IDS Trade GmbH

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Njdpfoy Ui Nqjx Ahzect Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: good (used), Year of construction: 2010, Ref. no.: 18624 Manufacturer: WITTMANN BATTENFELD Type: EcoPower 180/350 UNILOG B6S Nedpfoy Uiwhox Ahzsct Year of construction: 2010 Clamping unit Clamping force: 180 ton Opening stroke: 480 mm Distance between tie bars: 570 x 520 mm Mould height min.: 225 mm Mould height max.: 550 mm Platen size (h x v): 810 x 805 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 163 g Injection pressure: 2083 bar Measurements and weight Dimensions: 5,2 x 1,6 x 2,2 m Machine weight: 6800 kg Further information: Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen. Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und stabile Produktionsqualität. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen kann die EcoPower Serie – abhängig von der Anwendung – Energieeinsparungen von ca. 60% bis 80% erreichen. Zusätzlich bieten die Maschinen eine reduzierte Wärmeentwicklung, einen ruhigen Lauf sowie eine saubere Produktionsumgebung. Die integrierte UNILOG B6 / B6P Steuerung ist bekannt für ihre benutzerfreundliche Bedienung, zuverlässige Prozesskontrolle und stabile Langzeitleistung. In Kombination mit der hochdynamischen Servotechnologie und dem vibrationsarmen Betrieb eignet sich die EcoPower Plattform besonders für technische Kunststoffteile, elektronische Komponenten, Automobilanwendungen und medizinische Produktionen. Die Wittmann Battenfeld EcoPower Serie zählt auch heute noch zu den zuverlässigsten und energieeffizientesten vollelektrischen Spritzgießmaschinenplattformen auf dem Markt.

Condition: good (used), Year of construction: 2010, Ref. no.: 18623 Manufacturer: WITTMANN BATTENFELD Type: EcoPower 180/350 UNILOG B6S Year of construction: 2010 Clamping unit Clamping force: 180 ton Opening stroke: 480 mm Distance between tie bars: 570 x 520 mm Mould height min.: 225 mm Mould height max.: 550 mm Platen size (h x v): 810 x 805 mm Injection unit Screw diameter: 30 mm Injection volume: 124 cm³ Shot weight: 120 g Injection pressure: 2823 bar Measurements and weight Dimensions: 4,8 x 1,6 x 2,2 m Machine weight: 6800 kg Further information: Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen. Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und stabile Produktionsqualität. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen kann die EcoPower Serie – abhängig von der Anwendung – Energieeinsparungen von ca. 60% bis 80% erreichen. Zusätzlich bieten die Maschinen eine reduzierte Wärmeentwicklung, einen ruhigen Lauf sowie eine saubere Produktionsumgebung. Die integrierte UNILOG B6 / B6P Steuerung ist bekannt für ihre benutzerfreundliche Bedienung, zuverlässige Prozesskontrolle und stabile Langzeitleistung. In Kombination mit der hochdynamischen Servotechnologie und dem vibrationsarmen Betrieb eignet sich die EcoPower Plattform besonders für technische Kunststoffteile, elektronische Komponenten, Automobilanwendungen und medizinische Produktionen. Nodpfxjy Uiwbo Ahzect Die Wittmann Battenfeld EcoPower Serie zählt auch heute noch zu den zuverlässigsten und energieeffizientesten vollelektrischen Spritzgießmaschinenplattformen auf dem Markt.

Condition: excellent (used), Year of construction: 2011, clamping force: 2,400 kN, screw diameter: 50 mm, displacement volume: 540 cm³, injection pressure: 2,470 bar, injection weight: 491 g, mold height (min.): 350 mm, Battenfeld HM 500/3400 Injection Moulding Machine General Specifications Clamping force: 240 t Nodpfoy Uhbfsx Ahzoct Year of manufacture: 2011 Control system: Unilog B6 Injection Unit Unit designation: ... / 1330 Screw diameter: 50 mm Injection pressure: 2470 bar Injection volume: 540 cm³ Screw L/D ratio: 22 Clamping Unit Clamping system: 240 / ... Clamping force: 240 t Platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Ejector stroke: 200 mm Mould height: 350 mm Opening stroke: 725 mm Max. daylight (max. platen distance): 1075 mm Dimensions and Weight Weight: 10,000 kg Dimensions (L x W x H): 5.5 x 1.8 x 2.4 m

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly Ncedpfoy Ug Ahjx Ahzot ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits RC 200 integrated with C30 E handheld control unit

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Ncodjy Ub D Topfx Ahzot Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production Njdpfx Ahjy Ub D Hjzoct The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18620 Manufacturer: DEMAG Nsdpfxjy Ub Dyo Ahzjct Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Nedpfx Asy Ub Dtehzsct Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Condition: good (used), Year of construction: 2012, Ref. no.: 18610 Manufacturer: DEMAG Type: IntElect 160/520-340 NC5 Year of construction: 2012 Clamping unit Clamping force: 160 ton Opening stroke: 495 mm Distance between tie bars: 520 x 520 mm Mould height min.: 275 mm Mould height max.: 585 mm Platen size (h x v): 760 x 785 mm Injection unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight: 139 g Injection pressure: 2180 bar Measurements and weight Dimensions: 5,4 x 1,5 x 2,1 m Machine weight: 7600 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment Ncedpfx Ahjy Ub Dmozet * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Ncsdpoy T Sm Nsfx Ahzst delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar Nodpfx Ahoy T Hx Hjzjct MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 424227, clamping force: 4,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, injection weight: 1,304 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 4,200 kN Platen size (H x W): 1,270 x 1,200 mm Tie bar spacing (H x W): 800 x 800 mm Minimum mold height: 380 mm Maximum mold height: 1,020 mm Max. opening stroke: 1,400 mm Screw diameter: 80 mm Injection volume: 1,433 cm³ Shot weight: 1,304 g (PS) Max. injection pressure: 1,829 bar Max. temperature: 375 °C MACHINE DETAILS Supply voltage: 400 V Phases: 3~ Frequency: 50 Hz Total current consumption: 237 A Fuse rating: 250 A Pump power: 75 kW Heating power: 36 kW Dimensions & Weight Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m Ncsdpfxjy T Hwis Ahzet Machine weight: approx. 22,000 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 198346, clamping force: 3,600 kN, screw diameter: 70 mm, injection pressure: 2,000 bar, injection weight: 984 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 3,600 kN Ncedpfx Ahey T Hrmezot Platen size (H x W): 1,040 x 1,040 mm Column spacing (H x W): 720 x 720 mm Minimum mold height: 300 mm Maximum mold height: 300 mm Maximum opening stroke: 1,400 mm Screw diameter: 70 mm Injection volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 55 kW Heating capacity: 30.3 kW Net weight with control cabinet: 17 t

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Clamping platen daylight: 950 mm Nsdpfoy Txgcsx Ahzect Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Injection volume: 392 cm3 Shot weight: 359 g Injection pressure: 2000 bar Working hours: 10.444 Core pullers: 1x

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6,000 h, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 771 g, Electrical injection moulding machine manufactured in 2023. This SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 features a clamping force of 2,200 kN and a maximum mold opening stroke of 550 mm. The machine offers a daylight between platens of 1,150 mm and an injection unit size of 1400. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 660 x 660 mm • Mold platen size (H x V): 920 x 920 mm • Mold opening stroke (max): 550 mm • Daylight between platens (max): 1,150 mm • Mold height (min–max): 300–600 mm (optional: 300–800 mm) • Ejector stroke: 160 mm • Ejector force: 55 kN • Injection unit size: 1400 • Screw diameter options: 50 / 60 / 70 mm • Injection stroke: 220 mm Ncjdpfx Ajy Tv Iwohzst • Calculated stroke volume: 432 / 622 / 847 cm³ (with 50 / 60 / 70 mm screw) • Max. shot weight (PS): 393 / 566 / 771 g (with 50 / 60 / 70 mm screw) • Max. injection pressure: 2,420 / 2,000 / 1,470 bar (with 50 / 60 / 70 mm screw) • Injection speed (max): up to 350 mm/s (high-performance S-drive specification) • Drive concept: All-electric with proprietary direct-drive technology • Core pull interfaces: 2 (hydraulic/electric options)

Condition: used, Year of construction: 2013, Injection molding machine Arburg 630H 2500-1300, year of manufacture 2013 Injection molding machine Husky H4 300 RS55/50, year of manufacture 2018 Ncsdpfx Ahsy Tv E Nezjt

Condition: excellent (used), Year of construction: 2017, Krauss Maffei KM 350-3000 CX injection molding machine Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on industrial PC technology with real-time Ethernet, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running processes (ProcessDesigner). Plasticizing unit Complete plasticizing unit for thermoplastics, with abrasive protection, 80 mm screw diameter, equipped with a backflow valve and an open nozzle. TECHNICAL DATA OF THE MACHINE – STANDARD VERSION Clamping unit Clamping force: 3500 kN Opening force: 221 kN Dimensions of the mounting plates (h x v): 1060 x 1095 mm Distance between columns (h x v): 710 x 710 mm Mold opening stroke: 920 mm Ncodpfsy Tp Rlex Ahzot Minimum mold height: 380 mm Maximum opening width: 1300 mm Ejector stroke: 250 mm Ejector force front/rear: 95/49 kN Injection unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1855 bar Injection volume: 1608 cm³ Injection weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticizing rate: 109.5 g/s Electrical and hydraulic equipment Rated power of the pump motor: 75 kW Installed power of the heaters: 36 kW Number of heating zones in the cylinder: 7 Dry cycle time / stroke according to Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 dm³ Dimensions and weight Net weight including control cabinet: 16.3 t Machine dimensions (l x w x h): 7.21 x 2.17 x 2.25 m

Condition: excellent (used), Year of construction: 2015, Clamping force: 180 t Screw diameter: 35 mm Distance between tie bars V: 520 mm Distance between tie bars H: 570 mm Ncsdpfx Ahoy Tn Enozst Shot volume: 159 cm3 Type: Multicomponent Drive: Hydraulic Hydraulic cores: 3 + 1 \+ Rotary table \+ Robot wittmann

Condition: excellent (used), Year of construction: 2016, Clamping force: 350 t Screw diameter: 45 mm Ncodsy Tn Dwjpfx Ahzet Distance between tie bars V: 720 mm Distance between tie bars H: 800 mm Shot volume: 280 cm3 Type: Horizontal Drive: Hydraulic Hydraulic cores 1+1 \+ robot Wittmann

Condition: excellent (used), Year of construction: 2014, operating hours: 50,512 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 470C-1500-400 injection molding machine with sorting flap (256) Number: 256 Availability: in stock Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 30.4 Working hours [h]: 50.512 Weight [kg]: 4850 Ncjdoy Tmmwepfx Ahzjt Dimensions [mm]: 4500×1700 Feed hopper: NO Core string: 2x Robot socket: euros 67 Air valve: Yes

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, Sumitomo DEMAG Systec 120/470-600 NC 5 Year of manufacture: 2007 Nodpfjy Tcu Dex Ahzoct Control system: NC 5 Screw diameter: 45mm Injection volume: 323ccm / 294g Clamping force: 1200KN Tie-bar spacing: 470mm x 470mm Minimum mould height: 150mm Maximum plate spacing: 850mm (900 / 950 with WA) Opening stroke: 800mm Ejector stroke: 180mm The machine is currently being overhauled and tested for functionality.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,858 h, clamping force: 4,200 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine. Ncsdpsy S Tw Hsfx Ahzst • Injection capacity (PP): 1.2 kg • Minimum mould dimensions: 380 mm • Tie bar spacing: 800 x 800 mm • Maximum mould opening: 1400 mm • Working hours: 44,858 h

Condition: ready for operation (used), Year of construction: 2012, operating hours: 46,424 h, clamping force: 3,500 kN, screw diameter: 80 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details. Njdpsy S Tvvjfx Ahzjct • PP injection capacity: 640 g • Minimum mould dimensions: 380 mm • Tie bar spacing: 710 × 710 mm • Maximum mould opening: 1260 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 49,627 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Mould dimensions (min.): 320 mm • Tie bar spacing: 630 × 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,627 h Nsdpfx Aoy S Tq Hjhzjct