JL Goslar GmbH

Year of construction: 1978, condition: used, Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible. Lhsdpfx Aho Adt H Ts Sjn

Year of construction: 1987, condition: used, Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible. Lhodpfx Aj Aalp Eoh Ssn

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Lhedpfez S T Inox Ah Sjn Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Year of construction: 1974, condition: used, Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement. Ljdoz S Iupepfx Ah Sohn

Year of construction: 2017, condition: used, A mechanical eccentric press is offered. Mechanically operated press ram. Worktable with T-slots and a central through opening. Operating mode selector switch for single stroke and continuous stroke. Control panel with on/off pushbuttons. Emergency stop switch. Indicator light. Foot switch with protective cover. Side-mounted compressed air service unit. Protective guard in the press area. The machine features a heavy-duty press frame and a worktable for mounting dies. The press area is accessible via a hinged protective guard. Inspection possible by prior arrangement. Ljdpoz Sr I Tsfx Ah Sjhn

Condition: used, Sabatier metal peil production line - for buckets For production of buckets with the following sizes: Lsdpez Sp Htsfx Ah Sshn - Conical bucket with crown lid, capacity 10 l / 12 l / 15 l / 20 l - Conical bucket with a nominal capacity of 10 l / 12 l / 15 l / 20 l with a slip-on lid and a ring closure with a lever clamp The line is in very good working condition, in production, available immediately.

Year of construction: 2020, condition: ready for operation (used), overall weight: 16,500 kg, total height: 3,500 mm, pressing force: 250 t, product length (max.): 4,000 mm, stroke length: 400 mm, number of axes: 6, This hydraulic press manufactured in 2020 features a pressing force of 250 t and a working length of 3,100 mm. It is equipped with an ESA AUTOMOTION S640 touch screen CNC control and an electronic color graphical programmer. If you are looking to get high-quality pressing capabilities, consider the GILARDI Italy 3.25 machine we have for sale. Contact us for further details. • Programming system: Electronic color graphical programmer • Working length: 3,100 mm • Distance between columns: 2,700 mm • Throat depth: 500 mm • Table-to-ram distance: 730 mm • Fast approach speed: 150 mm/s • Working speed: 10 mm/s • Return speed: 160 mm/s • Motor power: 18.5 kW • Maximum pressure: 280 bar • Electrical: Three-phase, 400 V, 50 Hz, 36 A Lhjdpfxjz Sbyme Ah Sjn

Condition: used, Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible. Lhodpfx Ajz R Uxash Sen

Year of construction: 2003, condition: used, Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible. Lsdoz R A Rvjpfx Ah Sjhn

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10150, General Description For sale is a professional assembly press manufactured by the Spanish company Enginyeria Teknics Sabadell, S.L. This unit dates back to 2014 and is factory-designated as "PRENSA REAR WAVE 2". The machine is equipped with an advanced electromechanical actuator (pressing module) from KISTLER, with a nominal pressing force of 60 kN. This system is designed for precise pressing, assembly, and force testing processes in industrial applications. Technical Data (TEKNICS Press) Manufacturer: Enginyeria Teknics Sabadell, S.L. (Spain). Machine Number: 10150. Serial Number: 338.003 6775. Year of Manufacture: 2014. Lodpfjz Rz Rhox Ah Sohn Power Supply: 400 V / 50 Hz. Power: 25 kW. Required Pneumatic Pressure: 6 bar. Machine Weight: 800 kg. Certification: CE marking. Technical Data (KISTLER Actuator) Manufacturer: KISTLER (Dr. Steiger Mohilo+Co GmbH). Type: 2151B60304002. Model: NCFH 60 400 300 B H C G. Nominal Force: 60 kN. Serial Number: 2683373. Actuator Weight: 87 kg. Certification: CE marking. Construction and Equipment Stable construction with a dedicated protective enclosure consisting of black mesh panels and yellow profiles. The operator's work area is protected by optical safety barriers (light curtains). The work area features a massive mounting plate with threaded holes and a set of tools, dies, and adapters to facilitate part positioning. A free-standing control cabinet is included with the press. The cabinet door houses the operator panel (HMI) with a display, the main power switch, and an emergency stop button.

Condition: excellent (used), functionality: fully functional, Haeger 618 MSPe-5 Year of manufacture: 12/2023. The system has been fully overhauled and serviced and is in perfect working order. Lodpfx Ahjz Rxkfj Sjhn The system can be inspected at any time.

Condition: used, Year of construction: 1991, Offered for sale: Hydraulic CNC press brake with 5-axis backgauge. Bending length: 3060mm. Pressing force: 1300kN, max. stroke: 215mm, max. operating pressure: 340bar, usable installation height: 385mm. Inspection possible by arrangement. Lsdpoz Rn D Iefx Ah Sjhn

Year of construction: 2008, condition: used, Max. press force: 82kN, total stroke: 200mm, power stroke: 12mm, min./max. air pressure: 3bar/6bar, machine weight without tooling: 610kg. Inspection possible by arrangement. Lhodpfxoz I Dcmo Ah Sjn

Condition: used, Power supply: 380V, frequency: 50Hz, rated current: 25A, backup fuse: 35A, control voltage: 220V. Documentation available. Inspection possible by arrangement. Lsdsz I Dctjpfx Ah Sshn

Year of construction: 2015, operating hours: 20,652 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: S7-300 PLC, overall weight: 10,500 kg, total width: 2,405 mm, total height: 3,029 mm, pressing force: 357 t, table length: 1,290 mm, table width: 1,200 mm, Hydraulic press manufactured in 2015. This WINTER VSP 350 features a holding force of 3500 kN and a trimming force of 2500 kN. It offers a holding stroke of 50 mm and a trimming stroke of 100 mm, ensuring efficient operation. With a robust table size of 1290 x 1200 mm, this machine is designed for heavy-duty tasks. If you are looking to get high-quality pressing capabilities, consider the WINTER VSP 350 hydraulic press we have for sale. Contact us for further details. MACHINE • Holding Stroke: 50 mm • Holding Speed at 500 kN: approx. 30 mm/s • Holding Speed at 3500 kN: approx. 4 mm/s • Holding Return Speed: 60 mm/s • Trimming Force: 2500 kN • Trimming Stroke: 100 mm • Trimming Speed at 500 kN: approx. 30 mm/s Ljdpfx Ahez H Ivzj Sohn • Trimming Speed at 2500 kN: approx. 5 mm/s • Trimming Return Speed: 60 mm/s • Impact Damping Stroke: 20 mm • Opening Width: 1000 mm • Machine Depth: 1230 mmHYDRAULIC UNIT • Hydraulic Unit Weight: 13000 kg • Pump Power: 2 × 15 kW • Cooler Power: 3 kW • Pump Unit Power: 3 kW • Hydraulic Pipe Diameter: 2 × Ø38 × 4 mm • Hydraulic Pipe Diameter: 2 × Ø30 × 4 mm • Hydraulic Pipe Diameter: 1 × Ø20 × 3 mm • Colour Hydraulic Unit: RAL7004 • Rated Voltage: 400 V • Frequency: 50 Hz • Rated Current: 97 A • Installed Power: 36 kW • Operating Hours Hydraulic Unit 1: 20652.8 h • Operating Hours Hydraulic Unit 2: 20641.8 h • Operating Hours Hydraulic Unit 3: 20802.8 h

Year of construction: 2018, operating hours: 2,154 h, condition: ready for operation (used), overall weight: 11,000 kg, total width: 1,850 mm, total height: 2,890 mm, pressing force: 204 t, product length (max.): 3,580 mm, stroke length: 260 mm, Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details. • Hydraulic pressure: approx. 276 bar • Nominal power: approx. 15.3 kW • Power supply: 400 V / 50 Hz / 3 Ph • Production hours: 2,154 h Additional equipment • Included tooling: • V16 H80 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×2 mm Lhedpfez Hl Iuex Ah Sjn • V50 H60 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • V12 H80 mm: 10 ×2 / 15 / 20 / 195 / 285 / 295 / 835 ×3 mm • V80 H80 mm: 835 ×3 mm • V16 / V22 / V32 / V50: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • Additional tooling information: • ID 1177 – Standard – 85° – Height 65.50 mm – Radius 3.00 mm • ID 1271 – Standard – 60° – Height 115.00 mm – Radius 0.80 mm • ID 1284 – Standard – 60° – Height 135.00 mm – Radius 0.80 mm • TS-10.516 – Standard – 60° – Height 85.00 mm – Radius 0.80 mm Technical Specification Bending Length 3100 mm

Year of construction: 2018, condition: ready for operation (used), overall weight: 4,100 kg, total width: 1,810 mm, total height: 2,780 mm, pressing force: 76 t, product length (max.): 7,060 mm, stroke length: 160 mm, Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details. - Max. Installation Height: 885 mm- Min. Installation Height: 725 mm- Throat Depth: 250 mm- Max. Ram Stroke: 160 mm- Ram Speed "DOWN" (AB): 2 - 30 mm/s- Ram Speed "UP" (AUF): 15 - 68 mm/s- Press Table Height above Floor (with / without oil pan): 730 / 700 mm- Usable Shaft Length: 3000 mm- Usable Shaft Diameter: ø 120 / ø 170 mm- Straightening Bridge Length: 2000 mm- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each- Main Pump Drive Power: 7.5 kW- Network Type: L1-3/N/PE (TN-S)- Frequency: 50 Hz- Operating Voltage: 400 V~- Control Voltage: - VDC- Connected Load: 7.5 kW / 9 kVA- Nominal Current: 14.5 A- Supply Line / Fuse: 32 A CEE / 32 A- Hydraulic Tank Capacity: approx. 280 Liters- Oil Quality: DIN 51502/51524 HLP 46, ISO 3448 (DIN 51519) ISO VG 46- Machine Dimensions (Width x Depth x Height): approx. 7060 x 1810 x 2780 mm- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg- Emission Sound Pressure Level Lpa: 78.5 dB(A)- Uncertainty Kpa: 8 dB(A) Lodjz E Igwjpfx Ah Sehn

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Lhsdpfx Ahsz D Hzdo Sen

Year of construction: 2018, operating hours: 7,062 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: Simatic HMI, overall weight: 50,000 kg, total height: 4,900 mm, pressing force: 459 t, table length: 1,000 mm, table width: 1,800 mm, This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours. Machine Benefits Ledpfoz D Emfex Ah Sohn Qualitative Machine Benefits • Excellent condition, low hours. Technical Machine Benefits • Ram size 900x1400 mm • Adjustable stroke 22-250 mm • Ram adjustment 120 mm • Max. Die surface 900x1650 mm • Max. Upper die weight 900 kg Dimensions Machine Depth 3100 mm

Year of construction: 1987, condition: used, Control: Cybelec DNC 600S. Inspection by appointment possible. Ledez Dkkcspfx Ah Sjhn

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER Lhsdpfxjz A Aw Es Ah Ssn PRESSURE: 5 x 80 tons TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm

Year of construction: 1998, condition: ready for operation (used), pressing force: 102 t, number of axes: 4, This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details. • Tool clamping/tooling system: Promecam Lsdpezypubsfx Ah Sohn • CNC control: ESA S530 • Condition: Overhauled/revised, ready for operation Additional equipment • Laser Safe safety system Technical Specification Bending Length 4000 mm

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) • Oil seals: Replaced • Oil: New • Warranty: Included • Condition: Machine guaranteed / ready for sale Lodpfxozypi Es Ah Sshn Technical Specification Bending Length 3100 mm

Condition: used, Year of construction: 1998, Press force: 3500 t Stroke: 900 mm Frame width: 3200 mm Side frame opening: 2200 mm Shut height (stroke up): 1700 mm Table area: 3150 x 2150 mm Table height above floor: 500 mm Ram area: 3150 x 2400 mm Downstroke speed: 400 mm/s Upstroke speed: 210 mm/s Lodszypa Rspfx Ah Sjhn

Condition: used, Year of construction: 1975, Press brake manufactured by FISCHER, model HAKS 10/3200. Pressing force approximately 100 tons. Year of manufacture 1975. Brief summary provided – a full technical translation will follow if required for this lot. Ledpozymazefx Ah Sjhn