VERTICAL STAINLESS STEEL TANKS 4000L

Flender Himmel 4000L

Condition: good (used), Multivac thermoformer currently setup to produce ‘hotel style’ jam packs, 14g and 20g. 32 portions per cycle. Could also be used to produce ice cubes, sauce packs, ketchup, stock etc. Can also be supplied as a line with M&P 32 head filler and end of line tray wrapper if required (at extra cost). Podetp N Ddopfx Ah Uorf

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Psdsppyhtepfx Ah Uorf Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Pedpfen Dw Nksx Ah Uorf

Condition: excellent (used), GRUNDFOS PUMP TP80-400/2 Item: D-5490-Grundfos pump USED WATER PUMP, GRUNDFOS Type TP80-400/2, 15,0 kW, Bar/C - 16/120 Q - 114,8 m3/h H - Max 34,7 m O/m- 2940 Nice condition 3 pieces identical Prodpol I R T Nsfx Ah Ujf

Condition: good (used), Used stainless steel agitator vessel with double jacket Item number: 10492 Final use: food Volume: approx. 1400 litres Type: Standing on 4 feet Material (wetted): 1.4301 stainless steel Design: With double jacket Manhole: 1250x420mm Hinged cover on both sides Base: Vaulted Top panel: Hinged lid Operating pressure according to type plate: ATM Tank dimensions: Outside diameter: 1460mm Cylinder height: 870mm total height: 2040mm total width: 1460mm height of the feet: 560mm materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 facilities: Double Jacket Nameplate: yes Outlet: 70mm Prsdjfiguuopfx Ah Ujf Various connections Gratings Agitator

Year of construction: 2015, condition: excellent (used), Syspal Tote Bin Lifter / Tipper Tipping height 1400 Fully stainless steel Mobile on lockable castors Electrohydraulic operation Built-in battery power pack Complete with plug in charger Charge lasts for 1 week, depending on usage Prjdjim Ivvopfx Ah Uof In excellent condition

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Podpfju R Icmjx Ah Uerf Solids discharge: Spiral conveyor Further information: see photos

Condition: used, Year of construction: 2019, Cylindroconical fermentation and storage tanks, standing on four feet, with a maximum operating pressure of 2.5 bar. The tanks are each equipped with frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap and temperature control. Additional title: vertical, coolable, stainless steel pressure tanks with temperature control Gross volume: 2500 l Operating pressure: 2,5 bar Operating temperature: 50 °C Height: 2800 mm Prjdoxf D Iaspfx Ah Ujf Material: stainless steel 1.4301 (AISI 304) Position: standing on 4 feet Base construction: cylindroconical Features: cooling jackets, insulation (50 mm chloride-free PU foam) cleaning line, 2 outlet lines with manual valves, pressure gauge, bung apparatus, hose level indicator, temperature control, sampling tap

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 1 used steam generator ----- Manufacturer: JUMAG Model: DG560 Output: 560 kg/h Max. thermal output: 400 kW Operating overpressure: 13 bar Test pressure: 23 bar Water content approx.: 75 l CE mark: CE 0036 Year of manufacture: 2013 Podpfx Ahew S Edkj Usrf Equipped with Weishaupt combined gas/oil burner WGL40N/1-A Version ZM 125-550 kW, oil consumption 10.5 – 46 kg/h, gas control section, Control cabinet with touch control, mounted on the boiler body. Eco, automatic blowdown.

Year of construction: 2013, condition: ready for operation (used), A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer for printing trays from REA Jet in the outfeed of the machine, has been serviced regularly, including documentation and spare parts. Podpfx Aji Atnxsh Ujrf