Heavy Forklift - electric

JMG MC 250.09 FL

Condition: used, machine/vehicle number: 1077, Year of construction: 2023, operating hours: 81 h, lifting height: 8,000 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 25.000 kg Maximum passing height: 286 cm Front tyres / undercarriage remaining: 95 Kledpfxowfcdio Agnot Rear tyres remaining : 95 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 4.12x1.8x2.85 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2014, operating hours: 14,950 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Exclusive use in plastics processing – no heavy-duty machining, no steel, stainless steel, or titanium processing; resulting in reduced wear on the spindle, guides, ball screws, and rotary axes. Technical data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: Kljdpfey Smm Uox Agnst - Speed range: 20 – 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Loading capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool holder: HSK-A63 Chip conveyor: not shown, but available. Operating hours: approx. 50,320 h Spindle hours: approx. 14,950 h

Condition: new, Year of construction: 2026, load capacity: 25,000 kg, lifting height: 2,470 mm, total length: 6,520 mm, - Ladegerät Hersteller: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - hintere Hintergruppe mit zwei unabhängig voneinander drehenden Gruppen Ksdpfxjy Eh N Ro Agnolt - Vorderachsenantrieb mit gegenläufiger Bewegung - großer Freihubmast - Abnehmbare Kontergewichte - Ausfahrbare Hintergruppe: 7720 mm - Max Tragfähigkeit Gabel mit offener Hintergruppe: 25t@0.9m - Max Tragfähigkeit Gabel mit geschlossener Hintergruppe: 16.5t@0.9m - Antrieb: Vorderachser Antrieb mit gegenläufiger Bewegung N°2 Elektromotoren AC 12 kW 96V - Gesamtgewicht mit Gabeln Kg. 25.000 - Gesamtgewicht mit Ausleger Kg. 25.000 - Gabelhalterung und Gabelzahn: 3.000 kg - Gewicht vom Kranmast: 3.000 kg - Gewicht von den abnehmbaren Kontergewichten : 6.000 - Batterie: 96 V - 1050 Ah - Betriebsbremse: hydraulisch mit Fußsteuerung - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Lenkung: über die Hinterachse - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Auslegerwinkel vom Mast+12°/-7° - Motor: N° 1 Elektropumpe AC 35kW 96V

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Kledpsv S U Izofx Agnst Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical data Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm Bed width: 205 mm Infinitely variable speed: 30 - 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: Taper DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Dimensions (LxWxH): approx. 1600 mm x 950 mm x 1700 mm Equipment / Accessories Siemens SICOMP IMC 05 Kljdsyuy D Repfx Agnet 3-jaw chuck 4-jaw chuck Quick-change tool post system Multifix with 6 holders Bed stop Drill chuck with taper arbor Collet chuck Large collet set Fixed and travelling steady rest Coolant system Emergency stop switch Machine light Change gear set Operating tools

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control. Klsdpfsvphv Tsx Agnjt Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Pictures/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine energized): 26,492 h The actual operating hours are significantly lower. Based on experience, spindle run time (actual turning) accounts for approx. 30% to 50% of this (i.e. approx. 8,000 to 13,000 hours). Technical specifications: Working area: Center height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Center distance: 750 mm Lathe spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed motors Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Ksdpfoxrg S Iox Agnolt Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Kedpfxetwliwj Agnelt Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, Year of construction: 2016, machine/vehicle number: 127300000073, total height: 4,500 mm, total length: 9,000 mm, total width: 6,500 mm, overall weight: 46,000 kg, 5-axis CNC universal machining center with controlled B-axis and NC rotary table (C-axis). Large working area approx. 2,100 x 2,100 x 1,250 mmEquipped with powerful SK50 spindle (52 kW, 430 Nm, up to 12,000 rpm) and through-spindle coolant up to 80 bar. Tool changer with 60/63 positions (chain/wheel magazine, double gripper).Well equipped with Blum laser, 3D quickSET, ACC and MPC. Including chip conveyor, oil mist separator and coolant system.Control ON: 47,888 h - Operating hours: 21,228 h Travel X-axis: 2100 - mm NC rotary table: Yes Dimensions (LxWxH) approx.: 9000 x 6500 x 4500 mm Weight approx.: 46,000 kg Serial number: 12730000073 Travel Y-axis: 2100 - mm 5-axis machining: Yes Travel Z-axis: 1250 - mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes Ksdoyxmicspfx Agnelt

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Kedpfx Agov Tk Exjnjlt Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l