Pressure and Vacuum Pump

Becker VCL 60 DV

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ppodpjh Axd Njfx Am Tsw

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Circle blade size: 6830 x 41 x 1,3mm Power: 7.5kW Length: 4600mm Ppedpfeu R R Acjx Am Tow Width: 2150mm Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Podpfx Aomw Ukcem Tepw Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: used, Year of construction: 1970, Weiler lathe with tailstock. Pjdpfx Amshtnu Te Topw

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Electric motor: VEM Podpfx Aoibwarsm Tepw Drive power: 30 kW Speed: 2935 rpm ! Price per unit!

Condition: good (used), total length undivided: 3000 mm edge heigth: 90 x 90 mm Podpfx Amohwwfxs Tepw

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels Pjdpfsgwbbqsx Am Topw OPTIONAL: WIRELESS BAR CODE SCANNER

Year of construction: 1988, condition: used, 480 x 325 mm; 14,000 units/hour; 7 stations 6 feeders 279 Ppsdpfxobnczbe Am Tsw Card gluing unit 1 folding feeder 1529 Stapling station 300 Trimmer

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw for HSS and carbide saw blades Pedeubbw Ajpfx Am Tjpw Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced

Condition: ready for operation (used), Year of construction: 2010, operating hours: 8,510 h, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Swivelling milling head: Controlled NC B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivelling range: -120° / +30° (X-axis travel reduced by 100 mm) • Tool changer: Pick-up system, 24 magazine positions • Table: Rigid, 1,000 mm x 600 mm • Control: Siemens 840D solutionline • 3D path control • 3D machining, 3D tool correction • TRANSMIT lateral surface transformation (milling of cylindrical paths - TRACYL) • CompCad compressor function for high-speed machining • Operating mode 4 (manual intervention with doors open) • Probing and calibration: • 3D measuring probe • 3D quickSET toolkit for checking/correcting 5-axis kinematic accuracy • Running time: 30,106 hours (spindle: 8,510 hours) • Note: Soft key buttons on the screen sometimes fail; operation may require the machine’s mouse pad or an external keyboard. Additional equipment Podpfx Amsy Ndklo Tepw • Chip conveyor • Optional: 125 SK40 tool holders Technical Specification Taper Size SK 40