Truck mounted crane

HIAB 140 AWV

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Toolboxes (external): yellow RAL 1032 Gsdpfx Aspl Avdebuobh Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Specially designed recovery arm with lifting eye for recovery, towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Full hydraulic system.3.Paint HDRV (STANDARD) IMMEDIATELY AVAILABLE STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING EYE: black, U-TEXT RAL 9005 RECOVERY ARM: black, U-TEXT RAL 9005 REAR SUPPORTS: black, U-TEXT RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, U-TEXT RAL 9005, front smooth frame (STANDARD) - hot-dip galvanized - for mounting counterweight at the front - rear part in body color gearm (STANDARD) - lifting angle 40? (Fig. HDRV 1013) - Mounting plates for main and auxiliary cable winch - Shackle 2x15000kg - Left and right side in the rear part of the arm - Space for spare wheel holder on recovery arm.6.Lifting frame (STANDARD) - Range position with respect to horizontal axis -5° / +10° - Load capacity in retracted position 20000kg - Load capacity in extended position 10000 kg - Extension 3800mm - Range up to rear rafter supports (STANDARD) - Independently controlled - Maximum width -3000mm - Rotating supports for work on asphalt and rafter extendable beam No HDRV 1013 Single extension 0 - 3000mm Maximum payload 2000 - Storage of the tank behind the driver's cab - Relocation of the air tank behind Driver's cab - Battery relocation behind the driver's cab - AdBlue tank relocation Gbsdpfx Asiuwl Sebuoh - Counterweight behind the driver's cab on the front frame (weight 100kg) - Main cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg cable winch COME UP Bison 50, mounted on the recovery arm, pulling force 22,5kg hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on the right side (STANDARD) - On the right side, in rear connections for supplying the braking systems, transferred from the chassis - Quick release with 20 meter cable - Air pressure roller, on the left side of the body, above rear axles Electrical plug connection for trailer + trailer coupling, from the chassis Belt aid 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in Driver's cab - Camera above cable winches + LCD screen in control box SCREEN: ? Vibration resistance: 10G ? Impact resistance: 100G ? Working temperature: -30 to + 70 ° C ? CE marking ? EMC approval: activation of emergency stop switch - Radio remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in box opening - Doors - Railings on storage boxes - Stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the driver's cab, for fork, hook, open storage box edges with stainless steel profile in storage box lighting package complies with the road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED light warning bar GAMET DE LUX, 1800mm - Mounting of the light warning bar on the upper part of the body - Warning light ORANGE BLTZ, 2 pieces - front mounting - Warning light ORANGE BLTZ, 2 pieces - mounting on the rear - Warning light ORANGE BLTZ, 2 pieces - mounting on the edge of the last storage box door - switch for all spotlights on

Year of construction: 2025, condition: new, machine/vehicle number: 747924113, Dipperfox SC600 - the new standard for urban greening. The Dipperfox product family is growing with the new addition - the baby Dipperfox, called SC600. As an original, the Dipperfox 850 Pro is the world's most effective stump removal machine for large excavators, for use in construction and forestry. Our SC600 model carries the performance, but can be be adapted for smaller carriers. The DF600 is a tool for people in cities, municipalities, arborists, and gardens - Where full size crawler excavators are too big to use. The main advantages compared to conventional stump grinders are safety, noise level and efficiency. Because Dipperfox's rotation speed is a maximum of 60 RMP, there are no flying debris and if the blade hits the rock, it is simply pushed away. No need to create large Safety zones to get the job done. And as a true member of the Dipperfox family, the SC600 does does the same job, but much faster compared to vertical grinders. It can also be used to work up to half a meter below the ground. It is very useful when you need to plant a new tree in the same same place where the original stump was located. Dipperfox SC600 is a multi-carrier tool suitable for the following: * Backhoes between 6 and 14t * Backhoe loaders from 6t * Skid steer loaders and compact track loaders from 6t * Hydraulic pressure 170-280 bar and 65-150 l/min Gbsdpslqak Dofx Abush Further information Equipment: shears, Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: new, functionality: fully functional, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, onboard computer, parking heater, retarder, Iveco Stralis S-Way 500 6x2 ADR Model Year 2024 Brand new, factory condition To be registered Ready for immediate delivery - Retarder: Intarder - 0 km - Full air suspension - Wheelbase: 4,200 mm - ADR: all classes - Stationary air conditioning - Double bunk - Navigation system - Alcoa alloy wheels - Third axle liftable and steerable FINANCING OR CUSTOMIZED LEASING SOLUTIONS AVAILABLE ONSITE. OPTIONS FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) HEADQUARTERS - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS Gsdpfx Aewgy Hdsbuobh CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 8:30/14:00 WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730 -Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-Trailer – Refrigerated Semi-Trailer – Lamberet - Schmitz - Isuzu - Fixed body – Crane – Tipper – 4 axles - 4 Rear Axles – Tway – T-Way-540 - 460 HP – Xway - X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtain-sider – Box – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines all responsibility for any discrepancies concerning technical equipment, optional features, and specifications that may, in some cases, differ from those stated in the description. We invite you to verify the characteristics of the specific vehicle.

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Godpsra N A Nofx Abuebh Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, General information Field of application: Construction Serial number: Drivetrain Drive: Wheel Gbjdpfxjvl Dl Ao Abueh Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, machine/vehicle number: 421159679, Mobile jaw crusher on crawler track VULCANO crusher is the most modern and compact machine of the last generation in the 25 tons category. The feed hopper with roadworthy loading dimensions and the possibility of folding the conveyor belt, which allows transport also on trailers, make it versatile in transports and equally fast in start-up. From the arrival at the site to the moment of the start of the crushing operations, only the time necessary for warming up elapses. Equipped with the latest generation of control and operating systems, it is simple and user-friendly, and also environmentally friendly. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guaranteeing it the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to stresses. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. The GI CRUSHER VULCANO certainly offers convincing and incomparable performances both in operations on natural stone and in recycling, as well as for rentals. Production capacity: approx. 190 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 2750 mm Gbjdohd I Sbspfx Abueh dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 830 x 580 mm crushing gap from 30 to 160 mm feed hopper 3,5 m³ - 1800 x 2970 mm grizzly feeder 770 x 2750 mm Main conveyor belt 800 x 8700 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel chain drive 400 x 2920 mm Weight: kg Transport length 10850 mm or 9170 mm with folding discharge belt Transport width:2520 mm transport height 3100 mm Further information Purpose: construction, Drive: caterpillar

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system Gbodpfxjxrtt Eo Abush 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Gbedpfxexdc Ehs Abuoh

Condition: used, Year of construction: 2010, Loading crane HIAB 1 EP-4 Year of manufacture 2010 4x hydraulically extendable 5th and 6th function Remote control Gbodpfx Aswx Eu Rebueh Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium