Multi-Lane Cup Filling and Closing Machine

AMTEC ML3-60

Condition: excellent (used), Year of construction: 2019, ROTOTHERM REC1280 Rotary Oven, Gas-Fired The Rototherm oven with a rotary rack is designed for baking: – bread – tin/toast bread – buns/rolls – small pastries Ffsdpfx Aow Uih Sjbusu Technical specifications: Rotary wheel diameter: 1260 mm Max tray size: 600 x 1000 mm Baking surface with 21 shelves: 12.6 m² Max rotary plate load: 350 kg Baking chamber height: 1830 mm Max rack height: 1813 mm Minimum room height: 2830 mm Dimensions (W/D/H): 1740 x 1900 x 2400 mm Net weight: 2400 kg NAVIGO II control: yes The ROTOTHERM Green rotary oven by Werner & Pfleiderer is a new-generation rotary oven providing up to 25% energy savings compared to the standard RE oven. Recipes are protected by access codes. The system allows programming of up to 250 recipes with 20 steps each.

Condition: like new (used), Grote 613-VS2 slicer in beautiful, near new condition. Conveyor and a few parts have been lost so will be replaced with brand new units from Grote. Ffedpfxomqk Ubo Abusu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Ffjdpfx Absv Abm Eeuou Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Dimensions: 4900 mm x 1500 mm x 2300 mm.

Year of construction: 2010, condition: used, Mettler Toledo PAS 3012 check-weigher with labeling machine. The labeling had can be electrically moved in all directions for an accurate positioning of the labels. - Max. weight: 6KG Ffodpfxoivnqcj Abusu - Min. weight: 0.020KG - E: 0,001KG - Rated for 70 packs per minute

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Ffedotz H T Dopfx Abueu

Condition: excellent (used), tank capacity: 500 l, The Seydelmann K506 AC8 500 L Cutter is an essential piece of equipment for companies seeking advanced performance in food processing. Its large-capacity bowl facilitates the processing of large volumes, improving production rates. Furthermore, its robust stainless steel design ensures remarkable longevity, even under intensive use conditions. Fsdpovunpwefx Abujfu Furthermore, its high-performance blades guarantee consistent and precise chopping, preserving the texture and quality of ingredients. This cutter is perfectly suited to the requirements of various applications, from meats to vegetables to delicate preparations. Furthermore, its user-friendly interface offers significant ease of use, reducing operator training time and contributing to greater productivity. Furthermore, the ease of cleaning and accessibility of its main components minimize downtime, ensuring optimal process continuity. Finally, the easy integration of the Seydelmann K506 AC8 500 L Cutter into existing production lines allows you to modernize your workshop without disrupting your operations. By choosing this model, you are opting for a reliable and efficient solution, capable of meeting the strictest standards of the food industry. Technical specifications: Tank capacity: 500 L for processing large volumes Number of blades: 6 integrated knives for consistent chopping Power: Approx. 265 kW for sustained performance Rotation speed: Up to 4000 rpm for precise results Integrated cooling: Maintains the freshness of sensitive products Current: 450 Ampere GJ8Vj4Ze

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Container Max 180mm wide & 250 hight Fjdpfxsh Eazzs Abusfu as-is or tested and adjusted to costomer needs

Condition: used, The TREPKO PKG 1 is equipped with a single stage of all station , the filling head are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Trepko cup fillers are mainly driven by a main motor converting the movement in an INDEX type gear box, signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. The machine was used for filling Cheese in small rectangular cups, in regards of change overs to 71,75,80,95 mm OUTSIDE DIAMETER Cups we can offer this service in-house. Contact us for more information. Capacity: 2400 c/h (40cps per minute ) Filling volume: 50-500 gr Prefilling: Fruits or flavours Cup dispensing: Automatic Lid applicator: Automatic Sealing: Automatic Out feed conveyor: Automatic E: 3 phase / 50 hz Control panel: PLC SIEMENS Cup format: Currently rectangular on order we can change to your cup size Loaction: IN STOCK Sale: The machine can be sold "as is " TLC Needed or Fully Refurbished. Contact us for more information. Fjdpfx Ajuruf Aobuofu

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Fjdpfxedyl H Ns Abusfu Picture: sister device

Condition: used, Year of construction: 2012, operating hours: 20,233 h, Used Tetra Pak Cap Applicator 30/Flex for Helicap23 2012 The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a capping machine designed and manufactured by Tetra Pak® in 2012. This machine is specifically designed for applying plastic screw caps onto containers, ensuring secure sealing and efficient production. With a speed of 9600 bottles per hour (BPH), it offers a high-capacity solution for the packaging industry. Fsdpfx Abevgufpsuofu Specifications: Manufacturer: Tetra Pak® Model: 30 Flex For Helicap 23 Year: 2012 Speed: 9600 BPH This capping machine in suitable for 1000 slim format Cap Type and Rotation Direction: The capping machine is compatible with plastic screw caps, providing a reliable closure mechanism. The rotation direction of the machine is clockwise, ensuring proper application of the caps onto the containers. Current State and Safety Features: Currently, the Tetra Pak Cap Applicator 30/Flex for Helicap23 is in storage. It is equipped with safety features to ensure the well-being of operators and maintain a safe working environment. Manuals and Machine Hours: Accompanying the machine are the necessary manuals, which provide instructions for its operation, maintenance, and troubleshooting. These resources facilitate efficient usage and upkeep of the capping machine. As for its usage history, the machine has been operated for approximately 20,233 hours. Electrical Data: The machine requires an electrical supply of V: 400, kW: 6.7, and operates at a frequency of 60 Hz. These specifications ensure the machine’s optimal performance and power consumption within the specified parameters. Conclusion The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a reliable capping machine manufactured by Tetra Pak® in 2012. With its capability to apply plastic screw caps at a speed of 9600 BPH, it offers a high-capacity solution for efficient packaging processes. Equipped with safety features and accompanied by manuals, this capping machine is designed to provide secure sealing and consistent performance, making it a valuable asset for the packaging industry.