Log trailer

HFR 30 t. 4 axles Timber / Wood / Holz transport

Condition: used, Complete roundwood sorting plant / debarking line / roundwood yard, comprising: - 2-section roundwood infeed (8 chains total) - Log singulator - Infeed conveyor - Log transfer carriage - Bruks butt reducer - Crosscut saw for long logs - Transverse conveyor - Log transfer carriage - Infeed to debarker - Debarking machine CHE Johanson 660 SH Ksdsxb N U Depfx Ah Ujfa - Sprecher Automation roundwood measuring SELSCAN 512 (year 2002) - Sorting line - Roundwood bins: 8 bins on the left, 8 bins on the right (with throw-over bins for long logs) - Control cabinets - Control system - Bark drag conveyor Immediately available – located in Austria near Linz

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW Ksdpfx Ajh Dwl Deh Ujfa feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Equipment: all wheel drive, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Kfedpfxovm N Dts Ah Usa Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Condition: new, machine/vehicle number: wtlserie, Westtech Woodcracker L540 / L700 / L920 / L1200 Westtech L540: Gripper opening: 540 mm Splitting force (depending on operating pressure): up to 14 t Own weight (basic version): 195 kg Recommended liter output: approx. 25 - 60 l/min Recommended operating pressure: 180 - 240 bar Optional: Stand Optional: Excavator attachment Optional: Yard loader attachment Westtech L700: Gripper opening: 700 mm Splitting force (depending on operating pressure): up to 22 t Kfedpfxjiady To Ah Uea Own weight (basic version): 285 kg Recommended liter output: approx. 25 - 60 l/min Recommended operating pressure: 180 - 240 bar Optional: Stand Optional: Excavator attachment Optional: yard loader attachment Westtech L920: Gripper opening: 920 mm Splitting force (depending on operating pressure): up to 22 t Own weight (basic version): 370 kg Recommended liter output: approx. 25 - 60 l/min Recommended operating pressure: 180 - 240 bar Optional: stand Optional: excavator attachment Westtech L1200: Gripper opening: 1,200 mm Splitting force (depending on operating pressure): up to 33 t Own weight (basic version): 1,100 kg Recommended liter output: approx. 80 - 150 l/min Recommended operating pressure: 220 - 270 bar Optional: stand Many adapter plates on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!

Condition: good (used), functionality: fully functional, Used, but fully operational complete line. The video shows the exact machine I am selling. New price starts at 337,605 USD without the upgrades. Please contact me for more details or pictures/videos. Kfedpfxevn Ei Ue Ah Uja

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Kfodpsv Sqrpefx Ah Uja The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Year of construction: 2024, condition: new, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; Ksdpsh I Nw Defx Ah Uofa ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 140mm Number of spindles 7 Arrangement of spindles Bottom 7.5kw Right 7.5kw Left 7.5kw Right 7.5kw Top 7.5kw Bottom 7.5kw Universal 360° 7,5kw Kodpforup Igox Ah Usfa ATS control system Corrugated table Pulling rollers in the work table driven Feed on cardan shafts Feed motor 5.5kw Feed speed 6-36m/min Total power 61kw

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material presses divided into 4 sections Feed speed adjustable by variator 4-24m/min Length of input table 1980mm Drive on cardan shafts Ksdpfstxxwdsx Ah Ujfa Thick soundproof cabin Machine dimensions 380x226x178cmH CE certificate

Condition: new, machine/vehicle number: wtwserie, Westtech Woodcracker W600 W820 W1000 W1350 W1800 splitting tongs - available immediately Westtech Woodcracker W600 - Tongs opening: 620 mm - Splitting force at 240 bar: 26 t - Own weight (basic version): 295 kg - Recommended liter output: 25 - 60 l/min - Recommended operating pressure: 190 - 250 bar - Service weight of carrier vehicle: 6 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W820 - Tongs opening: 820 mm - Splitting force at 240 bar: 26 t - Own weight (basic version): 360 kg - Recommended liter output: 25 - 60 l/min - Recommended operating pressure: 190 - 250 bar - Service weight of carrier vehicle: 10 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1000 - Pliers opening: 1040 mm - Splitting force at 240 bar: 26 t - Own weight (basic version): 580 kg - Recommended liter output: 40 - 80 l/min - Recommended operating pressure: 190 - 250 bar - Service weight of carrier vehicle: 14 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1350 - Pliers opening: 1370 mm - Splitting force at 240 bar: 34 t - Own weight (basic version): 950 kg - Recommended liter output: 80 - 150 l/min - Recommended operating pressure: 220 - 270 bar - Service weight of carrier vehicle: 20 t - Optional: Rotator Westtech Woodcracker W1350 - Pliers opening: 1370 mm - Splitting force at 240 bar: 34 t - Own weight (basic version): 950 kg - Recommended liter output: 80 - 150 l/min Kodjiadyzopfx Ah Uofa - Recommended operating pressure: 220 - 270 bar - Service weight of carrier vehicle: 20 t - Optional: Rotator Westtech Woodcracker W1800 - Pliers opening: 1830 mm - Splitting force at 240 bar: 50 t - Own weight (basic version): 1990 kg - Recommended liter output: 100 - 190 l/min - Recommended operating pressure: 240 - 300 bar - Service weight of carrier vehicle: 20 t - Optional: Rotator various versions and various adapter plates available - price on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!