Used lathes for sale (22)

Condition: good (used), Year of construction: 1986, - Max. material diameter: 65 mm - Spindle speed: 50 - 5,000 rpm - Turret with 8 stations - Pick-off spindle - Back-end machining, 3 axes - 2 cross slides - 2 longitudinal slides Guede Akda Eopfx Ad Rei - Coolant system - Chip conveyor - Several tool holders - Bar loader INDEX MBF

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Speed of powered tool: 4,000 rpm - Both turrets with internal cooling - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3200 mm Dimensions L x W x H: Gujdpfx Adjzxhmao Rji - Machine: 3400 x 1700 x 1800 mm - Bar feeder: 4000 x 1000 x 1400 mm - Chip conveyor: 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Guodpfx Aez Erdtjd Rsi Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm - guide tubes - chip flushing system - accessories: cams + gears Gsdpfxjz Iz D Is Ad Roui - SEMA bar feeder bundle (1989)

Condition: good (used), Year of construction: 1996, - SIEMENS Sinumerik control system - Bar diameter capacity: 60 mm - Max. main spindle speed: 6,000 rpm - Upper turret with 8 tool stations, including a synchronized spindle (all driven) - 2nd turret, lower: 6 tool stations (not driven) - C-axis - Working range of upper turret: X = 90 mm, Z = 280 mm - Working range of lower turret: X = 81 mm, Z = 80 mm - 2 driven/eccentric tools for rear-end machining - 3 non-driven/centric tools for rear-end machining - Incl. various tool holders - Dimensions L x W x H: 2,700 x 1,400 x 1,800 mm Gjdpj Akczxefx Ad Rsui - Weight approx. 2,900 kg + 1,000 kg (bar feeder) Accessories: INDEX MBF bar feeder magazine Chip conveyor

Condition: excellent (used), Year of construction: 2021, operating hours: 4,100 h, functionality: fully functional, turning length: 450 mm, turning diameter: 395 mm, total height: 2,100 mm, total length: 2,800 mm, total width: 1,850 mm, overall weight: 5,500 kg, 6-axis CNC turning center Control system: SIEMENS Sinumerik 828D including OPERATE + PPU290 Flat guides in all axes Main and counter spindle Max. speed: 6,000 rpm Turret with 12 stations (all driven) Tool speed: 5,000 rpm Y-axis Guedpfozzntrjx Ad Rji B-axis Travel: X = 235, Z = 580, Y = +- 52.5, B = 580 mm Bar capacity: 67 mm Including tool package Chip conveyor

Condition: good (used), Year of construction: 1986, - Max. material diameter: 65 mm - Spindle speed: 50 - 5,000 rpm - Turret with 8 stations - Pick-off spindle - Back-end machining, 3 axes - 2 cross slides - 2 longitudinal slides - Coolant system - Chip conveyor - Several tool holders Guedpfo Akc Txox Ad Rji - Bar loader INDEX MBF

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 305 mm, turning diameter: 210 mm, spindle bore: 56 mm, spindle speed (max.): 25 rpm, spindle speed (min.): 5,000 rpm, Revolver lathe with 12 stations (non-powered) Tool holder: MK 3 Gjdpfszl Ei Sjx Ad Rjui Chip conveyor Bar feed tube: IRCO DS 34.8 (year of manufacture 2013) Dimensions (L x W x H): - Machine: 4000 x 1700 x 1700 mm - Bar feed tube: 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, 6 spindles Parts collection device KADIGO tool monitoring system with IEMCA PRA 52/42 F bar feeder Gusdpfx Adozdtn Tj Roi (4m bar length) Accessories

Condition: good (used), Year of construction: 2004, Number of spindles: 8 Gusdpfx Adjw Rfcde Rsi Maximum bar feed in one station: 130 mm Maximum bar feed in two stations: 260 mm Maximum stroke of radial slide: 52 mm Adjustment of radial slide: +/- 12 mm Maximum stroke of axial slide: 72 mm Maximum stroke of tool spindles: 106 mm Adjustment of tool spindles: +/- 10 mm Speed of main spindles: 500 - 4,000 rpm Cycle time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg Bar loader: PIETRO CUCCHI (standard)

Condition: good (used), turning diameter over cross slide: 200 mm, spindle bore: 32 mm, turning diameter over bed slide: 315 mm, center width: 600 mm, turning length: 560 mm, quill stroke: 140 mm, overall weight: 1,750 kg, Digital display, Heidenhain Gjdjzzpx Nopfx Ad Rjui Collet system E163

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools Gjdpfx Aezggahjd Rsui - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital measuring device Godpfx Adsx Eah Aj Roui Centre height: 150 mm Swing over bed: 300 mm Turning diameter in the gap with face plate: 405 mm Distance between centres: 1000 mm 3-jaw chuck, with chip guard Multiflex toolholder Spindle speeds: 33 - 2000 rpm Chip tray Tailstock quill diameter: 45 mm, quill travel: 100 mm Taper: MK 3 Machine dimensions: 2500 x 800 mm Weight: 1180 kg Operating manual

Condition: repair required (used), Year of construction: 1989, 6 spindles Thread cutting Cross drilling Thread rolling Milling attachment Godpfx Adjv R Uqts Reui Many accessories Feed motor (curves) defective! with IEMCA PRA 40/32 P bar loader

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bored to Ø 36 mm 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar loader (4m bars) Accessories Godszdttijpfx Ad Reui

Condition: good (used), Year of construction: 2001, max. bar diameter: 42 mm max. speed: 4,500 rpm turret with 8 stations of which 4 are driven travel X = 110, Y = 50 mm 2nd turret with 8 stations of which 4 are driven speed of driven tools: 6,000 rpm Gjdpfsyxpzhjx Ad Roui 1 longitudinal slide 1 vertical slide pick-off spindle chip conveyor bar feeder IEMCA BOSS 545 weight 4,100 kg

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. 3-axis position display incl. RÖHM lathe chuck incl. quick-change toolholder 'set', Multifix system for further details see data sheet ELMAG warranty: 3 years (upon online registration after purchase) Delivery throughout Germany: FREE OF CHARGE NOT THE RIGHT MACHINE? Gujdpoy Iy H Hjfx Ad Roi WE ARE AN ELMAG AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE ELMAG RANGE! REQUEST A QUOTE!

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Godpfoy Izauex Ad Roui Request a quote!

Condition: good (used), Year of construction: 1992, functionality: fully functional, Spindle bore: 42 mm Swing over bed: 330 mm Multifix tool holder Tailstock with MK3 taper Speed: 1-4500 rpm Gjdeykahzspfx Ad Rsui

Condition: excellent (used), Image 01 Angle-driven tool holder Capto C5 Type 0.5.941.204 € 1,350 Image 02 Driven tool holder Capto C5 Type 0.5.941.104 - 102 181 € 850 Image 03 Angle-driven drill holder Guodjyttz Tepfx Ad Rei Capto C5 Type 0.5.941.204 - 137 533 € 1,950

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Gedpoyn Imysfx Ad Roui Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Godpfsymmdbox Ad Rsui Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375