Dozer blade

Eberlei mit Hardox Verschleißschiene

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Cgjdjuqmvkepfx Aphow Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Cgedsx D Eccopfx Aphow Dimensions Machine Depth 4308 mm

Condition: new, length 1700 mm Cgodpfx Apjxtfy Tohjw width 600 mm height over floor 860 mm table load capacity 400 Kg dimensions 1700 x 600 x 400 m weight 70 kg Workbench with 6 drawers and solid wood worktop Door compartment dimensions (W x D x H) 940 x 400 x 440 mm Small drawer dimensions (W x D x H) 460 x 400 x 120 mm Height adjustment: max. 40 mm

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4 kW Cgsdjvptrtspfx Aphsw Press Output per hour: depended on material Hopper opening: 1.044 x 1.044mm Controlled by PLC Hydraulic tank: 100l New exhibition machine with 5 operating hours

Year of construction: 1993, condition: used, machine/vehicle number: 8479307014, load bearing: 300 kg height of stroke: 10100 mm Codpfx Apjbh Uc Sjhjgw weight: 895 kg space needed: 1100 x 2250 x 2550 mm

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h Codpfx Apon Srvyjhogw -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Year of construction: 1975, condition: used, machine/vehicle number: 27749, height of centers: Schleif-Ø 250 mm distance between centers: Schleiflaenge 575 mm grinding wheel measures: 500 x 60 x 127 mm Cjdpoz Hc Iefx Aphjgw electrical connection: 380 V, ca. 9 kVA kW space needed: 2650 x 2600 x 2240 mm weight: 3400 kg

Condition: ready for operation (used), A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible. Cgedpsvf Ix Hsfx Aphsw

Condition: new, Year of construction: 2026, Metal-Fach Bale Wrapper Z529 self-loading Length: 2220mm Cjdpfxohlr Sxe Aphogw Width: 1420mm Height: 2650mm Weight: 780kg Tractor hitch: three-point linkage Machine drive: hydraulic Tractor power: 60KW Recommended flow rate of the tractor pump: 26 l/min Recommended hydraulic pressure: 14 MPa Bale size: 1200mm - 1500mm Film width: 750mm Standard equipment: Three-point linkage Film cutter Film pre-stretcher 750mm Manual control panel Semi-automatic or fully automatic wrapping process The Z529 bale wrapper is a machine that is attached to the front or rear three-point linkage of the tractor. It is loaded from below, which is done with the help of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm that rotates around the bale and has an attached film feed, which coats the bale rotating on the rollers with film. After the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. Wrapping a bale with a diameter of 1200 mm takes about two minutes. The compact dimensions of the machine allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feed, a hydraulically driven film cutter, and the control panel. Optionally, the machine can be equipped with a hydraulic bale unloader, which enables the placement of the wrapped bale on its base. ATTENTION!!!!! READ CAREFULLY!!!!! We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. We strongly recommend an inspection and examination so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after prior arrangement!!! Images are similar and may include optional accessories that are subject to an additional charge. The specified internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8.30 am to 5.00 pm, Saturday 8.30 am to 2.00 pm Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 2, This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. • Plasma cutting system: PNC 12 Extreme • Complete with water tank and base frame • Control: KOIKE D420 • Axis travels: 3000x1500 • Low hours, around 250 production hours Additional equipment Cgsdpfx Apox S Skfehjw • 1x oxyfuel torch (only tested once) • Hypertherm Powermax 1250 plasma power supply • Software for nesting and programming • Consumable parts