High pressure pump unit 490bar 59l/min.

Hammelmann HDP 77

Year of construction: 2007, condition: like new (used), machine/vehicle number: A7.01077.0336, Hammelmann Electric Driven High Pressure Unit 950 bar 38 ltr/min 400V 50Hz Ledpfxsdt Uyuo Aa Ijhg complete unit in new condition without controls and motor starter

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz Lhjdpfx Aaetv H Uce Ieg drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Delivery rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Lhjdorzuwmopfx Aa Iog Condition: In good used condition.

Condition: good (used), Year of construction: 2011, pressure: 330 bar, operating pressure: 330 bar, Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but not Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1,500 rpm Drive power: 37 kW Lhsdpfx Aowyn Susa Isg Equipped with Siemens 1LA6223-4AA60 electric motor, 45 kW With pressure regulating valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of manufacture: 2011 Condition: In good used condition. New oil pump.

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW Lhedotqqllspfx Aa Ijg weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Lhedpfxoqabiae Aa Iog Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), the plant is consisting of: - 2 chain separators Ledelxzl Ejpfx Aa Iehg - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: used, machine/vehicle number: 87 54 41 57, Grinding wheel Ø: 200 mm grinding wheel width: 30 mm grinding wheel bore: 51 mm grinding wheel speed: 3000 rpm electrical connection: 380 V, 630 W space requirement: 600 x 260 x 320 mm Lsdjdc Swuepfx Aa Ijhg Weight approx.: 23 kg

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine Ljdpjirax Usfx Aa Iehg -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, Pillar drilling machines Ledeb N Ezrspfx Aa Ishg