Fork Lift Truck - Diesel

KALMAR DB 7-600

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 320101707, Year of construction: 1984, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, gearing type: hydrostat, battery voltage: 12 V, tire condition: 80 %, empty load weight: 9,100 kg, Equipment: cabin, fork extension, hydraulically sliding cabin, lighting, pallet forks, sideshift, The forklift is old but low used and ready for work. Pedewk Uggepfx Ah Uoha

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, In good technical condition. Year of modernization: 2005. Main electric motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including control cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Assembled floor space: 50 square meters Required installation height: 5800 mm Maximum workpiece weight: 12000 kg Work spindle diameter: 130 mm Phjdjwc Sm Iepfx Ah Usa Spindle taper: ISO 50 Work spindle throat: 800 mm Work spindle speed range: 5 to 1800 rpm Distance of spindle axis from table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 Phodsu I E Emjpfx Ah Uja daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) Pedpfxoc I T Txo Ah Ujha -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm plate thickness:1,2 mm Phodpfx Ahjcxxq Ee Uja total power requirement:2,5 kW weight of the machine ca.:2,0 t dimensions of the machine ca.:3,0 x 1,6 x 1,7 m

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. Phedpfx Asgvkk Neh Uja - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 Psdpfx Aogabu Ujh Ueha with counterholder and base plate.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by Phjdpfx Ahofg E Hpj Uea the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: like new (used), Year of construction: 2024, 20 foot DV storage container / sea container / material container one way, RAL 7035, year 2024 The advantage of storage containers is their versatility in terms of installation. Storage containers can be used stationary for a longer period of time or as a short interim solution with subsequent onward transportation. Due to their design, storage containers also offer the possibility of being moved quickly if required. Storage containers therefore offer excellent options for flexible storage. Psdpsrywnpjfx Ah Uoha DELIVERY CONDITION: completely ready for use and functional, wind and waterproof Wind and waterproof, cleaned CSC certificate (certified safety standard) new paintwork and conversion options on request OPTIONAL CONVERSION OPTIONS: Shortening the container to the desired length Painting in RAL color of your choice Special conversions on request TRANSPORT: Shipping of containers to any region Delivery with regular truck chassis or crane vehicles BASE CONSTRUCTION: Sturdy steel frame construction, roof, side and end walls made of fully welded trapezoidal sheet metal, large double container door with locks, wooden floor. DIMENSIONS: External dimensions in mm: 6,058 x 2,438 x 2,591 (L x W x H) Internal dimensions in mm: 5,898 x 2,350 x 2,389 (L x W x H) We look forward to hearing from you! BIMICON Container Service Your specialist from Hamburg

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% Phjdpjrxxbtefx Ah Usa serial number GEF 2240 height of stroke 3300 mm weight of the machine ca. 9650 t