Full-container reach stacker

Kalmar DRG450-60C5

Condition: used, functionality: fully functional, machine/vehicle number: B11402326, Year of construction: 2024, operating hours: 16 h, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 265 kW (360.30 HP), empty load weight: 83,040 kg, drive type: Diesel, Full-container Reachstacker Chassis number: B11402326 Transmission: Dana TE30510 Condition: Ready for operation and fully functional Technical condition: New Front tyre type: Pneumatic Rear tyre type: Pneumatic Bwedew Ai A Tjpfx Ah Heh Description:

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Control: Professional 5 (FANUC) X travel (mm): 550 Y travel (mm): 1,000 Z travel (mm): 500 B axis (mm): 150 C axis (degrees): 360,000 Number of pallets: - Table dimensions (mm): ø500 Table load capacity (kg): 350 Bwedpfx Ahexmgcpe Hoh Cutting feedrate X, Y, Z (mm/min): 32,000, 40,000, 40,000 Rapid traverse max. X, Y, Z (m/min): 48, 50, 50 Spindle speed (rpm): 14,000 Spindle power (kW): 18.5 / 15 Taper type: HSK63 Torque (Nm): Magazine type: Chain Magazine capacity (positions): 317 Max. tool diameter (mm): 90 Max. tool diameter with adjacent slots empty (mm): 140 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): - Through spindle coolant (bar): yes Equipment: Rotary table with digital measuring system Work light Through spindle coolant Electronic handwheel Dimensions: Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: used, functionality: fully functional, machine/vehicle number: B11400, Year of construction: 2017, operating hours: 16,000 h, load capacity: 45,000 kg, lifting height: 15,200 mm, fuel type: diesel, mast type: telescopic, construction height: 4,700 mm, power: 265 kW (360.30 HP), empty load weight: 73,500 kg, total length: 11,200 mm, drive type: Diesel, construction width: 4,150 mm, Full Container Reach Stacker VIN: B11400 Mast Type: Telescopic Transmission: ZF5WG261 Condition: Ready for use and fully functional Technical Condition: Good Front Tire Type: Pneumatic Bwodpsuh A D Dofx Ah Hoh Front Tire Size: 18.00-25 Front Tire Condition: 40-60% Rear Tire Type: Pneumatic Rear Tire Size: 18.00-25 Rear Tire Condition: 40-60% Description: Sideshift, Heating, Full Cabin, Air Conditioning, Piggy Back, Movable Cabin, Central Lubrication, Pile Slope, Camera, Tamtron Scale

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Bwodewc Amxopfx Ah Heh Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400-2800 Bar loader available!

Condition: used, 5tSWF Krantechnik GmbH Bwsdpedc A R Tjfx Ah Hoh

Condition: good (used), Year of construction: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Type: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC contouring control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G Power-on time: 41,378 h Program runtime: 24,814 h Bwodpfx Ahowcxlws Heh Technical data and equipment available upon request

Condition: used, Year of construction: 1987, Used Paper Bag Making Machine Manufacturer: Newlong Model: RBF – 35S Serial number: 147 35 87 Year of origin: 1987 Country of origin: Japan Bag width: max 350 mm, min 220 mm Bodpfx Aew Nwwqoh Howh Bottom width: max 180 mm, min 60 mm Tube length: max 520 mm, min 250 mm Speed: approx. 100 pcs/min Feeder (roll size) width: approx. 1080 mm

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. Bedpfx Ajw Aw Taeh Hjwh AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: used, Year of construction: 1981, machine/vehicle number: 5171754, Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Bjdpfxoh Ax T Ts Ah Hswh Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. Bwsdpfx Ahotyy Sfe Hoh In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.