Fischer Cantilever Rack

Fischer

Condition: used, Spindle 3.5 - 16 - 10 kVA 2750 - 14660 - 23660 RPM Inspection is possible at my warehouse after prior appointment. Rcedpfxjp I T Rqe Alcjf Collection or shipping are both possible.

Condition: like new (used), Almost new cantilever racks, single- and double-sided, available from stock. Loading marks may be visible on the system. Rjdpexcn Ekjfx Alcocf Available quantity: 20 pcs System dimensions: Arms: base + 5 arms, 80 cm long Load capacity: 160 kg/upright Uprights: 4 pcs, 2500 mm high, 90 cm upright spacing Load capacity: 1000 kg/upright Total system length: 3300 mm Total system depth: 1100 mm Single-sided: 1090 EUR Double-sided: 2000 EUR

Condition: used, Year of construction: 1986, functionality: fully functional, Hydraulic CNC plate shear Fischer DHS 10 / 3000 Rcsdpfxozl Twqe Alcsf Maximum cutting length / sheet width: 3,000 mm Maximum sheet thickness, normal steel: 10 mm Maximum sheet thickness, stainless steel / V2A: approx. 6 mm Control: CNC-controlled back gauge Machine weight: approx. 7.5 to 9.0 tons Installation dimensions L x W x H: approx. 3.80 m x 2.20 m x 2.00 m

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. Rsdpfxoza T Nke Alcscf In good condition.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Rcodpfoyr T Nhsx Alcsf

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Rcsdpfx Ajzuz Hlolcjf Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding. Rodpfszuz Hfex Alcocf

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany Rcedpfxjzwnifo Alcof - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: used, Year of construction: 2007, - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 Veneer shear Manufacturer: Fischer & Rückle / Monguzzi Year of manufacture: 2007 Veneer shear with milling unit and gluing unit for butt joint gluing - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 - Length: 7 m - Width: 3 m - Height: 2 m Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Rjdpfx Ajzuzqqolcecf

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Rjdpfx Alszuzptjcecf Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Redpfoxzrx Ejx Alcecf Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: ready for operation (used), Year of construction: 1994, Web width: Max 1250 Print width: 1230 mm Print repeat Max 760mm , Min 300mm Rcodpowvvwdjfx Alcef Max. mechanical speed: 300 m/min Single unwind Max. unwind diameter: 1250 mm Drying type Boiler Substrate types: Paper, polyethylene (PE), polypropylene (PP), and other flexible packaging materials Ink system: Solvent-based inks/water-based inks

Condition: used, table length 4000 mm table width 3000 mm table height 400 mm Arrival table with linear guide and height indicator Redegrnbgspfx Alcecf dimension Length: 4000mm Width: 3000mm