Fork Lift Truck - Diesel

IRION DFG 8/3314

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Pgedpev N Uuvofx Am Tsp Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg

Condition: new, functionality: fully functional, mileage: 1 km, power: 5 kW (6.80 HP), color: grey, overall weight: 2,150 kg, operation weight: 2,150 kg, lifting power: 1,000 kg/m, lifting height: 3,120 mm, tire size: 29*12.5-15, emission class: none, digging bucket width: 1,200 mm, Year of construction: 2025, operating hours: 1 h, Equipment: air conditioning, all wheel drive, cabin, hydraulics, low noise, pallet forks, standard shovel, trailer coupling, Motor: YQP5.72AF.48P Engine power: 5000 watts Pjdpfx Asvcl T Nem Tjgp Battery: 72v 200Ah Standard tire size: 29*12.5-15 Drive: 4-matic Additional Functions: 1 Lifting capacity: 1000 kg Net weight: 2150 kg Speed: 12 Km/h Hydraulic flow: 27 L/min Working pressure: 160 bar

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Pgjdpfx Ajb Nulhom Tep Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Psdsyw Tddjpfx Am Togp Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use Pgsdpfx Amew I R Rns Tsp - Customised production

Condition: used, mileage: 552,546 km, power: 353 kW (479.95 HP), first registration: 04/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, wheelbase: 5,550 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,200 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Differential lock - Remote central locking - Lift axle - Towing jaw (Maulkupplung) - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Auxiliary heater Psdpjw Dr H Rsfx Am Tjgp - Toolbox = Remarks = HMF 8520 OK6 Scanreco radio remote control. 4 x hydraulic outriggers. 6 x hydraulic extensions. Winch: 2,500 kg. 4.48 m – 16,030 kg 6.33 m – 11,100 kg 8.23 m – 8,310 kg 10.23 m – 6,520 kg 12.33 m – 5,300 kg 14.51 m – 4,440 kg 16.75 m – 3,820 kg Adjustable fifth wheel. Stainless steel toolboxes. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Front axle 2: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Rear axle: Tyre size: 315/70R22.5; Twin tires; Tyre tread left inner: 20%; Tyre tread left outer: 20%; Tyre tread right inner: 20%; Tyre tread right outer: 20% Front axle 3: Tyre size: 385/55R22.5; Steering; Tyre tread left: 60%; Tyre tread right: 60% Weights Kerb weight: 25,390 kg Payload: 11,110 kg Gross vehicle weight: 36,500 kg Functional Crane: HMF Financial Information Price: On request Identification Model number: TGX 37.480 8x2-6 / HMF 85 t/m CR = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Condition: good (used), Technical condition: good Visual appearance: good Pedpfxet Dlurj Am Tjgp Please contact Ferdinand Pater for more information

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Podpfx Amsyf Rrts Togp Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 1990, Equipment: all wheel drive, * O&K crawler excavator * Year of manufacture 1990 * Window defect Psdpfx Amowpptls Togp * Needs repair * Work lights * Bucket ----Internal vehicle number: 10119-----Subject to errors and prior sale

Condition: good (used), Sanding machine for straight edges; for sanding and fine polishing straight edges, miters and phases Data: - Glass thickness 3-25 mm - Min. dimensions: 80 x 120 mm - Max. Dimensions: 3 x 3 meters - Mitres 0-60° - Power: 15kW - Dimensions: Length 6.5 meters - Width with water tray 1.6 meters Pgsdpfx Amou U H H Ae Top - Height 2.5 m meter - Feed speed: 0.4 - 4.2 m/min. - Weight: 2600 kg Price on request