2 x 50 m³ aluminum silos, Ø 3,000 mm

Eichholz

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ Storage Silos made of Stainless Steel (Material 1.4301) (formerly used as plastic granulate silos) Technical Data / Dimensions Available units: 2 Volume: approx. 172,000 liters Type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 21,000 mm Total height: approx. 17,500 mm Weight: approx. 9,000 kg Specific gravity of medium: 0.6 to/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Specifications Internal shell material: stainless steel Remarks: Material grade 1.4301 Support type: base ring/stand collar Top base: conical top Slope: approx. 15% Bottom base: conical Cone angle: 60 degrees Top section: 1 x roof perimeter guard rail, height: approx. 1,200 mm 1 x crossover platform with guard rail 2 x lifting lugs 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded socket for overfill sensor 1 x flange DN 100 (filling) 1 x vent with hood Shell: 1 x operator access door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for empty indicator Bottom section: The silos terminate at the bottom in a 60° cone with an emergency shut-off slide valve and a mounted suction box (see photos). A triple-flight access ladder with back protection and rest platforms is optionally available. Giodpexvtvuofx Anlsu

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m Gijdovprv Ropfx Anlju The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: good (used), Year of construction: 2014, Ref. no.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of construction: 2014 Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. Gisdpoy Tliwsfx Anleu These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a running plastic production line and is in clean and good cosmetic condition. The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems. The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. BRANDED COMPONENTS INCLUDED IN THE SYSTEM Aerzen Vacuum / Blower Unit (Germany) Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies. Technical Details • Brand: Aerzen • Model: GM15L • Year: 2014 • Capacity: 12.50 m³/min • Motor Power: 11 kW • Max. Pressure: 1.25 bar • Operating Pressure: 1.0 bar • Weight: approx. 626 kg Advantages • High-efficiency German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for centralized vacuum systems Rittal Industrial Control System The system is equipped with a Rittal industrial control cabinet. Rittal is a globally recognized premium brand in industrial automation and control systems. Features • Industrial control cabinet • Operator control system • Integrated safety circuits • CE-compliant construction Omron Safety Sensors The machine is equipped with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Safe working area monitoring • Compatible with automation systems DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems. Technical Details • Brand: DMN Westinghouse • Model: ALD 200-6 • Low-dust controlled material transfer • Suitable for granule and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for centralized conveying systems

Year of construction: 2007, condition: used, functionality: fully functional, 5 x 148 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of construction: 2007 Volume: approx. 148,000 liters Container type: Silo Condition: used Suitable for food: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Properties Inner shell material: Aluminium Notes: Material grade: AlMg3 / AlMgSi3 Support design: Foot ring / stand collar Top bottom: cone roof Slope: approx. 15 % Bottom type: cone Cone angle: 90 degrees Top section: Godpfx Aoxqr Ekenleiu 1 x roof edge railing, height: 1,200 mm 1 x crossover walkway with railing 2 x crane eyes 1 x manway DN 600 with vent nozzle mounted 1 x connection flange for level measurement 1 x nozzle for level indicator 1 x flange DN 100 (filling) Shell: 1 x service door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for level indicator Bottom section: The silos end at the bottom in a 90° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Gjdpfxsqagl Hs Anloiu Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing documentation Drawing

Condition: used, Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function:Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hour Motor power:15 kW Electrics: 380V/ 50 Hz/ 3 Phase Bowl speed: 1450 rpm Godpfsyc Rtfsx Anlsiu Tools Base PlateNew Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function: Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hour Motor power: 15 kW Bowl speed: 1450 rpm Service Spare Parts: Dairy Machinery UK

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Gisdpfjvmidyjx Anlsu Connections in the topsoil: 1 vent nozzle with hood DN 200 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box otherwise as per sketch and photos

Condition: excellent (used), Control: Heidenhain TNC 310 With dividing head Travel X/Y/Z 500/250/160 mm Travel W 480 mm Gijdpfxewkrn Is Anleu Clamping area (L x W) 885 x 320 mm Permissible table load 250 kg Distance table to spindle nose 0 – 605 mm Feed rate X/Y 1 – 2000 mm/min Feed rate Z 1 – 1200 mm/min Tool quick-change system SF 32 Speed range (infinitely variable): 9200 rpm Drive power 5 kW Space required (W x D x H) 1850 x 2550 x 2400 mm

Condition: new, Year of construction: 2025, Efficient cooling systems with R290 – air-cooled, reliable, and environmentally friendly. Our models cover a performance range from 20 to 800 kW and offer flexible options with or without free cooling. Advantages: - Environmentally friendly R290 refrigerant with low global warming potential - Air-cooled, with integrated pump and tank Gedpfxsfqllws Anlsiu - Options: with free cooling – use of outside air for additional cooling, reducing power consumption especially during cooler months - Scalable from 20 to 800 kW to suit your requirements - State-of-the-art control system Customised consulting, planning, and sizing Delivery time depends on configuration and equipment Sustainable operation thanks to low CO2 emissions and reduced operating costs We are happy to advise you on the version best suited to your requirements.

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Godpfx Anjiq U Tqsloiu