Storage lift

Haenel 1300-825

Condition: used, Year of construction: 2021, A vertical Hänel storage lift system is offered. Machine dimensions X/Y/Z: approx. 2810mm/1645mm/6152mm, access height: 890mm. Equipment: 10-fold optoelectronic height measurement of stored goods, integrated protruding goods check at the front and rear, LED lighting above the access point, equipment for emergency operation as well as earthquake-resistant design. Power supply cable: 5 × 2.5mm² / 5 × 4mm², depending on the electrical configuration. Documentation available. An on-site inspection is possible. Ijdpfxez Agf Ao Afhjbb

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Ibjdsyfnqgjpfx Afhob Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 - C-axis

Condition: ready for operation (used), Year of construction: 2007, A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible. Iodpey Ax Tbjfx Afhebb

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, total height: 6,000 mm, total width: 1,750 mm, total length: 2,820 mm, load capacity per storage section: 500 kg, construction width: 1,300 mm, warranty duration: 12 months, – Tabular control panel with item management – Unit comes from a lift system – Side lift shaft cladding reproduced – 2 units available – 1300x825mm tabular panel, 500kg payload each Ibedpfx Afezaqibshsb

Condition: used, Year of construction: 2017, turning diameter 340 mm turning length 1000 mm control Mazatrol SmoothC Ibedpfx Asy E Txdjfhob

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Iedszuy Tdspfx Afhobb Through-hole diameter 76mm

Condition: good (used), KARDEX SHUTTLE Type No.: XP-500-2450X13 Iedezr N H Iepfx Afhjbb Configuration: H/N55/N22D18B/N75D20/20 Permissible total payload: 2 x 33,200 kg 28 compartments Approximate dimensions (W x H in mm): 2,770 x 7,000

Condition: good (used), Year of construction: 2010, CNC Milling / Turningcenter Machine type: Mazak Integrex 200 IV S Control: Mazatrol Matrix Year: 2010 Available after: Dezember 2026 SPECIFICATIONS Max. turning length: 995 mm Turningdiameter: 660 mm Bar capacity: 65 mm Spindle speeds: 35-5.000 rpm Spindle power: 22 kW 3-jaw chuck: Kitagawa BB-208 200 mm mm Subspindle 3-jaw chuck: Kitagawa BB-208 200 mm mm Travel X-Axis: 580 mm Y-Axis: 160 mm Z-Axis: 1.045 mm Ibjdez A A Epepfx Afhsb W-axes: 1.050 mm CNC-Spindle tilting for cutting and turningopertations Tool: Capto C6 Tool capacity: 40 revolution driven tools: 12.000 Equipment Chip conveyor Tool measurement Internal cooling: 15 bar

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, number of chambers: 2, fuel type: gas, year of last overhaul: 2026, Equipment: CE marking, We offer this Termopan TPD-123 baking oven in very good condition, manufactured in 2014. Manufacturing number: 078/14 Model: TPD-123 Control panel contract number: 66203-7 Voltage: 400 V Frequency: 50 Hz Power: 6 kW Phases: 3 Fuel: Gas The oven is a double-chamber oven with two baking chambers and a single Weishaupt burner. The two chambers can be used simultaneously or independently, depending on the requirements, making it suitable for high-capacity production of bakery and pastry products. The offer also includes 3 tray trolleys. The trolley is designed for 60x80 or 60x40 cm trays, with two trays per row. Isdpfozmykgox Afhjbb If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Two well-maintained Kardex Megamat RS 350 machines from 2013 are available for sale. The Kardex Megamat RS 350 is one of the world’s most popular vertical carousel systems. It belongs to the same model series that is still available on the market today. Both machines have been used in a clean environment and have undergone regular maintenance. Each machine features: Carrier width: 3,250 mm Shelf depth: 428 mm Ijdszvqkcjpfx Afhsbb 41 carriers These machines offer high storage capacity while occupying very little floor space. They are ideal for fast picking and compact storage of small to medium-sized items. The machines can be purchased individually or as a set of two. Technical Specifications Model year: 2013 Model: MEG RS 350.1.3250.4.305.41 Machine height: 6,985 mm Machine width: 3,875 mm Machine depth: 1,471 mm Number of carriers: 41 Number of shelves: 0 Maximum carrier height: 270 mm Carrier width: 3,250 mm Carrier depth: 428 mm