Electric 4-wheel forklift

EP CPD50L1 + Joystick

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 2 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,310 mm, empty load weight: 7,000 kg, drive type: Elektro, construction width: 1,550 mm, Electric 4-wheel forklift Load center: 500 ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: New Front tires type: Superelastic Front tires size: 28x12.5-15 Rear tires type: Superelastic Rear tires size: 23X10-12 Battery voltage: 80V Sideshifter, fork positioner, Ibedpfxjvgh Epj Agpjd Image serves as symbolic representation - Fork dimensions: 150x55x1150 mm - Joystick control lever and driving direction switch in the armrest - USB charging sockets - Rear window heating 3rd valve, 4th valve, rear working light, front working light, heater, full cabin, CE certificate,

Year of construction: 2020, condition: good (used), -KOM 3037- An ABUS gantry crane is offered here, which can lift loads of up to 500 kg. This gantry crane also has four cross bridges. Type: free-standing gantry crane system Manufacturer: Abus Year of construction: 2020 Number of cross bridges: 2 Length travel drive: manual by hand Cross travel drive: manual by hand Lifting capacity per crane hoist: 500kg Number of vertical supports: 4 Power supply: trailing cable - lengthways & power rails - crossways Travel paths - usable area Ijdpfovw Adnjx Agpobd Length: approx.: 13,000mm Width: approx.: 8,400mm Hook height: approx.: 3,450mm Room dimensions / external dimensions Length: approx.: 14,100mm Width: approx.: 8,800mm Height: approx.: 5,000mm

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 150 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, fork carriage width: 1,450 mm, empty load weight: 7,000 kg, drive type: Elektro, construction width: 1,550 mm, Electric 4-wheel forklift Ibedpfx Agsvu Ih Hspod Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tires type: Solid rubber Front tires size: 28x12.5-15 Rear tires type: Solid rubber Rear tires size: 23X10-12 Battery voltage: 80V Battery year: 2025 Load backrest, sideshift, fork positioner, - Fork dimensions: 150x55x1150 mm 3rd valve, 4th valve, front work lights, heater, load backrest, full cabin, full free lift, CE certificate, safety light,

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 150 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, empty load weight: 7,000 kg, drive type: Elektro, construction width: 1,550 mm, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tire type: Solid rubber Front tire size: 28x12.5-15 Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire size: 23X10-12 Rear tire condition: 80 - 100% Battery voltage: 80V Battery condition: 80 - 100% Load backrest, sideshift, fork positioner, - Fork length: 1150 mm Ibedpfewqtvasx Agpjd 3rd valve, 4th valve, front work lights, heating, load backrest, full cab, full free lift, CE certificate, safety light,

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Payload / lifting load 250 KG - 0.25to Technical data of the system: Iodpfx Agemqf Nfspjbd Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: excellent (used), Year of construction: 2017, Portable compressor ATLAS COPCO XAVS186 ST4, machine with aftercooler (air dryer) after full service!!! Ibodpfjnzh Rbjx Agpod Technical data: Capacity: 11.50 m³/min; Working pressure: 14 Bar; Year of manufacture: 2017; Engine: JOHN DEERE Operating hours: 1,643 h !!!!!; Compressor fully functional, ready for work, with warranty Machine in perfect condition!!! Below is a link to a video showing the machine in operation.

Condition: used, Year of construction: 2025, DESCRIPTION / DESCRIPCIÓN / DESCRIPTIONHMK 145LC SR-5, 2.3 m stick, 4.6 m boom / 0.70 m3 ? 1200 mm bucket / double-acting hydraulic line, joystick proportional control / hydraulic line support for rotation / hydraulic line for quick coupler / Smartlink GPS+GPRS / air suspension and seat heatingSingle-/double-acting hydraulic lineAuxiliary hydraulic line for rotationHydraulic line for quick couplerSetting the flow rate (liters per minute) on the displaySetting the pressure (bar) on the displayProportional control on the joystickSafety valves for boom and armOverload warning switchRod protectionTravel alarmPneumatic seatSeat heatingRain/sun visorFOPS/sun visorFOPS2 cab protection systemComplete windshield protection cage (stone/rock)2-part boom 4,8 mFront dozer bladeReversing cameraRight side camerasWithout bucket: D.R., 0.6 m3 ? 985 mm ==> 0.75 m3 ? 1210 mm2.6 m arm price differenceBoom cyl. pipe protectionRubber track pads ROAD LINER-500 mmLED working lightAutomatic lubrication system Groeneveld Twin Heavy DutyWarranty 1 year or 2,000 hours, whichever comes first -Certificate 31Upper chassis swing movement. Alarm1 32Leica Ready 2D/3D pre-installation10 33Front dozer blade ready (without blade)1 34500 mm base plates + 4 additional holes for bolting on1INCL. 35600-mm-Bodenplatten1 36700-mm-Bodenplatten1 37Rutbber caterpillar plate for bolting on ? 500 mm ? from Hidromek supplier ex works with bolted-on metal rail with 4 additional holes (not in the chain)1 38Rubber track plate for bolting on ? 500 mm ? from SOLIS. Is screwed to the chain, on the metal plate in the middle1 39Additional hydraulic line ? Leakage line1 40Dual high flow ? Double-acting hydraulic line with high flow.1 41Smartlink1 42Single/double acting hydraulic line1 43Auxiliary hydraulic line for rotary movement1 44Hydraulic line for quick coupler1 45Setting the pressure (bar) on the display1 46Proportional control on the joystick1 Ibsdour D Umepfx Agped (*) NB: The prices in the option is valid only when the option is delivery with the machine. Spare parts price can be different..... ..... Subject to prior sale and errors excepted Images show original consumption data

Condition: excellent (used), Year of construction: 2010, Gantry crane, bridge crane, hall crane, assembly crane, workstation crane, overhead travelling crane, crane system -Equipment: with electric chain hoist ABUS type GM6 1250.6-1, floor operation -Load capacity: 1250 kg -Track width: 8.7 m -Transport dimensions: 9280/850/H250 mm 1740/290/H320 mm -Weight: 1195 kg Ibsdpfew R Sv Dex Agpod

Condition: new, sheet width 1290 mm plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, Ibedpfx Agjvzhgpspod max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 2550 mm Press force: 135 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2100 mm Forward speed: 120 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Ibodpfxegu Nzrs Agped Front support arms: 2 pieces Oil tank capacity: 150 liters Main motor power: 7.5 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 850 mm Table width (G): 110 mm Length (L): 2950 mm Height (H): 2200 mm Width (W): 1500 mm Weight: approx. 6000 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity