Milmeca

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor, Rbjdpfxsyyaq Ns Aaaew

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: T90253, turning diameter: 360 mm, spindle bore: 61 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, total height: 1,900 mm, total length: 6,000 mm, total width: 1,300 mm, overall weight: 4,000 kg, controller manufacturer: GE FANUC, controller model: SERIES 21i-T, COLCHESTER TORNADO A 90 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 26 A - Connection: 11 kW - Swing diameter over bed: 410 mm - Bed inclination: 60° - Spindle center height over floor: 900 mm - Maximum automatic chuck: 170 mm - Draw tube bore: 52 mm Redpfx Aeywxa Roaaebw - Front spindle bearing: 80 mm - Min. spindle speed at full motor power: 1000 rpm - Tool holder: VDI 30 - Number of tool stations: 12 - Turning tool cross-section: 20 x 20 mm - Max. boring bar diameter: 32 mm - X-axis travel under turning center: 22 mm The machine is equipped with a 12-position tool turret and a chuck, including a COLCHESTER TORNADO MDF 1000 bar feeder and chip conveyor. Note: The item must be collected firmly at a date to be agreed between 05.05. and 07.05.2026. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: like new (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1435, turning length: 648 mm, turning diameter: 420 mm, spindle bore: 76 mm, spindle speed (min.): 45 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 20 m/min, rotational speed (max.): 4,500 rpm, feed rate Z-axis: 24 m/min, overall weight: 4,100 kg, center height: 240 mm, Equipment: rotational speed infinitely variable, Very nice PUMA 240MSB With sub-spindle and driven tools And chip conveyor. Very low operating hours. 8000 hours power on Rbedeywkwhjpfx Aaasw Sub-spindle max 6000 RPM Control 18ITS with Manual Guide Bar Feeder LNS

Condition: excellent (used), Year of construction: 2007, Equipment: documentation/manual, For sale: CNC Lathe GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, and sub-spindle. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control system: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine Specifications: - Turret: 12 positions for VDI-30 tool holders (all stations powered/driven) - Max spindle speed: 5,000 rpm - C-axis on both main and sub-spindle - Driven tools - Y-axis - Sub-spindle - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - High-pressure coolant system - Hydraulic 3-jaw chuck 250 mm on the main spindle - Hydraulic 3-jaw chuck 200 mm on the sub-spindle - Through-hole main spindle (bore diameter: 77 mm) - Parts catcher - Chip conveyor - Complete programming manual Redsyv Sgbjpfx Aaasbw - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a full inspection. Fully operational, 100%. Connected and ready for demonstration. Stal-Com Company - for 20 years, we specialize in sales, service, and training on CNC machines from the DMG group. We are experts on all Gildemeister lathe models and Deckel Maho machining centers. All our machines undergo a meticulous technical inspection. Our customers include not only clients from Poland but also from across Europe and parts of Asia. Any machine can be checked during operation as we also provide metalworking services. After purchase, we offer operator training, and we can also set up part production at the client's site. We have ongoing partnerships with many companies, supplying further machine tools as required.

Condition: excellent (used), operating hours: 8,500 h, functionality: fully functional, * Muratec MT 25 MC. * Extremely well-equipped, estimated equipment value: 30,000–35,000 euros. * 7 controlled axes. * Twin spindles. * Two turrets. * Each turret with 15 positions, all fully driven. * Driven tools, C axis. * Integrated spindle motor, 15 kW. * Spindle start-up torque: 420 Nm. * Driven tool motor: 4 kW. * Spindle nose size: A2-6. * Maximum machining diameter: 370 mm. * Maximum machining length: 920 mm. * Bar capacity: 65 mm. * Box guideways on all axes. Rodjyvz Twepfx Aaajbw * Two hydraulic chucks, 250 mm each, metric system. * Automatic parts catcher for finished workpieces. * Automatic cleaning of secondary spindle with air or coolant. * Conveyor belt for finished parts. * Interface for bar feeder. * 1.5 m Multifeed bar loader included. * Automatic load monitoring and tool consumption monitor. * Automatic part transfer system between spindles with torque control. * Fanuc CNC. * Fanuc motors and servos. * Rapid traverse speeds: 20 and 25 m/min. * Main spindle speed: 3,500 rpm. * Driven tool speed: 3,000 rpm. * Turret indexing time: 0.2 seconds. * Rear hinged belt chip conveyor. * Machine currently in operation. * Weight: 10,800 kg. * Immediate delivery unless sold prior.

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 324, turning length: 525 mm, turning diameter: 160 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 222 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, quill travel distance: 80 mm, quill diameter: 75 mm, overall weight: 5,000 kg, swing diameter over bed slide: 450 mm, swing diameter over top slide: 300 mm, controller manufacturer: MORI SEIKI, controller model: MORIC-T5F, Equipment: chip conveyor, documentation/manual, MORI SEIKI SL-15 M CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Connection: 20 kVA - Swing diameter over bed: 450 mm - Swing diameter over turret slide: 300 mm - Distance between centers: 595 mm - Standard diameter: 160 mm - Front bearing inner diameter: 90 mm - Number of tools: 12, max. 6 stations for driven tools - Tool shank cross-section: 20 mm Rbodjyvq Nuopfx Aaaow - Max. boring bar shank diameter: 32 mm - Driven tool spindle speed: 100 – 2000 rpm - Feed rate on X-axis: 0.00001 to 250 mm/min; Z-axis: 0.00001 to 350 mm/min - Rapid traverse speed X and Z axis: 1260 mm - Tailstock travel: 450 mm The machine is equipped with a tailstock, a 12-station tool turret (including the tool holders shown in the photos), and a chip conveyor. Note: This item must be collected between 12.05. and 22.05.2026 on a specific date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: used, Year of construction: 2001, LATHE BIGLIA B 501 SM YEAR: 2001 CNC GE FANUC SERIES 18i - T SUB-SPINDLE LIVE TOOLING Rbedpfx Aaeyu Ikleasw BAR CAPACITY: 68 mm MAX. MACHINING DIAMETER FROM SUB-SPINDLE: 250 mm MAX. MACHINING LENGTH: 500 mm MAX. SWING DIAMETER: 520 mm CHUCK DIAMETER 1: 250 mm SUB-SPINDLE CHUCK DIAMETER: 165 mm SPINDLE SPEED 1 AND 2: 40 – 4,000 RPM TOOL TURRET: 12 POSITIONS TYPE: BIDIRECTIONAL TRAVELS: X: 215 mm Z: 510 mm B: 510 mm TOOL PRESETTER CHIP CONVEYOR DRIVEN TOOLS: 2 UNITS COMPLETE DOCUMENTATION WEIGHT: 5,300 kg

Condition: used, turning diameter over cross slide: 330 mm, turning length: 340 mm, turning diameter: 200 mm, rotational speed (min.): 5,000 rpm, bar passage: 44 mm, CNC Fanuc 0T X/Z travel: 180 mm / 560 mm Distance between spindles: 340 mm Swing over bed: 330 mm Maximum allowable diameter: 200 mm Duplomatic turret, 8 positions Spindle nose ASA 5” Power: 7.5/11 kW RPM: 5000 Bar capacity: 44 mm Sub-spindle ASA 4” RPM: 5000 Bar capacity: 30 mm Asmut bar feeder Year: 1997 Rbodpfx Aaeyuwu Hjaow

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm Rbsdpfx Aoyuqaceaasw MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 2001, LATHE BIGLIA B 501 SM YEAR: 2001 CNC GE FANUC SERIES 18i - T SUB-SPINDLE Rbsdpfx Aoyup Tujaaew LIVE TOOLING BAR CAPACITY: 68 mm MAX. MACHINING DIAMETER FROM SUB-SPINDLE: 250 mm MAX. MACHINING LENGTH: 500 mm MAX. SWING DIAMETER: 520 mm CHUCK DIAMETER 1: 250 mm SUB-SPINDLE CHUCK DIAMETER: 165 mm SPINDLE SPEED 1 AND 2: 40 – 4,000 RPM TOOL TURRET: 12 POSITIONS TYPE: BIDIRECTIONAL TRAVELS: X: 215 mm Z: 510 mm B: 510 mm TOOL PRESETTER CHIP CONVEYOR DRIVEN TOOLS: 2 UNITS COMPLETE DOCUMENTATION WEIGHT: 5,300 kg

Condition: new, Year of construction: 2023, operating hours: 687 h, functionality: fully functional, machine/vehicle number: 9353740, turning diameter over cross slide: 318 mm, turning length: 470 mm, turning diameter: 260 mm, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, spindle motor power: 15 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 2,900 mm, total width: 1,600 mm, feed length X-axis: 220 mm, feed length Z-axis: 600 mm, quill diameter: 52 mm, overall weight: 3,600 kg, bar passage: 52 mm, Equipment: documentation/manual, For sale: High-precision CNC lathe Accuway Machinery UT200-M, equipped with live tooling and a C axis, ideal for demanding and high-speed machining tasks. Key features: - Model: UT200-M - Manufacturer: Accuway Machinery (Taiwan) - Year of manufacture: 2023 - Control unit: Fanuc Series 0i-TF Plus - Integrated manual guide for easier programming and simulation Machine specifications: - Maximum turning diameter: 260 mm - Maximum turning length: 470 mm - Swing over bed: 505 mm - Swing over cross slide: 318 mm - Number of turret stations: 12 - Spindle speed range: 6000 / 4500 / 4000 / 3500 rpm - Tailstock quill diameter: 75 mm - Tailstock quill taper: MT#4 Dimensions and weight: - Length: 2.9 m - Width: 1.6 m - Height: 1.9 m - Weight: 3,600 kg Included accessories: - 8 tool holders (5 for external turning, 3 for internal turning) - Live tooling set (Heimatec) – for axial and radial milling - Chip conveyor - Chip collection cart - Air filtration system - Signal tower (red/yellow/green lights) – real-time machine status - Manual guide – for easy manual programming and path verification The machine was purchased new in August 2024, has seen very minimal use relative to its full capabilities, and is immediately ready for operation. For further information regarding condition, price adjustments, technical details, or to arrange a viewing, feel free to contact me via message or phone. Rodpjytpbpsfx Aaaobw

Condition: good (used), Year of construction: 1975, functionality: fully functional, turning diameter over cross slide: 150 mm, turning length: 600 mm, turning diameter: 250 mm, spindle speed (max.): 2,100 rpm, total height: 1,200 mm, total length: 1,400 mm, total width: 600 mm, Equipment: documentation/manual, Equipment 3-jaw chuck 4-jaw chuck Faceplate Tool holder Tool Original base frame Operating manual Condition Machine complete Rbsdpfjyrdydsx Aaasw Overall clean condition Ready for operation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: MC0629, MACHINE SPECIFICATION Height of centres 230mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Width in front of faceplate 216mm Bed length between centres 1500mm Spindle speeds (infinitely variable) 20-2000rpm Spindle nose mounting (Camlock) D1-8 Spindle bore 76mm Taper in nose bush No. 5MT Width over bedways 400mm Travel f cross slide 300mm Travel of top slide 150mm Redpfxsyn Eu Is Aaasbw Taper of tailstock barrel 145mm Tailstock in tailstock barrel No.6MT Approx. weight 2980Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 5-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: like new (used), Year of construction: 2023, operating hours: 2,763 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was commissioned in February 2024 and has 1,778 automatic hours. It has only been used for machining plastics and brass. The subspindle is equipped with a two-jaw chuck for holding workpieces for milling contours. The machine can be inspected under production conditions at any time. It is in like-new condition. Total investment including accessories: €241,000. Equipped with a 12-station turret, all driven. Sale EXW 91413 Neustadt, Germany. Rbsdpfx Aajynnhwsaew

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, Rbsdpfx Aasynbd Eeasw flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Rjdpfxjyna Uio Aaasbw A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: good (used), Year of construction: 2001, Machine is in good working condition. Rsdpfsym T D Ujx Aaasbw Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2007, Fagor CNC lathe Rbsdpsym Ef Rjfx Aaajw Full specifications available in photos Machine in excellent condition

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle Rjdpfsymlhrjx Aaajbw - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe directly from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with a Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw measuring arm for manual tool measurement • Ball screw with enhanced precision, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for particularly large workpieces • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tool capability • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency stop impact switch greatly simplifies program setup • Belt-style chip conveyor • Worklight for complete illumination of the work area • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic turret head VDI 40 • All 12 turret stations powered by an integrated motor capable of speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree inclination • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with the door open • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant detection and machining • ShopMill step programming • Manage network drives • 3D simulation • Remote view/assistance SIEMENS OSS Plus Additional Package • 12 months; Item no. 3589020 • 24 months; Item no. 3589021 • 36 months; Item no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (factory option) Angular accuracy: 51 '' Repeatability: 20 '' Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Rodpoymk Uksfx Aaaebw Speed Range Speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle nose: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle taper: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical Spindle Drive motor power S1 continuous duty: 11 kW Drive motor power S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30%: 140 Nm Feed Force Feed force, X-axis: 8.4 kN Feed force, Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN 5480 Number of tool stations: 12 Drive motor power: 4.82 kW Max. permissible speed at tool coupling: 6000 rpm Max. tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Dimensions and Weight: - Max. width/depth: 2300 mm - Approx. length: 2530 mm - Approx. width/depth: 1595 mm - Approx. height: 1795 mm - Approx. weight: 2600 kg Working Range: - Chuck diameter: 150 mm - Chuck clamping actuation: hydraulic - Centre height: 223 mm - Centre distance: 850 mm - Swing diameter over bed: 446 mm - Swing diameter over gap: 520 mm - Swing diameter over cross slide: 240 mm - Bed width: 300 mm Servo Torque: - X-axis: 6 Nm - Z-axis: 8.5 Nm Spindle Speed Range: - Number of speed ranges: 1 - Spindle speed range: 10 – 3000 rpm Electrical Data: - Drive motor power: 7 kW - Voltage: 400 V - Network frequency: 50 Hz - Total connected load: 23 kVA Accuracy: - Repeatability: ± 0.005 mm - Positioning accuracy: ± 0.005 mm Hydraulic System: - Motor power: 0.75 kW - Tank capacity: 50 l Ball Screw: - X-axis diameter: 25 mm - X-axis lead P: 5 mm - X-axis accuracy grade: C3 - Z-axis diameter: 40 mm - Z-axis lead P: 5 mm - Z-axis accuracy grade: C3 Coolant System: - Coolant pump power: 270 W - Tank capacity: 90 l Machine Data: - Spindle bore diameter: 40 mm - Drive motor torque: 33 Nm Tailstock: - Taper: MT 4 - Quill travel: 165 mm - Quill diameter: 52 mm Spindle: - Spindle nose: DIN ISO 702-1 No. 5 - Spindle bore/bar capacity: 52 mm Controller: - Type: Sinumerik 828D PPU 240 - System software: SW 24 - CNC memory: 3 MB - Look Ahead: 50 - Block change time: 3 ms - Number of tools: 128 Travel: - X-axis: 250 mm - Z-axis: 760 mm Vertical Spindle: - Drive motor continuous power S1: 7 kW - Drive motor S6-30% duty cycle power: 16 kW - Drive motor torque: 33 Nm Rsdpfx Aasymkwrsaebw - Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min Feed Force: - X-axis: 7.5 kN - Z-axis: 5.3 kN Tool Changer: - Type: hydraulic; VDI 30 - Number of tool stations: 8 - Max. square tool shank height/width: 20 x 20 mm - Max. boring bar diameter: 25 mm Features: - Siemens spindle and servo motors - Full enclosure with safety interlock - Standard with max. spindle speed up to 3000 rpm - Automatic central lubrication - Swiveling control panel - Tailstock cover - Electronic hand wheels for X and Z axes - Coolant system with 90-liter tank - RJ45 connection, USB port, and 230 V power socket - EMC (Electromagnetic compatibility) - Six leveling feet - Operator tools included SINUMERIK 828D Basic – COMPLETE PACKAGE - Safety Integrated - Remainder material detection and machining - ShopTurn step programming - Network drive management - 3D simulation - Graphical tracking Control: - 10.4” color display - 4:3 format - User-friendly SINUMERIK Operate software - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guides: - Rigid flat-bed guideways Ball Screw: - For high rapid traverse speeds on all axes - Reduced wear - High positioning and repeat accuracy

Condition: good (used), Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 1,000 mm, spindle bore: 107 mm, spindle speed (max.): 3,050 rpm, spindle speed (min.): 4 rpm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (max.): 3,050 rpm, Equipment: rotational speed infinitely variable, CNC Lathe GILDEMEISTER Model: CTX 600 Year of manufacture: 1997 Center height: 325 mm Center distance: 10,000 mm Work area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide cover: 480 mm Main spindle: flat flange 220 h5 Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 315 (400) mm Main drive: 58.5 kW 2-stage speed range Gear stage 1: 800 daN Gear stage 2: 1500 daN Speed: 4–3050 rpm Rbjdpfxjyl Nutj Aaajw Feed drive: Rapid traverse X-/Z-axis: 10/10 m/min Turret: Number of tool stations: 12 Tool holder shank: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 5080 x 3450 x 2000 mm Weight: 7,250 kg Viewing by appointment only Video can be sent on request. Machine is sold ex-works. Costs for removal and loading to be borne by the buyer.

Condition: used, Year of construction: 2011, functionality: fully functional, DMG Gildemeister CTX 500 Alpha V6 - Year of manufacture: 2011 - Control: Siemens 840D shop turn - Counter spindle - With Y-axis and C-axis - Turret: 12-position motorized VDI 30 Rbedpoylkuuofx Aaajw Additional equipment: - Hydraulic chuck - Chip conveyor - Coolant system - Interface for bar feeder - Workpiece catcher with conveyor belt

Condition: good (used), Year of construction: 2012, CNC Lathe Okuma Genos L200E-M with Gantry Control: OSP-200LA-R Year of manufacture: 10/2012 Internal machine no.: 13 Max. turning length: 380 mm Turning diameter: 200 mm Swing over bed: 450 mm Spindle speed: 107 - 4,500 rpm Spindle bore: 66 mm Turret: M-V12 (VDI) Tool rotation speed: 50 - 6,000 rpm Rapid traverse (m/min): X: 20 / Z: 25 Accessories/Equipment Gantry loader type ATPGR-03 for workpiece size Ø 20 - 150 mm, max. workpiece weight 2 x 3 kg (double gripper) for OKUMA Genos L200E-M Chip conveyor Touchsetter Hydraulic tailstock Redpeylkcrefx Aaaobw Coolant pump Tool package

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X1T132/23, turning diameter over cross slide: 350 mm, turning length: 650 mm, turning diameter: 350 mm, spindle bore: 42 mm, COLCHESTER HARRISON cycle-controlled lathe ALPHA 1350 XT, year 2008 Manufacturer: COLCHESTER HARRISON Model: 1350XT Machine No.: X1T132/23 Year of manufacture: 2008 Control system: FANUC ALPHA X-SERIES Technical Data Maximum turning diameter: 350 mm Turning length: 650 mm Spindle speed range: 0 - 3500 rpm Spindle bore: 42 mm Dimensions & Weight Rodpfeylbldex Aaaebw Length x Width x Height: 2400 x 1700 x 1500 mm Weight: 1800 kg