Warehouse lift

Kardex Shuttle XP 500

Condition: excellent (used), Year of construction: 2006, 3x Lift System, Kardex XP 500, approx. 3m high, 450kg per tray, Tray size: approx. 3m x 86cm – used – : Price per unit ex-works: €16,500 (net), dismantled, packaged, and loaded, plus transport and reassembly! Price when purchasing all 3 units: €14,500 (net) per unit, dismantled, packaged, and loaded, plus transport and reassembly! Kfodsxv Uc Aspfx Ah Uja Manufacturer: Kardex Model: Shuttle XP-500-3050-864 Serial number: 06000136/001 - 003 Year of manufacture: 2006 Permissible total load: 2x 34,200 kg Load capacity per tray: 450kg Number of trays: approx. 11 pieces per unit Tray dimensions: 3050 x 864mm Machine dimensions: Width: approx. 3.38m Depth: approx. 3.12m Height: approx. 3m 3/N/PE 400V, 11.0A, 6.5 kVA Condition: good – very good Available: from approx. end of November / beginning of December 2025 Location: Frankfurt am Main area Currently, the three units are installed side by side – when placing the units individually, side panels are missing. The buyer would need to supply suitable panels (simple sheet metal is sufficient for covering).

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each Ksdpfx Asd Spf Reh Uofa In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: XP500-1850x864, total height: 7,800 mm, total width: 2,180 mm, total length: 3,074 mm, load capacity per storage section: 520 kg, construction height: 7,800 mm, construction width: 2,180 mm, type of input current: three-phase, input voltage: 230 V, table height: 800 mm, warranty duration: 6 months, input frequency: 50 Hz, DGUV certified until: 12/2025, Equipment: documentation/manual, safety light barrier, Offered here are 4 identical Kardex Shuttle XP500 machines, year of manufacture 2010. Kfsdpfxexuwazs Ah Uja The machines have been serviced and inspected annually by the manufacturer, and repaired as needed. The machines are in very good condition and will be dismantled by professionals, reassembled, inspected, and commissioned at your desired location. We are happy to answer any further questions. Each unit comes with 40 trays; additional trays can be supplied if required.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Kfjdexq Tbtjpfx Ah Uja Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: new, The fine blasting unit type FB 1 has been specially designed for mobile use. Based on the proven "sandmaster" fine blasting system, in combination with the pneumatic control, the unit can be used extremely flexibly. Furthermore, the FB 1 fine blasting unit can be ideally combined with other blasting booths of the injector series by means of the optionally available console. As an exclusive distribution of sandmaster in the area of Baden-Württemberg we offer as IS Zubehör GmbH from our showroom the fine blasting unit type FINE-BLASTER FB 1. - sandmaster" fine blasting system Kfedpfodrfqtjx Ah Uea - abrasive grain size Mesh 46 - 180 - Nozzle diameter 0.8 - 2.7 mm - Completely pneumatically controlled - Dimensions 210 x 350 x 310 mm (W x D x H) The unit can be viewed in our showroom in Stuttgart by prior appointment and would be available immediately.

Condition: excellent (used), Year of construction: 2014, We offer three high-quality Vertical Lift Modules (VLMs) from Kardex, all in excellent condition! The machines are model Shuttle XP 500 2450x864, and they have been regularly serviced by the manufacturer. These units are an excellent choice for companies looking to optimize storage space and boost operational efficiency at a competitive price. Two of the VLMs have a height of 6,950 mm. One VLM is slightly shorter, at 6,500 mm. Each machine comes equipped with 40 trays. Tray load capacity: - 10 trays support up to 360 kg each. - 30 trays support up to 230 kg each. The Shuttle XP 500 is the world’s best-selling Vertical Lift Module, renowned for its performance and reliability. These particular models are especially popular due to their height, making them suitable for most warehouses and manufacturing facilities. Technical Information: - Manufacturer: Kardex Remstar - Model: Shuttle XP 500 2450x864 - Height: 1 unit at 6,500 mm / 2 units at 6,950 mm - Width (VLM / tray): 2,780 mm / 2,450 mm - Depth (VLM / tray): 3,074 mm / 864 mm Kjdpoxftyfjfx Ah Uofa - Number of trays: 40 per unit - Maximum tray load: 10 trays at 360 kg / 30 trays at 230 kg - Power supply: 3/N/PE 400V, 17A

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 🚨 FOR SALE: 2x Kardex XP500 Machines – Top Condition! 🚨 For sale for removal. We are building a new warehouse and do not require these units. In good condition, recently serviced, well maintained throughout the time we have owned them. Price is per unit, negotiable. Shelves can be easily reconfigured to accommodate different product types / sizes. Bins can be sold with machines if desired. Machines are currently configured for dual tray presentation. Also includes 10-bay Kardex SortBench. Ksdjvuvbzepfx Ah Uefa Details: Model: Kardex XP500 Quantity Available: 2 units Condition: Well-maintained and fully operational Key Features: High-density storage to maximize space utilization Fast and reliable picking system for enhanced productivity Built for heavy-duty industrial applications Ergonomic design to improve workplace safety Energy-efficient operation Why Kardex XP500? These machines are perfect for businesses looking to improve efficiency, save floor space, and boost order-picking accuracy. Location: The units are currently stored in Wanganui, New Zealand.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: U268893501006, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 90, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highligts: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - 90 tools in system Kfodpfx Ahew Eiw No Uoa - ready for automation ___ Basic machine G350-1006 access-SERIE Travel path X-axis: 600 mm Travel path Y-axis: 770 mm Travel path Z-axis: 805 mm Power supply 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum inlet pressure 5 bar Work area door, automatic, for manual and automatic loading/unloading Decentralized mist collector unit for the work area Machine protection concept for emulsion machining Work area lighting Machine paintwork according to GROB standard Machine cooling system with air-cooled cooling unit (4.0 kW) Operating/environmental conditions according to GROB standard Electrical equipment according to EU GROB standard Stainless-steel internal work area enclosure Fluid cabinet doors HEIDENHAIN TNC 640 machine control Control interface (HMI) in the German language Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnosis GSD Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Palette 400 x 400 mm, grid holes, without pallet changer hook Premium package -Scraper conveyor, discharge height 1,100 mm -Cutting fluid filter system -Cutting fluid tank -High-pressure cutting fluid system (5-40 bar, IKZ) -Cutting fluid low-pressure system Compressed air feed through spindle center Oil skimmer for cutting fluid care Flushing unit for the base of the work area Flush gun at the work area Flushing unit (Z-axis) Machine status light, 3-colored Preparations for use of radio and infrared signal receiver (RENISHAW) Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Kardex Shuttle XP 500 4050x813, built in 2018, in very good condition. The unit has trays measuring 4,050 mm wide and 813 mm deep, with a total of 50 trays. External dimensions of the Kardex: Height: 6,450 mm Width: 4,380 mm Depth: 2,921 mm Tray dimensions: 4050 x 813 mm Load capacity per tray: 490 kg Kfsdpfxov Su Smj Ah Usa The machine has been disassembled and palletized.

Condition: used, Year of construction: 2011, functionality: fully functional, total height: 8,550 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, 14 pieces Kardex Shuttles XP 500 of 8550mm Heights on stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Control : C3000, with OP3000 OPGraphic color display Serial No. : 11002214 Year of construction: 2011 Total Load: 2 x 33,500 kg Load per tray: MediumX: 460 kg (proportionally distributed) Tray dimensions: 3050 x 864 mm Number of trays: 32 pieces (more trays on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8550 mm (height Kardex is adjustable to available height) Power: 3/N/PE400 V, 11 A, 50/60 HZ, 4.9 kVA This offer is valid provided system is unsold Kodpfx Aownamyjh Ujfa Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays MediumX: 460 kg each, evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 8550 mm - Footprint of the system appx: 10.39 m2 - Capacity with 32 trays: appx. 84 m2, every tray is appx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with OP3000 OPGraphic color display - LED anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking - Distances can be realized in steps of 25mm by arranging the support profile. a prerequisite for high compression storage Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Year of construction: 2000, max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Max. installation height ca. 450 mm automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m The BALZAT keyway jointing machine is characterised by the following advantages: - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders Kjdpfx Aouayibjh Uefa - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil - all components are easily accessible and replaceable

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Width vertical lift module / tray: 2,980 mm / 2,650 mm Depth vertical lift module / tray: 3,074 mm / 864 mm Kjdpfxjwl Inms Ah Ujfa Number of trays: Approx. 21 trays per lift Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total height: 9,350 mm, total width: 3,980 mm, total length: 3,074 mm, load capacity per storage section: 380 kg, input voltage: 400 V, 3 pieces in stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3650x864 Control : C3000, with B/W OP3000 display Serial No. : 06009822 Year of construction: 2006 Load per tray: MediumX: 380 kg (proportionally distributed) Tray dimensions: 3650 x 864 mm Number of trays: 48 pieces (more on request) Dimensions Shuttle W x D x H: 3980 x 3074 x 9350 mm (height Kardex is adjustable to available height) Kfsdpfxewgyxte Ah Uoa Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 32,700 kg - Maximum tray capacity: 48 trays: 380 kg each, evenly distributed, More trays can be ordered. - Tray dimensions: 3650 x 864 mm - Machine dimensions: Wide x Depth x Height: 3980 x 3074 x 9350 mm - Footprint of the system appx: 12.23 m2 - Capacity with 48 trays: appx. 151 m2, every tray is appx. 3.15 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with B/W OP3000 display - LED Anti-dazzle lighting above access point - Use of toothed-belt for minimum noise - Use of toothed-belt for fastest order picking Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Year of construction: 1990, Kardex vertical carousel shelving Type: Kardex Device no.: not legible Year: 1990 Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Compartment load: 250 kg Total load: 10,000 kg Color: White Kjdpfx Ahjw E Hh Ee Uefa

Condition: excellent (used), Year of construction: 2016, A 2016 Kardex Shuttle XP 500 2450x813 is now available for sale, in excellent condition. This machine has been used in a clean environment and has received annual maintenance from the manufacturer since its installation. The unit features trays that are 2,450 mm wide and 813 mm deep. With a total of approximately 49 trays, the vertical lift module provides 97.6 m² of storage while occupying only 8.12 m² of floor space. Kedpfxjvx Rinj Ah Uefa Built with robust construction and maintained annually by the manufacturer, the machine ensures long-lasting reliability. It is the perfect solution for efficiently handling large volumes of goods in a compact space. The vertical lift module will be available for installation starting February 2025. Shipping and installation costs are not included. Specifications: Manufacturer: Kardex Remstar Manufacturing Year: 2016 Model: SHUTTLE-XP-500-2450x813 Height: 7,650 mm Width (vertical lift module / tray): 2,780 mm / 2,450 mm Depth (vertical lift module / tray): 2,921 mm / 813 mm Number of Trays: Approx. 49 Maximum Weight per Tray: 370 kg Electronics: 3/N/PE 400V, 17A