5 KW chiller, cooler IKG

Hitema ENR 005

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) Tedpeg Ezarofx Am Tja -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2019, Complete system for sale: 1 York chiller and one Jäggi cooling unit. Tjdpfx Aev Npgmem Tja

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tedpjvzmtzsfx Am Tsa Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: new, Year of construction: 2026, Spindle speed, stepless electronic control: 40-4000 rpm Spindle mount: MK 2 Table height adjustment with rack and pinion Tsdjby Swhspfx Am Tea Thread cutting capacity, max: M10 Adjustment of thread cutting depth via digital depth gauge Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment with rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Overhang: 225 mm Column diameter: 60 mm Usable table area (W x L): 330x250 mm Machine dimensions (W x D x H): 420x450x860 mm Machine dimensions (with base): (W x D x H): 452x700x1130 mm Weight: 62 kg Max. distance spindle/table/base: 300/360 mm Motor: AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling kit no. 2 - Felix vise, jaw width 80, clamping range max. 120 mm - Quick-change drill chuck 1-13 mm, mount B16 - Taper shank MK II/B16 - Reducing sleeve MK II/MK I Price: € 320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 Tsdpfx Amjymznhs Tja >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: new, weight max. in kg 1200 kg fork length 1150 mm stroke height min 85, max 190 mm 160 mm length in width 550 mm number of wheels 4 vorne, 2hinten tire equipment 80 x 70mm PU tandem fork arm (length x width x thickness) 1150 x 160 x 45 mm turning radius 1452 mm battery 48V / 20Ah weight of the machine ca. 0,140 t dimensions 1,65 x 0,55 x 1,2 m SPECIAL PRICE!!! - Battery charging time only 3 hours - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight Tjdpfx Amefgyhno Toa - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm Tsdodmbrxjpfx Am Tea spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Todpfxsvt A Rtj Am Tsa Turret head B-axis with 1° division Belt filter system included

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Tjdpfx Aergw Exjm Tja Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: new, Pasteurizer with tube heat exchanger Tsdeb Nt T Tepfx Am Toa Nominal capacity 2,000 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 180 kW Electrical rating 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,715 mm Width 900 mm Height 1,900 mm Weight (heating circuit drained) 500 kg Weight (heating circuit filled) 600 kg Heating oil consumption approx. 19 litres/h Max. exhaust temperature: 180°C Noise level (LW, A) 83 dB