035 Kw 4 Rsdjw Tcglopfx Ab Rsch Weight approx. 3500 kg Complete documentation comes with the machine. The machine is in working condition. The costs of organizing a crane or forklift for loading the machine are charged separately.

Condition: excellent (used), Year of construction: 2008, operating hours: 500 h, functionality: unexamined, machine/vehicle number: CV0604, pipe diameter (max.): 1,400 mm, Equipment: CE marking, Incremental HOT Pipe Induction Bending Machine – Cojafex (Netherlands) | 2008 Make: Cojafex (OEM, Netherlands) Model: Incremental HOT Pipe Induction Bending Machine Year of Manufacture: 2008 Condition: Almost unused – only 198 pipes bent Rcsdpjw Igr Ijfx Ab Rjh Location: India (Currently dismantled & ready for transport) Availability: Immediate Price: Euro 1.5 Million Key Features: Original OEM Make – Cojafex, Netherlands, global leader in pipe induction bending technology Incremental hot pipe bending for high-precision industrial applications Suitable for bending large-diameter and 100 MM thick-walled pipes of Dia 1400 MM Machine is almost unused – only 198 pipes bent Ideal for oil & gas, energy, heavy engineering, and infrastructure sectors Condition & Readiness: Machine is dismantled, stored securely in India Can be inspected upon request OEM (Cojafex) ready to commission and install the machine on-site under a separate contract Logistics: Can be shipped internationally Crating and loading support available All original documentation available Serious Buyers Only: Inquiries welcome. Please contact us for detailed specifications, photos, and pricing.

Condition: ready for operation (used), Injection mold for plastics. K60/156x196x9/1.1730II92 12 06 Rcjdpsvi Ialjfx Ab Reh

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Rcjdpfx Abovcfhmj Rjh Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: refurbished (used), The PNC 90 - 3A is equipped with three additional PNC/CNC controlled auxiliary axes. That allows now a working area of ​​approx. 900x1,1100mm and this means extremely economical production of large printed parts. - Blank Centering Unit - Blank counter holder - Shaping Unit BAE I (on headstock) - Shaping Unit KA (in front of machine) - 4-fold tool turret Technical specifications: Blank diameter (max.): 900 mm Distance between centers: 1.100 mm Tool holder DIN 55027: Gr. 11 Force axis (transverse) (max.): 45 kN Force axis (longitudinal) (max.): 45 kN Rcsdjupmx Nopfx Ab Rjh Stroke (transverse): 305 mm Stroke (longitudinal): 650 mm Feed axis speed (transverse) (max.): 7.0 m/min Feed axis speed (longitudinal) (max.): 7.0 m/min Ejector stroke: 300 mm Tailstock stroke: 450 mm Spindle speeds (stepless): 100-2.300 rpm Main drive: 28 kW Hydraulic drive: 15 kW Operating Voltage: 400V Frequency: 50Hz Connected load approx. 20 kVA Weight: approx. 7.500 kg Further services, machine accessories and spare parts that you can obtain from us: - installation of the machines + commissioning and training - control upgrades (PLC + PNC/CNC) on existing machines - machine components - electrical, hydraulic and mechanical spare parts (PNC, PLB and APED machines) Should you have any further questions, please do not hesitate to contact us at any time!

Condition: refurbished (used), LEIFELD - PLB 600 Rcedpfx Ajupaa Teb Reh - Gearbox with circulating oil lubrication - Blank counter holder (optional) - Shaping unit KA - in behind of the machine (optional) Technical specifications: Blank diameter (max.): 1.200 mm Distance between centers: 900 mm Tool holder DIN 55027: Gr. 11 Force axis (transverse) (max.): 20 kN Force axis (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Feed axis speed (transverse) (max.): 3.0 m/min Feed axis speed (longitudinal) (max.): 2.0 m/min Ejector stroke: 400 mm Tailstock stroke: 750 mm Spindle speeds (9 steps): 42-660 rpm Main drive (DC motor): 11 kW Hydraulic drive: 7.5 kW Operating Voltage: 400V Frequency: 50Hz Connected load approx. 20 kVA Weight: approx. 6.000 kg Further services, machine accessories and spare parts that you can obtain from us: - installation of the machines + commissioning and training - control upgrades (PLC + PNC/CNC) on existing machines - machine components - electrical, hydraulic and mechanical spare parts (PNC, PLB and APED machines) Should you have any further questions, please do not hesitate to contact us at any time!

Condition: refurbished (used), LEIFELD - PNC/CNC 350 - Blank Centering Unit - Blank counter holder - Shaping Unit BAE I (on headstock) optional 2. BAE - Shaping Unit KA (in front of machine) - Double-Roller Unit (optional) Technical specifications: Blank diameter (max.): 700 mm Distance between centers: 1200 mm Rcedpfx Aboupaa Ho Rsh Tool holder DIN 55027: Gr. 6 Force axis (transverse) (max.): 22 kN Force axis (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Feed axis speed (transverse) (max.): 6.0 m/min Feed axis speed (longitudinal) (max.): 6.0 m/min Spindle speeds (stepless): 100-2.800 rpm Main drive: 11 kW Hydraulic drive: 5.5 kW Operating Voltage: 400V Frequency: 50Hz Weight: approx. 3.500 kg Further services, machine accessories and spare parts that you can obtain from us: - installation of the machines + commissioning and training - control upgrades (PLC + PNC/CNC) on existing machines - machine components - electrical, hydraulic and mechanical spare parts (PNC, PLB and APED machines) Should you have any further questions, please do not hesitate to contact us at any time!

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Manual spinning machine make Leifeld Type Plb 300 - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrics and buttons - operation new - New paintwork Technical data Tip height mm 350 Tip width mm 800 Machine length mm 2100 Spindle motor kW 4.0 4-speed gearbox Speeds approx. 1/min 200 - 1000 Spindle holder M60 DIN 800 Rodpjrdzv Rofx Ab Rjch Hand steel support Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1100 Special equipment built into the machine - Tip height mm 350 - MK 3 ball bearing pressure center - Stepless spindle speed control in the indexing steps by frequency-controlled drive motor - Electrical switching - Circulating oil lubrication On request: - Cross support PS30/300

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Rjdpoq Dqdiefx Ab Rech Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width Rjdpfx Abokvnuuo Rjch 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: refurbished (used), machine/vehicle number: Leifeld, LEIFELD - PNC/CNC 750 - Gearbox with circulating oil lubrication - Hydraulic blank centering device - Blank counter holder - Shaping unit BAE 1 (on the headstock) optional 2nd BAE - Shaping unit KA (in front of the machine) - optional with double roller holder Technical specifications: Blank diameter (max.): 1.500 mm Distance between centers: 1.225 mm Tool holder DIN 55027: Gr. 11 Force axis (transverse) (max.): 65 kN Force axis (longitudinal) (max.): 65 kN Stroke (transverse): 310 mm Stroke (longitudinal): 800 mm Feed axis speed (transverse) (max.): 5.0 m/min Feed axis speed (longitudinal) (max.): 5.0 m/min Ejector stroke: 300 mm Tailstock stroke: 600 mm Spindle speeds (3 steps): 10-1.000 rpm Main drive (DC motor): 22 kW Hydraulic drive: 18.5 kW Operating Voltage: 400V Frequency: 50Hz Rcedpfjiqpr Rox Ab Reh Connected load approx. 45 kVA Weight: approx. 7.000 kg Further services, machine accessories and spare parts that you can obtain from us: - installation of the machines + commissioning and training - control upgrades (PLC + PNC/CNC) on existing machines - machine components - electrical, hydraulic and mechanical spare parts (PNC, PLB and APED machines) Should you have any further questions, please do not hesitate to contact us at any time!