Transport trolley

Edelstahl für eine Pumpe

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Very good condition. Available immediately. Njdpfjd N Rb Dox Ah Ujlk

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar Nlodpfx Asdzqbljh Uek - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: good (used), working width: 1040 mm metal sheet thickness: 1,25 mm upper roller-Ø: 56 mm below roller-Ø: 56 mm weight: 190 kg Nledpfx Aodt Dqweh Ujk space needed: 1450 x 460 x 1030 mm

Condition: used, Year of construction: 2014, Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.   Nlodpfx Aheukafxe Uok

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Njdpfsl Hxmdsx Ah Uslk

Condition: used, gr. working width: 1100 mm for sheet thickness (steel sheet) up to approx.: 1 mm Nlsdscaxvhspfx Ah Ujk electr. drive: 380 V, 0,75 kW space requirement: 2330 x 600 x 1140 mm weight: 357

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX Nsdpfx Ahshx R Etj Ujlk - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Year of construction: 2003, condition: ready for operation (used), Capacity: 9350l, output: 180hl/h, max. operational overpressure: -1 to 4bar, operating temperature: 0-100°C, medium: beer, weight: 2t, with documentation, an inspection is possible, without mixing tanks and zip tanks. Nedpfx Aerl S Hxsh Uolk

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Complete brewery with a brew length of 20 hl – 25 hl and an annual capacity between 2,000 hl and 3,000 hl. The manufacturer is BREW TEK TM from Hong Kong. The system was installed in 2019 and approximately 200 brews have been produced on it. The plant is currently in operation and functioning flawlessly. Dimensions can be found in the images. Brew House • 3-vessel brewhouse 20 hl – mash tun, lauter tun, and wort kettle • 2 hot water tanks, each 20 hl • Plate heat exchanger with dual-stage operation • HopRocket for external hopping or fruit infusion Fermentation and Storage Technology – All tanks with jacket cooling • 2 fermentation vessels 25 hl – open fermentation with removable spray heads • 10 storage tanks – cylindrical-conical, 22.5 hl, 3.0 bar pressure – with spray heads • 2 pressure tanks 22 hl, 2.0 bar pressure – with spray heads • Cooling unit – glycol system with 10 hl tank and pump – digital control • CIP system with pump Nlodpfsw Rph Rjx Ah Uok • Grist mill 500 kg/h – mill, malt hopper, floor scale • Steam generator by Loos – with softened water tank, heated by LPG – can also be operated with fuel oil • Water softening system

Condition: used, gr. working width: 1040 mm Folding width approx.: 12 mm for sheet thickness up to approx.: 1 mm Drive motor, gear brake motor: 380 V, 0,55 kW space requirement: 1300 x 480 x 960 mm Nljdjcaxtxspfx Ah Ujk Weight: 334 kg