Jungheinrich ETV 216

Jungheinrich ETV 216

Condition: used, functionality: fully functional, machine/vehicle number: 911xxxxx, Year of construction: 2017, operating hours: 7,238 h, load capacity: 1,600 kg, lifting height: 9,020 mm, free lift: 2,896 mm, fuel type: electric, mast type: triplex, construction height: 3,540 mm, fork length: 1,150 mm, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach truck Chassis number: 911xxxxx Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Kjdpfxozwykhs Achjnb Front tire size: Load rollers, polyurethane Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 48V Battery Ah: 775Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2019 Description: Serviced, technically and visually refurbished, inspected according to UVV regulations, without warranty/liability for material defects Side shifter, integrated 3rd valve, roof protection, impulse control, full free lift, CE certificate, Efficiency package, panoramic mirror, PIN code, floor spot LED, solo pilot, all wheels will be replaced before delivery, battery (03/2019) with Aquamatik, external charger included

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Knsdpfxjt Uzits Achjb ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: used, functionality: fully functional, machine/vehicle number: 823xxxxx, Year of construction: 2000, operating hours: 6,952 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,556 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 800 mm, empty load weight: 3,368 kg, total length: 1,802 mm, drive type: Elektro, construction width: 1,238 mm, Reach Truck Chassis number: 823xxxxx Load center: 600 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Impulse Condition: Operational and fully functional Technical condition: Standard Front tire type: Polyurethane Front tire size: Load wheels, polyurethane Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 48V Battery capacity: 560Ah Battery manufacturer: VHB/Jungheinrich Battery type: PzS Battery year: 2000 Knodpswhtchofx Achsb Description: The machine is operational but is sold as returned from the customer, with no warranty or guarantee, NOT refurbished and NOT UVV (safety inspection) approved, WITHOUT charger, sale only to dealers! Side shift, 3rd valve, impulse control, full free lift, 800 mm forks, joystick, electric steering, fabric seat (seat cushion glued), battery with Aquamatik system (built in 2000, condition poor), WITHOUT charger! The machine is operational but is sold as returned from the customer, with no warranty or guarantee, NOT refurbished and currently NOT UVV-approved.

Condition: used, functionality: fully functional, machine/vehicle number: 91108269, Year of construction: 2018, operating hours: 13,288 h, load capacity: 1,400 kg, lifting height: 6,950 mm, free lift: 2,400 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Chassis number: 91108269 Load center: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 4Ah Knedpfxszr A Apj Achjb Battery type: PzS Description: Maintenance performed + safety inspection up to date Fork extension, side shifter, fork positioner Fork extension up to 1900 mm

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK 2T gantry crane is a robust and reliable industrial machine designed for intensive operation in production halls, workshops, warehouses, and other industrial facilities. With a load capacity of up to 2000 kg, a durable construction, and a mobile frame equipped with swivel castors, it enables safe and precise lifting and transport of heavy structural elements, machinery, and materials. Main Features and Advantages 2-ton load capacity – ideal for lifting heavy loads in industrial applications. Adjustable working height from 2400 to 3600 mm – allows adaptation to different types of facilities and projects. Double T-type supporting beam (100 x 180 mm) – increased stability and the possibility of installing chain or wire rope hoists. Mobility – four swivel castors with parking brakes ensure easy movement and secure positioning at the workplace. Kodpfx Aeridh Nechsnb High torsional resistance – reinforced steel construction with additional supports ensures rigidity under load. Safe height adjustment – carried out using a lever and two locking screws on each support. Professional Industrial Construction The CORMAK 2T model was designed with efficiency, durability, and safety in mind. The construction based on a double T-type load beam allows the installation of various lifting accessories, including chain hoists and electric winches. Durable travelling wheels ensure quiet and smooth operation even under maximum load, while parking brakes guarantee stability during loading, assembly, and maintenance operations. The gantry crane can be quickly moved along the designated working area or relocated to another part of the facility. Thanks to its high mobility and structural rigidity, it is suitable for many industries, including heavy industry, construction, repair workshops, and logistics centres. Versatility and Upgrade Options The crane can be equipped with additional accessories such as pulley blocks, chain hoists, or wire rope hoists, allowing more precise and controlled handling of loads. It is ideal for tasks such as: Loading and unloading machinery and industrial components Assembly of steel and structural elements Moving heavy parts in repair workshops Service, maintenance, and assembly work in construction applications Standard Equipment Steel frame with adjustable height Double T-type supporting beam: 100 x 180 mm 4 swivel travelling castors with brakes Robust supports with safety locking system Reinforced torsion-resistant construction A Professional Solution for Your Facility The CORMAK 2T gantry crane guarantees reliability and safety when working with heavy loads. It is an investment that improves efficiency and precision in applications where standard lifting solutions are insufficient. The possibility of adding lifting accessories allows the machine to be easily adapted to specific production, maintenance, or assembly requirements. Note: The gantry crane is sold without a hoist – photos are for illustration purposes only. Technical Specifications Parameter Value Load capacity 2000 kg Double T-type supporting beam 100 x 180 mm Height adjustment range 2400–3600 mm Overall width 2360 mm Weight 168 kg

Condition: used, functionality: fully functional, machine/vehicle number: 91155615, Year of construction: 2021, operating hours: 10,708 h, load capacity: 1,600 kg, lifting height: 6,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,150 mm, empty load weight: 3,394 kg, drive type: Elektro, Reach truck Chassis number: 91155615 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Polyurethane Front tire condition: 40 - 60% Rear tire type: Polyurethane Knodpfxszq Ibbj Acheb Rear tire condition: 40 - 60% Battery voltage: 51V Battery capacity: 390Ah Battery type: Lithium-ion Battery year of manufacture: 2021 Side shifter, 3rd valve, front work light

Condition: used, machine/vehicle number: 16765, Year of construction: 2019, operating hours: 7,179 h, load capacity: 1,600 kg, lifting height: 9,020 mm, free lift: 2,896 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,540 mm, battery voltage: 48 V, fork length: 1,150 mm, front tire size: , rear tire size: , overall weight: 3,530 kg, 5066235 Serial Number: 91137034 Battery Details: 48V Li-Lion Kjdpfxjygn Uhj Achonb

Condition: new, Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Ksdpfx Acom Dr Rgohenb Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Condition: used, machine/vehicle number: 16226, Year of construction: 2017, operating hours: 15,208 h, load capacity: 1,600 kg, lifting height: 9,920 mm, free lift: 3,200 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,900 mm, battery voltage: 48 V, fork length: 1,150 mm, overall weight: 4,645 kg, 4997089 Serial Number: 91117138 Kjdpjw R Abkofx Achsnb Battery Details: 48 Volt

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91149148, Year of construction: 2020, operating hours: 8,494 h, load capacity: 1,600 kg, lifting height: 7,400 mm, free lift: 2,356 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, power: 6 kW (8.16 HP), gearing type: hydrostat, battery manufacturer: Jungheinrich, battery model: 48V 5 PzS 775, battery capacity: 775 Ah, battery voltage: 48 V, battery weight: 1,119 kg, DGUV certified until: 02/2027, fork length: 1,150 mm, tire condition: 80 %, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), overall weight: 3,906 kg, empty load weight: 2,787 kg, total height: 3,000 mm, color: yellow, Equipment: CE marking, UVV, adjustable boom, fork extension, full service history, lighting, pallet forks, retractable fork, seat heater, sideshift, Price: €9,500 net / per unit €11,305 gross / per unit 4 units available with similar operating hours, identical batteries & condition. SKUs: 754,755,756,757 Basic Information: Knjdpfx Acjy N D R Eehjb - Manufacturer: Jungheinrich - Model: ETV 216 L GNEDZ - Year of manufacture: 2020 - Key hours: 8,494 h Technical Data: - Drive: Electric - Transmission: Electric - Pedals: Single pedal control - Controls: Solopilot - Steering: 360° steering - Battery: 48V 5 PzS 775 Ah (KW37/2020) - Charger: Included Mast / Dimensions: - Overall height: 3,000 mm - Lift height: 7,400 mm - Free lift: 2,356 mm - Mast type: Triplex mast - Fork length: 1,150 mm - 1,900 mm (hydraulic reach forks) - Rated capacity: 1,600 kg - Load centre: 600 mm Tyres: - Type: Vulkolan, as new Hydraulic equipment: - Sideshift: Yes - Fork positioner: Yes - Reach forks: Yes - Pallet stabilizer: Yes (Opening range 155 mm - 520 mm) [Griptech with installation declaration] - Rotator: No - Additional hydraulics: 3rd & 4th valve + solenoid valve (all occupied) Features: - Structure: Load protection cage - Lighting: None - Lift height indicator: Yes (from 2,500 mm) - Safety equipment: Spotlight (front & rear), DZH beacon, safety belt - Heating: Seat heating Extras: - New FEM/UVV safety inspection on request - Immediately ready for operation - Viewing & test drive possible onsite by appointment. Transport: Affordable delivery available on request. Invoice with VAT: A VAT invoice is always provided. Battery: For battery-powered devices, we are happy to provide an offer including a new battery upon request. Contact: If you have any questions or are interested, please contact us by phone, e-mail or contact form. Subject to prior sale.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance Knodpsx Dmdhjfx Acheb • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: used, functionality: fully functional, machine/vehicle number: 910086046, Year of construction: 2013, operating hours: 15,235 h, load capacity: 1,600 kg, lifting height: 8,300 mm, free lift: 2,800 mm, fuel type: electric, mast type: triplex, construction height: 3,300 mm, fork length: 1,800 mm, drive type: Elektro, Reach truck Chassis number: 910086046 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery type: Thin lead-carbon plate Knjdpfx Acox H U E Uoheb Battery year of manufacture: 2018 Description: Jungheinrich ETV 216, year of manufacture: 2018, operating hours: 15,235. The device is in good optical and technical condition. Charger available upon request. Fast and straightforward transport possible by arrangement! This advertisement serves only to identify the device! A detailed description of the condition and possible equipment will be provided individually upon request! Errors and prior sale excepted, sale only to commercial businesses. Every sale of used goods is made with the exclusion of warranty and/or guarantee. If you haven't found the forklift you're looking for, please contact us. We still have a large selection of other devices in stock. Side shifter.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 10,213 h, load capacity: 1,600 kg, lifting height: 6,200 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork length: 1,150 mm, empty load weight: 3,295 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach truck Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Battery volts: 48V Battery Ah: 620Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Inspection and new UVV Sideshift, 3rd valve, full free lift, safety light, joystick, single pedal, Knodpfozhydcex Achsb 1-pedal control, joystick (multi-pilot), comfort seat, electric steering, multi-color display, beacon, FloorSpot rear and front

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable Kjdpfx Acsdzwwnshonb -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,227 h, load capacity: 1,600 kg, lifting height: 6,200 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 3,300 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach Truck Load Center: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Battery Voltage: 48V Battery Ah: 620Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year of Manufacture: 2019 Knsdpfxszhycxe Achsb Battery Condition: 60 - 80% Description: New inspection and accident prevention regulations Sideshift, 3rd valve, full free lift, safety light, joystick, single pedal, seat, single-pedal operation, FloorSpot rear and front, flashing light, multi-color display, joystick (multi-pilot), ISM module, battery can be regenerated upon request (for an additional charge).